Features Regulated Converters 2:1 and 4:1 Wide Input Voltage Ranges 1kVDC, 2kVD & 3kVDC Isolation UL94V-0 Package Material Continuous Short Circuit Protection Low Noise No External Capacitor needed Efficiency to 8 3 % Description High power-density, an industrial temperature range of -40C to +85C and extra features like Remote-On-Off-control are just some of the characteristics of this converter, ideal for highly sophisticated industrial designs. The RS series is available with isolation of 2kV or 3kV by chosing option "/H2" or "/H3" in which case it is also ideal for medical applications which additionally require EN-60601-1 certification. Selection Guide 5V, 12V, 24V and 48V Input Types RS Part Number Input Rated Output Output Current Voltage Range Voltageat Full Load SIP8 (VDC) (VDC) (mA) RS-xx3.3S (H2/H3) 4.5-9, 9-18 3.3 500 18-36, 36-72 RS-xx05S (H2/H3) 4.5-9, 9-18 5 400 18-36, 36-72 RS-xx09S (H2/H3) 4.5-9, 9-18 9 222 18-36, 36-72 RS-xx12S (H2/H3) 4.5-9, 9-18 12 166 18-36, 36-72 RS-xx15S (H2/H3) 4.5-9, 9-18 15 134 18-36, 36-72 RS-xx3.3D (H2/H3) 4.5-9, 9-18 3.3 250 18-36, 36-72 RS-xx05D (H2/H3) 4.5-9, 9-18 5 200 18-36, 36-72 RS-xx09D (H2/H3) 4.5-9, 9-18 9 111 18-36, 36-72 RS-xx12D (H2/H3) 4.5-9, 9-18 12 83 18-36, 36-72 RS-xx15D (H2/H3) 4.5-9, 9-18 15 67 18-36, 36-72 RS-xx3.3SZ (H2/H3) 9-36 3.3 500 18-72 RS-xx05SZ (H2/H3) 9-36 5 400 18-72 RS-xx09SZ (H2/H3) 9-36 9 222 18-72 RS-xx12SZ (H2/H3) 9-36 12 166 18-72 RS-xx15SZ (H2/H3) 9-36 15 134 18-72 RS-xx3.3DZ (H2/H3) 9-36 3.3 250 18-72 RS-xx05DZ (H2/H3) 9-36 5 200 18-72 RS-xx09DZ (H2/H3) 9-36 9 111 18-72 RS-xx12DZ (H2/H3) 9-36 12 83 18-72 RS-xx15DZ (H2/H3) 9-36 15 67 18-72 Efficiency typ. (%) 68-69 70-73 73-75 78 74-78 81 75-80 83 75-80 83 68-69 70-73 73-75 78 74-78 81 75-80 83 75-80 83 75 75 80 80 80 80 83 83 84 84 73 73 77 77 80 80 81 81 83 83 Capacitive Load max. ECONOLINE DC/DC-Converter 2 Watt SIP8 Isolated Single & Dual Output 1000F 1000F 470F 220F 100F 470F 470F 220F EN-60950-1 Certified EN-60601-1 Certified (Suffix H2/H3 ) RS 100F 47F 1000F 1000F 470F 220F 100F 470F 470F 220F 100F 2:1 Input (RS0-S/D) xx = 4.5-9Vin = 05 xx = 9-18Vin = 12 xx = 18-36Vin = 24 xx = 36-72Vin = 48 4:1 Input (RSO-SZ/DZ) xx = 9-36Vin = 24 xx = 18-72Vin = 48 47F Refer to Application Notes E-68 REV: 0/2009 www.recom-electronic.com RS-S_D(Z) Series ECONOLINE DC/DC-Converter Electrical Specifications (measured at TA = 25C, nominal input voltage, full load and after warm-up time unless otherwise specified) Input Voltage Range 2% typ. Line Voltage Regulation 20%-100% Load 0.5% max. Output Ripple and Noise (20MHz limited) 50mVp-p max. Full Load Efficiency at Full Load Quiescent Current Nominal input Voltage (Standard, /H2 and /H3) See Selection Guide RS-05xxS_D 40mA typ. RS-12xxS_D 32mA typ. RS-24xxS_D, SZ_DZ 25mA typ. RS-48xxS_D, SZ_DZ 15mA typ. H1 1000VDC min. H2 2000VDC min. H3 3000VDC min. (long term isolation) see Application Notes 2:1 Single 10pF min. / 40pF typ. / 60pF max. 2:1 Single 5pF min. / 30pF typ. / 60pF max. 2:1 Dual 120pF min. / 170pF typ. / 250pF max. 2:1 Dual 5pF min. / 30pF typ. / 60pF max. 4:1 Single/Dual 200pF max. 4:1 Single/Dual 30pF max Isolation Voltage (tested for 1 second) Rated Working Voltage Isolation Capacitance (1000V version) Isolation Capacitance (H2 and H3) Isolation Capacitance (1000V version) Isolation Capacitance (H2 and H3) Isolation Capacitance (1kV version) Isolation Capacitance (H2 and H3) Isolation Resistance 100 80 60 0 1398 x 103 hours using MIL-HDBK 217F 210 x 103 hours 150 40 30 20 0 100 150 Safe Operating Area -40 0 50 Typical Characteristics RS-24xx RS-05xx types Efficiency / Load 100 2412 80 2405 Efficiency % 40 2415 20 0 Output Power (W) 60 2 1.70 1.5 2409 0% 20% 40% 60% 80% 100% 0.5 0 4.5 5 6 7 8 9 Input Voltage (V) Total Output current (%) www.recom-international.com 1 REV:0/2009 E-69 RS using MIL-HDBK 217F 60 75 Operating Temperature C 4.7g Detailed Information see Application Notes chapter "MTBF" 100 80 95% RH Package Weight 50 100 -55C to +125C Relative Humidity 0 RS-SZ_DZ Output Power (%) Storage Temperature Range -40 85 Operating Temperature C Continuous -40C to +85C -40C to +75C 2:1 4:1 Safe Operating Area 40 30 20 1G min. Short Circuit Protection Operating Temperature Range (No Derating) (+85C) RS-S_D 100kHz min. / 300kHz max. Output Power (%) Switching Frequency } (Ambient Temperature) 0.5% max. Load Voltage Regulation MTBF (+25C) Derating-Graph 2:1 and 4:1 Output Accuracy RS-S_D(Z) Series ECONOLINE DC/DC-Converter Package Style and Pinning (mm) 3rd angle projection 8 PIN SIP Package 9.20 11.10 3.80 RECOM RS-xxxx **** 0.500.05 Recommended Footprint Details 21.80 0.32 RECOM RS-xxxx **** RECOM RS-xxxxD **** Bottom View 3.20 Top View 2.54 1 2 3 5 6 7 8 5 6 7 8 Pin Connections Pin # 1.0o+0.15/0 2.54 2.0 Dual Output 1 2 3 0.500.05 XX.X 0.5 mm XX.XX 0.25 mm Single Output Single Dual 1 -Vin -Vin 2 +Vin +Vin 3 CTRL CTRL 5 NC NC 6 +Vout +Vout 7 -Vout Com 8 NC* -Vout NC = No Connection NC* = NC, but no external Connection allowed. Notes RS Pin 8 (NC*) This pin is used internally and must have no external connection. Pin 5 (NC) Not connected internally.. Pin 3 (CTRL) This pin provides an Off function which puts the converter into a low power mode. When the pin is `high' the converter is OFF and when the pin is high `Z' the converter is ON. There is no allowed low state for this pin. Application Example TTL Remote CTRL Circuit Control Pin Input Current: +Vin Voltage Set Point Accuracy with external input/output capacitors refer to typ. 1% recommended test circuit: max. 2% Control Pin (CTRL) Input Current, control voltage applied via 1K resistor, output voltage must reduce to 0V: E-70 +Vout 10 KW 10mA (see text) Ctrl (TTL) 4.7 KW 20 KW RS-xxxxS_D(Z) -Vin typ. 3mA max. 6mA -Vout Voltage to be applied via a limiting resistor with a recommended value of 1K for RS-05xx; 3.3K for RS-12xx; RS-24xx and 10K for RS-48xx. REV: 0/2009 www.recom-electronic.com