https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page1/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology
(Selective Fuse Breaking), input:3-phase, output: 48 VDC / 20 A
Product Description
QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system
protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states
before errors occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V
DC ... 56 V DC are covered.
Your advantages
Adjustable output voltage of 30 to 56 V DC
Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently
Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal
current for 12 ms
Preventive function monitoring indicates critical operating states before errors occur
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356547734
Weight per Piece (excluding packing) 2,960.000 g
Custom tariff number 85044030
Country of origin Thailand
Technical data
Dimensions
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page2/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Technical data
Dimensions
Width 96 mm
Height 130 mm
Depth 179 mm
Width with alternative assembly 176 mm
Height with alternative assembly 130 mm
Depth with alternative assembly 99 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested) -40 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2
Installation height 4000 m
Input data
Nominal input voltage range 3x 400 VAC ... 500 VAC
Input voltage range 3x 320 VAC ... 575 VAC
2x 360 VAC ... 575 VAC (Not approved by UL)
450 VDC ... 800 VDC
AC frequency range 45 Hz ... 65 Hz
Frequency range DC 0 Hz
Discharge current to PE < 3.5 mA
Current consumption 3x 2.1 A (400VAC)
3x 1.7 A (500 VAC)
1.7 A (600 VDC)
Nominal power consumption 1386 VA
Inrush current < 20 A (typical)
Mains buffering time typ. 25 ms (400VAC)
typ. 35 ms (500 VAC)
Recommended breaker for input protection 6 A ... 16 A (AC: Characteristics B, C, D, K)
Type of protection Transient surge protection
Protective circuit/component Varistor
Output data
Nominal output voltage 48 VDC ±1%
Setting range of the output voltage (USet)30 VDC ... 56 VDC (> 48VDC, constant capacity restricted)
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page3/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Technical data
Output data
Nominal output current (IN) 20 A (-25°C...60°C, UOUT = 48VDC)
POWER BOOST (IBoost) 22.5 A (-25°C...40°C permanent, UOUT = 48VDC )
Selective Fuse Breaking (ISFB)100 A (12 ms)
Derating 60 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series yes
Feedback voltage resistance max. 60 VDC
Protection against overvoltage at the output (OVP) < 60 VDC
Active current limitation Approx. IBOOST = 22.5 A (for short-circuit)
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 4 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 50 mVPP (with nominal values)
Output power 960 W
Typical response time < 1 s
Maximum power dissipation in no-load condition 24 W
Power loss nominal load max. 70 W
General
Net weight 2.5 kg
Efficiency > 93 % (at 400 V AC and nominal values)
MTBF (IEC 61709, SN 29500) > 890000 h (25°C)
> 509000 h (40°C)
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 3.5 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 VDC (routine test)
Degree of protection IP20
Protection class I
Housing material Steel sheet, zinc-plated
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: PN ≥50%, 5mm horizontally, 15mm next to active components,
50mm vertically
alignable: PN <50%, 0mm horizontally, 40mm vertically top, 20 mm
vertically bottom
Connection data, input
Connection method Screw connection
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page4/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Technical data
Connection data, input
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 10
Stripping length 7 mm
Screw thread M3
Connection data, output
Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 16 mm²
Conductor cross section AWG min. 8
Conductor cross section AWG max. 6
Stripping length 10 mm
Screw thread M3
Connection data for signaling
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 10
Screw thread M3
Standards
EMC requirements for noise immunity EN61000-6-1
EN61000-6-2
EMC requirements for noise emission EN61000-6-3
EN61000-6-4
Standard - Safety of transformers IEC 61558-2-17
Standard - Electrical safety IEC60950-1/VDE0805 (SELV)
Standard – Electronic equipment for use in electrical power installations
and their assembly into electrical power installations EN50178/VDE0160 (PELV)
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page5/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Technical data
Standards
Standard – Safety extra-low voltage IEC60950-1 (SELV) and EN60204-1 (PELV)
Standard - Safe isolation DINVDE0100-410
Standard – Protection against shock currents, basic requirements for
protective separation in electrical equipment EN50178
Standard – Limitation of mains harmonic currents EN61000-3-2
Standard - Equipment safety BG (design tested)
Standard - Approval for medical use IEC60601-1, 2xMOOP
Rail applications EN50121-4
Conformance/approvals
UL approvals UL Listed UL508
UL/C-UL Recognized UL 60950-1 (3-wire + PE, star net)
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous
Location)
CSA CAN/CSA-C22.2 No.60950-1-07
CSA-C22.2 No.107.1-01
EMC data
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge EN 61000-4-2
Contact discharge 8 kV (Test Level 4)
Discharge in air 15 kV (Test Level 4)
Electromagnetic HF field EN61000-4-3
Frequency range 80 MHz ... 1 GHz
Test field strength 20 V/m (Test Level 3)
Frequency range 1 GHz ... 2 GHz
Test field strength 10 V/m (Test Level 3)
Frequency range 2 GHz ... 3 GHz
Test field strength 10 V/m (Test Level 3)
Comments Criterion A
Fast transients (burst) EN61000-4-4
Input 4 kV (Test Level 4 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Signal 2 kV (Test Level 4 - asymmetrical)
Comments Criterion A
Surge voltage load (surge) EN61000-4-5
Input 2 kV (Test Level 3 - symmetrical)
6 kV (Test Level 4 - asymmetrical)
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page6/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Technical data
EMC data
Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion A
Conducted interference EN61000-4-6
I/O/S asymmetrical
Frequency range 0.15 MHz ... 80 MHz
Voltage 10 V (Test Level 3)
Comments Criterion A
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the
device itself.
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
L1 (+)
L2
L3 (-)
13
I < IN
DC OK
14
Classifications
eCl@ss
eCl@ss 10.0.1 27040701
eCl@ss 11.0 27040701
eCl@ss 4.0 27040700
eCl@ss 4.1 27040700
eCl@ss 5.0 27242200
eCl@ss 5.1 27242200
eCl@ss 6.0 27049000
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page7/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Classifications
eCl@ss
eCl@ss 7.0 27049002
eCl@ss 8.0 27049002
eCl@ss 9.0 27040701
ETIM
ETIM 3.0 EC001039
ETIM 4.0 EC002540
ETIM 5.0 EC002540
ETIM 6.0 EC002540
ETIM 7.0 EC002540
UNSPSC
UNSPSC 6.01 30211502
UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121004
UNSPSC 18.0 39121004
UNSPSC 19.0 39121004
UNSPSC 20.0 39121004
UNSPSC 21.0 39121004
Approvals
Approvals
Approvals
CSA / UL Listed / UL Recognized / cUL Recognized / IECEE CB Scheme / cUL Listed / EAC / Type approved / EAC / cULus Recognized / cULus Listed
Ex Approvals
UL Listed / cUL Listed / cULus Listed
Approval details
CSA http://www.csagroup.org/services-industries/product-listing/ 2386029
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page8/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Approvals
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 211944
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 211944
IECEE CB Scheme http://www.iecee.org/ SI-2899
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528
EAC EAC-Zulassung
Type approved 005-006
EAC RU*DE*08.B.01873/19
cULus Recognized
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page9/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Approvals
cULus Listed
Accessories
Accessories
Assembly adapter
Assembly adapters-UWA 182/52-2938235
Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly
onto the mounting surface. The universal wall adapter is attached on the top/bottom.
Device protection
Type 3 surge protection device-PLT-SEC-T3-3S-230-FM-2905230
Plug-in device protection, according to type 3/class III, for 3-phase power supply networks with separate N and PE (5-
conductor system: L1, L2, L3, N, PE), with integrated surge-proof fuse and remote indication contact.
Type 3 surge protection device-PLT-SEC-T3-60-FM-UT-2907917
Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote
signaling for single-phase power supply networks. Nominal voltage 60VAC/DC.
Mounting rail adapter
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page10/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Accessories
DIN rail adapter-UTA 107-2853983
Universal DIN rail adapter, for screwing on switchgear
Redundancy module
Diode-QUINT-DIODE/48DC/2X20/1X40-2320160
DIN rail diode module 48 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
Redundancy module-TRIO-DIODE/48DC/2X10/1X20-2866527
Redundancy module with function monitoring, 48 V DC, 2x 10 A, 1x 20 A
Thermomagnetic device circuit breakers
Thermomagnetic device circuit breaker-CB TM1 1A SFB P-2800836
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Thermomagnetic device circuit breaker-CB TM1 2A SFB P-2800837
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page11/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Accessories
Thermomagnetic device circuit breaker-CB TM1 3A SFB P-2800838
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Thermomagnetic device circuit breaker-CB TM1 4A SFB P-2800839
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Thermomagnetic device circuit breaker-CB TM1 5A SFB P-2800840
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Thermomagnetic device circuit breaker-CB TM1 6A SFB P-2800841
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Thermomagnetic device circuit breaker-CB TM1 8A SFB P-2800842
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
https://www.phoenixcontact.com/us/products/2320827
01/16/2021Page12/12
Power supply unit-QUINT-PS/3AC/48DC/20-2320827
Accessories
Thermomagnetic device circuit breaker-CB TM1 10A SFB P-2800843
Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com