https://www.phoenixcontact.com/us/products/2944245 Solid-state relay module - EMG 10-OV-110DC/24DC/1 - 2944245 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Power solid-state relay, with LED and protective circuit in input and output circuits, input: 110 V DC, output: 5 - 36 V DC/max. 1 A The illustration shows version EMG 10-OV, with DC voltage output, max. 1A Product Features RC protective circuit Protective circuit in input and output EMG-17-OV, short-circuit-proof with indicator LED Electrical isolation Direct control with switching levels from 5 V to 230 V and up to 2 A Zero voltage switch Status indicator Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 40.53 GRM Custom tariff number 85364900 Country of origin Germany Technical data Dimensions Width 10 mm Height 75 mm 10/31/2014 Page 1 / 4 https://www.phoenixcontact.com/us/products/2944245 Solid-state relay module - EMG 10-OV-110DC/24DC/1 - 2944245 Technical data Dimensions Depth 102 mm Ambient conditions Ambient temperature (operation) -20 C ... 50 C Ambient temperature (storage/transport) -20 C ... 70 C Degree of protection IP20 Input data Nominal input voltage UN 110 V DC Input voltage range in reference to UN 0.9 ... 1.1 Switching threshold "0" signal in reference to UN 0.23 Switching threshold "1" signal in reference to UN 0.9 Typical input current at UN 4 mA Typical response time 0.1 ms Typical turn-off time 0.2 ms Status display Yellow LED Type of protection Protection against polarity reversal Protective circuit/component Polarity protection diode Transmission frequency 500 Hz Output data Output nominal voltage 24 V DC Output voltage range 5 V DC ... 36 V DC Limiting continuous current 1 A (see derating curve) Surge current 2 A (t = 1 s) Peak offstate voltage 45 V DC (Collector-emitter reverse voltage) Voltage drop at max. limiting continuous current 1V Output circuit 2-wire, floating Type of protection Protection against polarity reversal Protective circuit/component Polarity protection diode Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 4 mm Conductor cross section stranded min. 0.2 mm Conductor cross section stranded max. 2.5 mm 10/31/2014 Page 2 / 4 https://www.phoenixcontact.com/us/products/2944245 Solid-state relay module - EMG 10-OV-110DC/24DC/1 - 2944245 Technical data Connection data Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 General Test voltage input/output 3.5 kV AC 3.5 kV AC Mounting position any Assembly instructions In rows with zero spacing Operating mode 100% operating factor Inflammability class according to UL 94 V0 Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage / insulation Basic insulation Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371001 eCl@ss 7.0 27371001 eCl@ss 8.0 27371001 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39121542 10/31/2014 Page 3 / 4 https://www.phoenixcontact.com/us/products/2944245 Solid-state relay module - EMG 10-OV-110DC/24DC/1 - 2944245 Drawings Load current [A] Diagram Circuit diagram 2 A1 + 13 + A1 + 13 + A2 - 14 A2 - 14 1,5 1 20 30 40 50 60 Ambient temperature [C] DC AC Phoenix Contact 2014 (c) - all rights reserved http://www.phoenixcontact.com 10/31/2014 Page 4 / 4