DY (ADY1, 3) 10A MINIATURE POWER RELAY FOR INDUCTIVE LOADS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ DY RELAYS (ADY) FEATURES TYPICAL APPLICATIONS 1. Compact size: 1 Form A (10A 250V AC), 1 Form A 1 Form B (8A 250V AC) 2. Latching types available 3. Compliant with IEC EN61010-1. Reinforced insulation with 6 mm distance between input and output. 4. Electrical life of Min. 2 x 105 times (1 Form A type) realized with inductive load (cos=0.4, L/R=7ms, 5A 250V AC) 5. Socket also available. 1. Control for industrial machines (machine tools, robotics) 2. Output relays for temperature controllers, PLCs, timers, sensors. 3. Measuring equipment 4. Security equipment Product name Single side stable type 1 Form A 2 coil latching type Part No. DK1a-PS DK1a-PSL2 Single side stable type 2 coil latching type DK2a-PS DK2a-PSL2 1 Form A 1 Form B Please see "DK relay socket" for details. ORDERING INFORMATION ADY Contact arrangement 1: 1 Form A 3: 1 Form A 1 Form B Operating function 0: Single side stable 2: 2 coil latching type Auxiliary function 0: Plastic sealed/standard contact Coil voltage (DC) 03: 3, 05: 5, 06: 6, 09: 9, 12: 12, 24: 24 Note: UL/CSA, TUV approved type is standard. TYPES 1 Form A 3V DC 5V DC 6V DC 12V DC 24V DC Single side stable Part No. ADY10003 ADY10005 ADY10006 ADY10012 ADY10024 2 coil latching Part No. ADY12003 ADY12005 ADY12006 ADY12012 ADY12024 1 Form A 1 Form B 3V DC 5V DC 6V DC 12V DC 24V DC ADY30003 ADY30005 ADY30006 ADY30012 ADY30024 ADY32003 ADY32005 ADY32006 ADY32012 ADY32024 Contact arrangement Nominal coil voltage Standard packing: Tube: 50 pcs.; Case: 500 pcs. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. DY (ADY1, 3) RATING 1. Coil data 1) Single side stable Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 3V DC 5V DC 6V DC 12V DC 24V DC Nominal operating current [10%] (at 20C 68F) 66.6mA Coil resistance [10%] (at 20C 68F) Nominal operating power Max. allowable voltage (at 20C 68F) 200mW 130%V of nominal voltage 45 40mA 33.3mA 125 180 16.6mA 8.3mA 720 2,880 2) 2 coil latching Nominal coil voltage 3V DC 5V DC 6V DC 12V DC 24V DC 70%V or less of nominal voltage (Initial) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil 66.6mA 66.6mA 70%V or less of nominal voltage (Initial) 40mA 33.3mA 16.6mA 8.3mA 40mA 33.3mA 16.6mA 8.3mA Coil resistance [10%] (at 20C 68F) Set coil 45 Reset coil 45 125 180 720 2,880 125 180 720 2,880 Nominal operating power Set coil Reset coil 200mW 200mW Max. allowable voltage (at 20C 68F) 130%V of nominal voltage 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Resistive load Nominal switching Inductive load capacity (cos = 0.4, L/R = 7ms) Resistive load Inductive load (cos = 0.4, L/R = 7ms) Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Nominal operating power Max. switching capacity (Reference value) Electrical characteristics Between open contacts Between contact and coil Surge breakdown Between contact and coil voltage*2 Temperature rise (at70C 158F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Mechanical characteristics Expected life Conditions Electrical Conditions for operation, transport and storage*3 Max. operating speed (at rated load) Unit weight 5A 250V AC 3.5A 250V AC 2,500V A, 300W 2,000V A, 240W 1,250V A 875V A 380V AC, 125V DC 10 A 8A 5V 10mA 200 mW Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Insulation resistance (Initial) Breakdown voltage (Initial) Specifications 1 Form A 1 Form A 1 Form B Max. 30 m (By voltage drop 6 V DC 1A) Au-flashed AgSnO2 type 10A 250V AC, 10A 30V DC 8A 250V AC, 8A 30V DC 1,000 Vrms for 1 min. (Detection current: 10 mA) 4,000 Vrms for 1 min. (Detection current: 10 mA) 10,000 V (initial) Max. 40C (By resistive method, nominal voltage applied to the coil; max. switching current) Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) Max. 8 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 3 mm Min. 5x107 (at 300 cpm) Min. 2x105: 1 Form A inductive load (at 20 cpm) (at rated load); Min. 105: 1 Form A resistive load,1 Form A 1 Form B resistive load,1 Form A 1 Form B inductive load (at 20 cpm) (at rated load) Ambient temperature: -40C to +70C -40F to +158F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 6g .21oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Wave is standard shock voltage of 1.2x50s according to JEC-212-1981 *3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. DY (ADY1, 3) REFERENCE DATA 1-(1). Maximum switching capacity (1 Form A) 1-(2). Maximum switching capacity (1 Form A 1 Form B) 2-(1). Coil temperature rise (1 Form A) Tested sample: ADY10024 Tested sample: ADY30024 Tested sample: ADY10024, 6 pcs. Ambient temperature: 20C, 68F 10 5 DC resistive load 1 AC inductive load (cos=0.4) 10 10 5 AC inductive load (cos=0.4) DC resistive load 1 DC inductive load (L/R=7ms) 0.1 AC resistive load Temperature rise, C AC resistive load Contact current, A Contact current, A 50 DC inductive load (L/R=7ms) 100 Contact voltage, V 1,000 0.1 10 40 10A 30 0A 20 10 30 100 Contact voltage, V 0 1,000 80 90 100 110 120 130 Coil applied voltage, %V 2-(2). Coil temperature rise (1 Form A 1 Form B) 3-(1). Ambient temperature characteristics (1 Form A) 3-(2). Ambient temperature characteristics (1 Form A 1 Form B) Tested sample: ADY30024, 6 pcs. Ambient temperature: 20C, 68F Tested sample: ADY10024, 6 pcs. Ambient temperature: -40C to 70C -40F to 158F Tested sample: ADY30024, 6 pcs. Ambient temperature: -40C to 70C -40F to 158F 15 40 8A Variation ratio, % 15 Variation ratio, % Temperature rise, C 50 10 Pick up voltage Pick up voltage 10 5 5 30 0A 0 -40 -20 0 20 20 -5 10 0 80 90 100 110 120 130 Coil applied voltage, %V Drop out voltage 40 60 80 Ambient temperature, C -20 0 20 -5 -10 -10 -15 -15 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Drop out voltage 0 -40 40 60 80 Ambient temperature, C DY (ADY1, 3) DIMENSIONS (Unit: mm inch) 1. 1 Form A type PC board pattern (BOTTOM VIEW) External dimensions Single side stable type Schematic (BOTTOM VIEW) Single side stable type 20 .787 15 .591 2-0.9 dia. 2-.035 dia. 10.16 .400 Single side stable 7.62 .300 4-1.1 dia. 4-.043 dia. 9.7 .382 1 - 3 4 + 8 0.3 .012 0.4 .016 3.5 .138 0.8 .031 10.16 .400 0.8 .031 1.11 .044 7.62 .300 10.16 .400 (Deenergized condition) 0.4 .016 2.42 .095 10.16 .400 2 coil latching type 2 coil latching type 20 .787 15 .591 2-0.9 dia. 2-.035 dia. 2.54 .100 7.62 .300 2 coil latching type 7.62 .300 5-1.1 dia. 5-.043 dia. 9.7 .382 0.3 .012 0.4 .016 2.54 .100 3.5 .138 0.4 .016 7.62 .300 0.8 .031 7.62 .300 0.8 .031 1.11 .044 10.16 .400 10.16 .400 General tolerance: 0.3 .012 2. 1 Form A 1 Form B type Tolerance: 0.1 .004 PC board pattern (BOTTOM VIEW) External dimensions Single side stable type 15 .591 2-0.9 dia. 2-.035 dia. + + 8 7 10.16 .400 Since this is a polarized relay, the connection to the coil should be done according to the above schematic. Single side stable 7.62 .300 4-1.1 dia. 4-.043 dia. 9.7 .382 1 - 3.5 .138 0.8 .031 10.16 .400 7.62 .300 0.8 .031 1.11 .044 10.16 .400 4 6 5 (Deenergized condition) 0.4 .016 2.42 .095 10.16 .400 2 coil latching type 2 coil latching type 20 .787 15 .591 2-0.9 dia. 2-.035 dia. 2.54 .100 7.62 .300 2 coil latching type 7.62 .300 5-1.1 dia. 5-.043 dia. 9.7 .382 0.3 .012 0.4 .016 2.54 .100 3 + 8 0.3 .012 0.4 .016 4 Schematic (BOTTOM VIEW) Single side stable type 20 .787 3 (Reset condition) 0.4 .016 2.42 .095 1 - 3.5 .138 0.4 .016 7.62 .300 0.8 .031 7.62 .300 0.8 .031 1.11 .044 10.16 .400 10.16 .400 General tolerance: 0.3 .012 Tolerance: 0.1 .004 NOTES 1. Soldering should be done under the following conditions: 250C 482F within 10s 300C 572F within 5s 350C 662F within 3s Soldering depth: 2/3 terminal pitch 2. External magnetic field Since DY relays are highly sensitive polarized relays, their characteristics will be affected by a strong external magnetic field. Avoid using the relay under that condition. + + 8 7 3 4 6 5 (Reset condition) 0.4 .016 2.42 .095 1 - 3. When using, please be aware that the A contact and B contact sides of 1 Form A and 1 Form B types may go on simultaneously at operate time and release time. For Cautions for Use, see Relay Technical Information. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Since this is a polarized relay, the connection to the coil should be done according to the above schematic.