PCB Keyswitches Page MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitches MICON 5 - Plungers round, not illuminable MICON 5 - Plungers square, illuminable 4-3 4-4 4-8 4 - 12 RACON - Short-travel keyswitches RACON 8 - Short-travel keyswitch RACON 12 - Short-travel keyswitch RACON 12 V - Short-travel keyswitch with vertical adapter RACON 12 i - Short-travel keyswitch RACON - Special accessories RK 90 II - Key cap system for RACON 12 with individual sealing NEW 4 - 17 4 - 18 4 - 22 4 - 26 4 - 28 4 - 32 4 - 36 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch RF 15 N - Short-travel keyswitch RF 15 R - Short-travel keyswitch RF 15 H - Short-travel keyswitch RF 15 - Signal indicator RF 19 - Short-travel keyswitch RF 19 H - Short-travel keyswitch RF 19 - Signal indicator RF 15/19 - Special accessories 4 - 39 4 - 42 4 - 48 4 - 52 4 - 58 4 - 62 4 - 66 4 - 72 4 - 76 4 - 80 KN 19 - Short-travel main switch KN 19 - Short-travel main switch 4 - 85 4 - 86 RK 90 - Keycaps RK 90 - Keycaps, plastic, 9 x 9 mm RK 90 - Keycaps, plastic, 14 mm RK 90 - Keycaps, aluminum, 14 x 14 mm RK 90 - Special accessories 4 - 89 4 - 92 4 - 94 4 - 98 4 - 100 RG 85 III - Short-travel system RG 85 III - Keyswitch RG 85 III - Keylock switch RG 85 III - Signal indicator, without lens RG 85 III - Accessories 4 - 103 4 - 106 4 - 110 4 - 114 4 - 116 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, illuminable RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, illuminable RS 76 - Keycaps, not illuminable RS 76 - Keycaps, illuminable RS 76 - Keycaps, with legend, two-shot moulded/keycap sets RS 76 - Accessories 4 - 125 4 - 132 4 - 134 4 - 138 4 - 140 4 - 142 4 - 144 4 - 148 4 - 150 Keylock and rotary switches for PCB MICROMEC - Keylock switch IP54 EUROLOCKS - Keylock switch IP54 Priority keylock switch IP54 Rotary switch IP40 4 - 153 4 - 154 4 - 158 4 - 160 4 - 162 PCB Keyswitches 4-1 4 PCB Keyswitches Examples for Applications Standards MICON 5 CE-Conformity The products of the Chapter "PCB Keyswitches" can - relating to the CE-conformity according to the Low-Voltage Directive 73/23/EWG - be divided into the following groups: All products with an operating voltage UB > 50 V F. ex. Short-Travel Main Switch KN 19, for this product the Low-Voltage Directive 73/23/EWG applies. All products with an operating voltage UB < 50 V F. ex. MICON, RACON, RF 15, RS 76, for these components no directive applies. RF 15 Single parts, accessories and illumination No directive applies for these products. EMC-Law The components of this catalogue are within the meaning of the law concerning the electromagnetic conformity (= EMC-Law) "basic components as, for ex., switches, signal lamps or like" and, therefore, do not fall within the scope of the EMC-Law. 4 RG 85 III System Declarations of Conformity Declarations of conformity for all concerned products are available and can be delivered upon request. Please always state the exact order reference of the respective product. Marking The marking will be corresponding to the Low-Voltage Directive 73/23/EWG resp. the Directive "CE-Marking 93/68/EWG" either on the packing or on the product itself or on the shipping documents. UL-approval RF 15 with RK 90 System for MICON 5, RACON 8/12, Short-Travel Keyswitches RF 15/19 Data entry systems wich are built with Rafi short-travel switches according to our design proposals meet the requirements of the UL approvals for the American market. UL file no. for KN 19: E 116362 UL file no. for data entry systems: E 202520 4-2 PCB Keyswitches MICON 5 - Short-travel keyswitches General Data Short-travel switch range MICON 5, with sealed contact system, clear key click and extremely reliable switching. Use under overlay or under keycaps RK 90. THT and SMT versions which can be mounted automatically. Content MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitch, SMT Standard MICON 5 - Short-travel keyswitch, SMT low MICON 5 - Short-travel keyswitch, THT Standard 4-4 4-6 4-7 4-7 MICON 5 - Plungers round, not illuminable NEW MICON 5 - Plunger opaque, round, not illuminable 4-8 4-9 MICON 5 - Plungers square, illuminable NEW MICON 5 - Plunger square, illuminable, 11 x 11 mm MICON 5 - Plunger square, illuminable, 14.5 x 14.5 mm MICON 5 - Plunger square, illuminable, 18 x 18 mm 4 - 12 4 - 13 4 - 14 4 - 15 4 MICON PCB Keyswitches 4-3 MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitches General Data MICON 5 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, MICON keyswitches should be combined with plungers. The features at a glance: s 3UITABLE FOR THE MOST COMMON SOLDERING METHODS - Wave soldering bath for THT versions 2EFLOW SOLDERING FOR 3-4 VERSION 6APOUR PHASE SOLDERING FOR 3-4 VERSIONS - Manual soldering s 3-4 VERSION SUITABLE FOR PROCESSING WITH AN AUTOMATIC 3-4 ASSEMBLY MACHINES s )-$3 LISTED 4 9OU CAN DOWNLOAD ACTUAL PRODUCT INFORMATION FROM OUR INTERNET SITE WWWRAFIDE #ATALOGUES AND $OWNLOADS Technical Data MICON Dimensions Length of housing Width of housing Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force F1 (20%) 3WITCHING TRAVEL 3 (0.15 mm) Electrical characteristics Rated voltage min. Rated voltage max. 4-4 6.4 mm 5.1 mm see order block soldering see order block snap-action contact 1 NO Au no see order block see order block Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new Rated voltage restistance AC Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life (test force) 3OLDER HEAT RESISTANCE 3OLDERABILITY Flammability of materials Packing Produkt code 0.01 mA 100 mA 1W 100 mE 250 V 109 E -40 C +90 C IEC 60068-2 -14, -30,-33, -78 see order block see order block UL 94 V1 see order block see order block 0.02 V 35 V PCB Keyswitches MICON 5 - Short-travel keyswitches MICON 5 Circuit Diagram MICON 5 Force-Travel Diagram Operating force F1: see order block Switching travel S2: see order block MICON 5 Product Code acc. to DIN EN ISO 9001 (EN ISO 8402) day week year shift type Traceability acc. to (EN ISO 8402) DIN EN ISO 9001, 2000, 7.5.3 A 7-digit code is printed on the housing of the keyswitch. This code informs about production date, production shift and type of product. machine 4 MICON 5 SMT Version, Tape and Reel Drawing MICON PCB Keyswitches 4-5 MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitch, SMT Standard 3.85 0.10 2.45 0.35 6.40 0.10 5.10 0.10 0.05 0.05 Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0,15 mm) Operating life (test force) SMT % $). )%# 600 68-2-58 % $). )%# 600 68-2-58 % $). )%# 600 68-2-58 % $). )%# 600 68-2-58 3.0 N 0.7 mm 1,000,000 (4 N) X 1.14.002.101/0000 4.5 N 0.8 mm 250,000 (6 N) 1.14.002.001/0000 5.5 N 0.9 mm 1,000,000 (8 N) W 1.14.002.111/0000 8.0 N 1.1 mm 250,000 (12 N) 1.14.002.011/0000 SMT SMT SMT Produkt code Z Y Order no. Technical data see page 4 - 4 Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: 348514-02), mounting with collect and place head Recommendation for screen printing: 150 m stencil with 10% reduction of the pad size. 4 MICON 4-6 Stock items are marked by bold printed order numbers. PCB Keyswitches MICON 5 - Short-travel keyswitches MICON 5 - Short-travel keyswitch, SMT low NEW 3.45 0.10 0.35 6.40 0.10 5.10 0.10 0.05 0.05 Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0,15 mm) Operating life (test force) SMT E DIN IEC 600 68-2-58 E DIN IEC 600 68-2-58 E DIN IEC 600 68-2-58 3.0 N 0.6 mm 1,000,000 (4 N) S 1.14.002.103/0000 4.5 N 0.7 mm 250,000 (6 N) T 1.14.002.003/0000 5.5 N 0.7 mm 1,000,000 (8 N) R 1.14.002.113/0000 SMT SMT Produkt code Order no. Technical data see page 4 - 4 Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: 348514-02), mounting with collect and place head Recommendation for screen printing: 150 m stencil with 10% reduction of the pad size. MICON 5 - Short-travel keyswitch, THT Standard 2.40 4 6.35 3.80 0.10 0.35 Pad-O 1.50 2.54 6.40 0.20 6.40 0.10 Hole-O 0.70 5.10 0.10 Terminals Solder heat resistance / Solderability Operating force F1 (20%) Switching travel S2 (0,15 mm) Operating life (test force) THT E DIN IEC 600 68-2-20 E DIN IEC 600 68-2-20 E DIN IEC 600 68-2-20 E DIN IEC 600 68-2-20 3.0 N 0.7 mm 1,000,000 (4 N) O 1.14.002.106/0000 4.5 N 0.8 mm 250,000 (6 N) Q 1.14.002.006/0000 5.5 N 0.9 mm 1,000,000 (8 N) N 1.14.002.116/0000 8.0 N 1.1 mm 250,000 (12 N) 1.14.002.016/0000 THT THT THT Produkt code MICON P Order no. NEW Technical data see page 4 - 4 Packing: in tubes with 102 pieces Keycaps see RK 90 PCB Keyswitches Stock items are marked by bold printed order numbers. 4-7 MICON 5 - Short-travel keyswitches NEW MICON 5 - Plungers round, not illuminable General Data A - Height of keyswitch: SMT type: 3.85 mm, THT type: 3.80 mm D - Length of spacer D = GH - KP - FP FD - Front panel cut-out FD = ST + 1 mm FP - Front panel thickness GH - Overall height: GH = A + L1 + 0.05 (SMT type), GH = A + L 1 (THT type) KP - Thickness of overlay + embossing KS - Glue webs for overlay, min. 3 mm L1 - Length of plunger above keyswitch L1 = GH - A L - Overall length of plunger L = L1 + 1.3 mm (min. 3 mm) RM - Key grid RM = FD + KS ST - Diameter of plunger The plungers can only be combined with MICON 5 version Standard (red bubble). 4 Technical Data MICON General information Plunger diameter/size Length of plunger L 4-8 see order block see order block PCB Keyswitches MICON 5 - Short-travel keyswitches MICON 5 - Plunger opaque, round, not illuminable NEW Plunger diameter/size Length of plunger L Order no. 6.0 mm 3.00 mm 5.46.001.103/0200 6.0 mm 3.45 mm 5.46.001.104/0200 6.0 mm 3.95 mm 5.46.001.105/0200 6.0 mm 4.45 mm 5.46.001.106/0200 6.0 mm 7.15 mm 5.46.001.107/0200 6.0 mm 9.95 mm 5.46.001.108/0200 8.0 mm 3.00 mm 5.46.001.123/0200 8.0 mm 3.45 mm 5.46.001.124/0200 8.0 mm 3.95 mm 5.46.001.125/0200 8.0 mm 4.45 mm 5.46.001.126/0200 8.0 mm 5.50 mm 5.46.001.121/0200 8.0 mm 7.15 mm 5.46.001.127/0200 8.0 mm 9.95 mm 5.46.001.128/0200 8.0 mm 10.30 mm 5.46.001.122/0200 11.5 mm 3.00 mm 5.46.001.143/0200 11.5 mm 3.45 mm 5.46.001.144/0200 11.5 mm 3.95 mm 5.46.001.145/0200 11.5 mm 4.45 mm 5.46.001.146/0200 11.5 mm 5.50 mm 5.46.001.141/0200 11.5 mm 7.15 mm 5.46.001.147/0200 11.5 mm 9.95 mm 5.46.001.148/0200 11.5 mm 10.30 mm 5.46.001.142/0200 PCB Keyswitches Stock items are marked by bold printed order numbers. 4-9 4 MICON MICON 5 - Short-travel keyswitches Plunger diameter/size Length of plunger L Order no. 14.5 mm 3.00 mm 5.46.001.163/0200 14.5 mm 3.45 mm 5.46.001.164/0200 14.5 mm 3.95 mm 5.46.001.165/0200 14.5 mm 4.45 mm 5.46.001.166/0200 14.5 mm 7.15 mm 5.46.001.167/0200 14.5 mm 9.95 mm 5.46.001.168/0200 19.0 mm 3.00 mm 5.46.001.183/0200 19.0 mm 3.45 mm 5.46.001.184/0200 19.0 mm 3.95 mm 5.46.001.185/0200 19.0 mm 4.45 mm 5.46.001.186/0200 19.0 mm 7.15 mm 5.46.001.187/0200 19.0 mm 9.95 mm 5.46.001.188/0200 Technical data see page 4 - 8 Can only be combined with MICON 5 version Standard (red bubble) 4 MICON 4 - 10 Stock items are marked by bold printed order numbers. PCB Keyswitches 5 N O C I M AUTOMOTIVE There is no miniature keyswitch which has a better tactile and acoustic feedback than the new RAFI MICON 5 short-travel keyswitch. . t i l e e : Jus t f INSTRUMENTATION-CONTROLAUTOMATION The little one shows its excellence under keycaps, membrane overlays or elastic seals. Outstanding tactile feedback and absolutely MEDICAL TECHNOLOGY reliable switching behaviour in demanding applications, including hostile environments. MICON 5 - test it! For samples and information, please contact: info@rafi.de RAFI GmbH & Co. KG D-88276 Berg/Ravensburg Phone: +49 751 89-0, Fax: +49 751 89-13 00 www.rafi.de, info@rafi.de MICON 5 - Short-travel keyswitches NEW MICON 5 - Plungers square, illuminable General Data Description ! (EIGHT OF KEYSWITCH 3-4 MM 4(4 MM FP - Thickness of front plate B - Width of plunger (11 x 11 mm, 14,5 x 14,5 mm or 18 x 18 mm) &$ &RONT PANEL CUT OUT " MM +3 'LUE STRIP MIN MM 2 'RID SIZE &$ +3 '( /VERALL HEIGHT ! MM The plungers can only be combined with MICON 5 version Standard (red bubble). Technical Data 4 General information /VERALL HEIGHT '( Colour of lens see order block see order block MICON 4 - 12 PCB Keyswitches MICON 5 - Short-travel keyswitches MICON 5 - Plunger square, illuminable, 11 x 11 mm NEW 0IC WITH ,%$ /32!- ,/ - 12 Overall height GH Colour of lens Order no. 9.70 mm red 5.05.511.470/2300 9.70 mm green 5.05.511.470/2500 9.70 mm yellow 5.05.511.470/2400 9.70 mm white 5.05.511.470/2200 9.70 mm blue 5.05.511.470/2600 12.50 mm red 5.05.511.471/2300 12.50 mm green 5.05.511.471/2500 12.50 mm yellow 5.05.511.471/2400 12.50 mm white 5.05.511.471/2200 12.50 mm blue 5.05.511.471/2600 12.50 mm opaque blue 5.05.511.476/0600 4 Technical data see page 4 - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 13 MICON 5 - Short-travel keyswitches NEW MICON 5 - Plunger square, illuminable, 14.5 x 14.5 mm 0IC WITH ,%$ /32!- ,/ - 12 4 Overall height GH Colour of lens Order no. 9.70 mm red 5.05.511.475/2300 9.70 mm green 5.05.511.475/2500 9.70 mm yellow 5.05.511.475/2400 9.70 mm white 5.05.511.475/2200 9.70 mm blue 5.05.511.475/2600 12.50 mm red 5.05.511.476/2300 12.50 mm green 5.05.511.476/2500 12.50 mm yellow 5.05.511.476/2400 12.50 mm white 5.05.511.476/2200 12.50 mm blue 5.05.511.476/2600 Technical data see page 4 - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON 4 - 14 Stock items are marked by bold printed order numbers. PCB Keyswitches MICON 5 - Short-travel keyswitches MICON 5 - Plunger square, illuminable, 18 x 18 mm NEW 0IC WITH ,%$ /32!- ,/ - 12 Overall height GH Colour of lens Order no. 9.70 mm red 5.05.511.480/2300 9.70 mm green 5.05.511.480/2500 9.70 mm yellow 5.05.511.480/2400 9.70 mm white 5.05.511.480/2200 9.70 mm blue 5.05.511.480/2600 12.50 mm red 5.05.511.481/2300 12.50 mm green 5.05.511.481/2500 12.50 mm yellow 5.05.511.481/2400 12.50 mm white 5.05.511.481/2200 12.50 mm blue 5.05.511.481/2600 4 Technical data see page 4 - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 15 RACON - Short-travel keyswitches General Data RACON short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available (suitable for automatic assembly). Content RACON 8 - Short-travel keyswitch RACON 8 - Short-travel keyswitch, THT outward RACON 8 - Short-travel keyswitch, THT inward RACON 8 - Short-travel keyswitch, SMT gullwing (Z) terminals 4 - 18 4 - 20 4 - 20 4 - 21 RACON 12 - Short-travel keyswitch RACON 12 - Short-travel keyswitch solder terminals for PCB, outward RACON 12 - Short-travel keyswitch solder terminals for PCB, inward RACON 12 - Short-travel keyswitch SMT gullwing (Z) terminals 4 - 22 4 - 24 4 - 25 4 - 25 RACON 12 V - Short-travel keyswitch with vertical adapter RACON 12 V - Short-travel keyswitch with vertical adapter 4 - 26 4 - 27 RACON 12 i - Short-travel keyswitch RACON 12 i - Short-travel keyswitch 4 - 28 4 - 30 RACON - Special accessories Plunger round Square plunger for membrane data entry system 4 - 32 4 - 32 4 - 34 RK 90 II - Key cap system for RACON 12 with individual sealing RK 90 II - Sealing frame PCB Keyswitches NEW 4 - 36 4 - 37 4 - 17 4 RACON RACON - Short-travel keyswitches production month (03.) 3 F 2 0 1 1 production shift (1) production day (21.) 2 product code (F1) 1 RACON 8 - Short-travel keyswitch production year (2002) General Data RACON 8 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON keyswitches should be combined with plungers. 4 The features at a glance: s 3UITABLE FOR THE MOST COMMON SOLDERING METHODS - Wave soldering bath for THT versions 2EFLOW SOLDERING FOR 3-4 VERSION 6APOUR PHASE SOLDERING FOR 3-4 VERSIONS -ANUAL SOLDERING s 3-4 VERSION SUITABLE FOR PROCESSING WITH AN AUTOMATIC 3-4 ASSEMBLY MACHINE s )-$3 LISTED 9OU CAN DOWNLOAD ACTUAL PRODUCT INFORMATION FROM OUR INTERNET SITE WWWRAFIDE #ATALOGUES AND $OWNLOADS Technical Data Dimensions Length of housing Width of housing Height of housing 8.4 mm 8.4 mm see order block RACON Mechanical design -OUNTING Terminals Contact system Contact arrangement Contact materials )LLUMINATION soldering see order block snap-action contact 1 NO Au no Mechanical characteristics Operating force 3WITCHING TRAVEL 3.30.6 N 0.340.1 mm Electrical characteristics Rated voltage min. Rated voltage max. 4 - 18 0.02 V 35 V Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. )NSULATION RESISTANCE Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life 3OLDERABILITY 3OLDER HEAT resistance Flammability of materials Packing Produkt code 0.01 mA 100 mA 1W 100 mE 109 E -40 C +90 C $). %. -30,-33 and -78 1,000,000 see order block UL 94 HB see order block see order block PCB Keyswitches RACON - Short-travel keyswitches RACON 8, Typical System Assembly with Plunger under Overlay L 0.10 GH A SMT gullwing (Z) terminal GH L THT terminal for PCB, inward A THT terminal for PCB, outward Variable Declaration A GH L THT terminal outward THT terminal inward SMT-terminal A = 4.90 +/- 0.1 mm GH = A + L L = GH - A Height of keyswitch Overall height Length of plunger GH = A + L + 0.1 mm L = GH - A - 0.1 mm RACON 8, PCB Hole Pattern, Smallest Grid THT terminal for PCB, outward THT terminal for PCB, inward SMT gullwing (Z) terminal 4 view on component side RACON 8, SMT Terminal, Tape and Reel Drawing view on component side view on component side Circuit Diagram RACON 8 Typical Force-Travel Diagram RACON Switching symbols acc. to IEC 617 form X (twice interrupting) PCB Keyswitches 4 - 19 RACON - Short-travel keyswitches Typical accessories RACON 8 - Short-travel keyswitch Description Photo Order no. Spacer, round, length 6.25 mm, red Additional accessories see page 5.30.759.034/0000 2 - 231, 4 - 82, 5 - 30 Plunger round 5.46.167.311/0209 4 - 32 RK 90 - Keycap body, for lenses 9 x 9 mm 5.55.103.265/1013 4 - 93 For other plungers, refer to the chapter RACON special accessories"; for keycaps, refer to the chapter RK 90". RACON 8 - Short-travel keyswitch, THT outward PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance Produkt code Packing Order no. THT outward 3.30.6 N E DIN IEC 600 68-2-20 A1 tubes a 60 piece 1.14.100.501/0000 Technical data see page 4 - 18 4 For keycaps refer to chapter RK 90", plungers see RACON special accessories". RACON 8 - Short-travel keyswitch, THT inward RACON PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance Produkt code Packing Order no. THT inward 3.30.6 N E DIN IEC 600 68-2-20 B1 tubes a 60 piece 1.14.100.502/0000 Technical data see page 4 - 18 For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4 - 20 Stock items are marked by bold printed order numbers. PCB Keyswitches RACON - Short-travel keyswitches RACON 8 - Short-travel keyswitch, SMT gullwing (Z) terminals 3.50 3.57 8.40 10 .60 0.70 4.50 11.00 +0.5 0.10 4.90 0.10(A) PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance Produkt code Packing Order no. SMT Gullwing (Z) terminals 3.30.6 N E DIN IEC 600 68-2-58 C1 tape and reel a 1000 pieces 1.14.100.503/0000 Technical data see page 4 - 18 For keycaps refer to chapter RK 90", plungers see RACON special accessories". 4 RACON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 21 RACON - Short-travel keyswitches production month (03.) 3 F 2 0 1 1 production shift (1) production day (21.) 2 product code (F1) 1 RACON 12 - Short-travel keyswitch production year (2002) General Data RACON 12 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON keyswitches should be combined with plungers. The features at a glance: s 3UITABLE FOR THE MOST COMMON SOLDERING METHODS - Wave soldering bath for THT versions - Reflow soldering for SMTversions - Vapour phase soldering for SMT versions - Manual soldering s 3-4 VERSION SUITABLE FOR PROCESSING WITH AN AUTOMATIC 3-4 ASSEMBLY MACHINE s )-$3 LISTED 4 Technical Data RACON Dimensions Length of housing Width of housing Overall height 12 mm 12 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination soldering see order block snap-action contact 1 NO Au no Mechanical characteristics Operating force Switching travel see order block see order block Electrical characteristics Rated voltage min. Rated voltage max. 4 - 22 0.02 V 35 V Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Resistance to environment Operating life Solderability / Solder heat resistance Flammability of materials Packing Produkt code 0.01 mA 100 mA 1W 100 mE 109 E -40 C +90 C DIN EN 60068-2 -14, -30,-33 and -78 1,000,000 see order block UL 94 HB see order block see order block PCB Keyswitches RACON - Short-travel keyswitches RACON 12, Typical System Assembly with Plunger under Overlay L L 0.10 A GH GH A GH SMT gullwing (Z) terminal A THT terminal for PCB, inward L THT terminal for PCB, outward Variable Declaration A GH L THT terminal outward THT terminal inward SMT-terminal A = 4.95 +/- 0.1 mm GH = A + L L = GH - A Height of keyswitch Overall height Length of plunger GH = A + L + 0.1 mm L = GH - A - 0.1 mm RACON 12, PCB Hole Pattern, Smallest Grid THT terminal for PCB, inward SMT gullwing (Z) terminal view on component side RACON 12, SMT Terminal, Tape and Reel Drawing RMmin = 12.50 view on component side 11.30 max 15.80 min RMmin = 16.50 RMmin = 12.50 5.00 O 1.20 10.00 0.10 RMmin = 12.50 RMmin =15.24 5.00 O 1.20 12.50 0.10 RMmin = 12.50 1.60 5.00 THT terminal for PCB, outward 4 view on component side Circuit Diagram RACON 12 Typical Force-Travel Diagram RACON Switching symbols acc. to IEC 617 form X (twice interrupting) PCB Keyswitches 4 - 23 RACON - Short-travel keyswitches Typical accessories RACON 12 - Short-travel keyswitch Description Photo Order no. Spacer, round, length 6.25 mm, red Additional accessories see page 5.30.759.034/0000 2 - 231, 4 - 82, 5 - 30 Square plunger for membrane data entry system 5.46.001.057/0209 4 - 34 Plunger round 5.46.168.050/0209 4 - 33 RK 90 - Keycap body, for lens 1 -module 5.55.103.030/1013 4 - 95 For other plungers, refer to the chapter RACON special accessories"; for keycaps, refer to the chapter RK 90". RACON 12 - Short-travel keyswitch solder terminals for PCB, outward PCB footprint, view on component side 4 Terminals Operating force Switching travel Solderability / Solder heat resistance Produkt code Packing Order no. THT outward 3.60.7 N 0.610.1 mm E DIN IEC 600 68-2-20 A1 tubes a 45 pieces 1.14.001.501/0000 Technical data see page 4 - 22 For keycaps refer to chapter RK 90", plungers see RACON special accessories". RACON 4 - 24 Stock items are marked by bold printed order numbers. PCB Keyswitches RACON - Short-travel keyswitches RACON 12 - Short-travel keyswitch solder terminals for PCB, inward PCB footprint, view on component side Terminals Operating force Switching travel Solderability / Solder heat resistance Produkt code Packing Order no. THT outward 3.60.7 N 0.610.1 mm E DIN IEC 600 68-2-20 B1 tubes a 45 pieces 1.14.001.502/0000 Technical data see page 4 - 22 For keycaps refer to chapter RK 90", plungers see RACON special accessories". RACON 12 - Short-travel keyswitch SMT gullwing (Z) terminals 5.0 0.15 15.00 +0.5 0.10 14 .80 0.86 3.50 12.00 3.85 4.95 0.10 (A) 4 PCB footprint, view on component side Terminals Operating force Switching travel Solderability / Solder heat resistance Produkt code Packing Order no. SMT Gullwing (Z) SMT Gullwing (Z) SMT Gullwing (Z) 3.60.7 N 0.610.1 mm C1 1.14.001.503/0000 6.81.6 N 0.70.1 mm 9.72.5 N 0.730.1 mm E DIN IEC 600 68-2-58 E DIN IEC 600 68-2-58 E DIN IEC 600 68-2-58 ZD ZE tape and reel a 750 pieces tape and reel a 750 pieces tape and reel a 750 pieces 1.14.001.916/0000 1.14.001.920/0000 RACON Technical data see page 4 - 22 For keycaps refer to chapter RK 90", plungers see RACON special accessories". PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 25 RACON - Short-travel keyswitches RACON 12 V - Short-travel keyswitch with vertical adapter General Data The RACON 12 V version can be used, for example, for PC plug-in boards and for measurement and control engineering applications. The vertical mounting adapter (support element) absorbs the operating force so that the pressure on the soldered terminals is reduced. For this mounting arrangement, the keyswitch is provided with two horizontal terminals on one side. Technical Data Dimensions Length Width Overall height 4 RACON Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force Switching travel Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) 4 - 26 14.5 mm 13.6 mm 4.95 mm soldering THT snap-action contact 1 NO Au no 3.60.7 N 0.610.1 mm 0.02 V 35 V 0.01 mA 100 mA 1W Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (in tube) Environmental restistance Operating life Solderability / solder heat resistance Flammability of materials Packing Produkt code 100 mE 109 E -40 C +80 C -50 C +85 C +85 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 E DIN IEC 600 68-2-20 UL 94 HB in boxes a 100 pieces F1 PCB Keyswitches RACON - Short-travel keyswitches PCB footprint RACON 12V 10.00 0.10 Drilling hole diagramm view on component side 8.20 14.60 6.20 5.00 2.10 6.00 0.10 O1.20 (2x) Circuit Diagram RACON 12V O1.50 (3x) 2.20 0.20 Hatched areas: In this area no components and no conductor tracks 15.00 Switching symbols acc. to IEC 617 form X (twice interrupting) view on component side RACON 12 V - Short-travel keyswitch with vertical adapter Terminals Contact arrangement Produkt code Packing Order no. THT 1 NO F1 in boxes a 100 pieces 1.14.001.505/0000 4 Technical data see page 4 - 26 Plungers for overall height of 6.5 mm may not be used. RACON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 27 RACON - Short-travel keyswitches RACON 12 i - Short-travel keyswitch General Data Application note Low-profile keyboards with RACON 12 i components should be designed with a grid spacing of 15.24 mm. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. If our RK 90 system design is used, we recommend the 9 x 9 mm keycaps. Technical Data General information Colour of lens Recommended key grid Key grid min. 4 RACON Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination see order block 15.24 x 15.24 mm 12.5 x 12.5 mm 11.35 mm 11.35 mm 9.7 mm LED colour LED type soldering THT snap-action contact 1 NO Au fully illuminated 2 LED see order block standard 2 mm Mechanical characteristics Operating force Switching travel 3.30.6 N 0.340.1 mm Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. 4 - 28 0.02 V 35 V 0.01 mA 100 mA 1W Dielectric strength AC min. Insulation resistance 750 V 109 E Electrical characteristics of LED LED rated current max. IF at 25 C LED current reduction beginning with 50 degree C red/green: 30, yellow: 50 mA red: 0.5 mA/degree C, yellow 0.8 mA/ degree C LED wavelength typ. red 639, green 510-535, yellow 590 LED forward voltage UF at 20 mA red: 1.8 V/20 mA, yellow: 1.9 V/20 mA min. 5 V/0.1 mA LED breakdown voltage UR at 25 C Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (intube) Environmental restistance Operating life Solderability / solder heat resistance Flammability of materials Packing -40 C +80 C see order block see order block see order block acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 E DIN IEC 600 68-2-20 UL 94 HB tubes a 45 pieces 100 mE PCB Keyswitches RACON - Short-travel keyswitches RACON 12i typical system assembly RACON 12i smallest grid 12.50 8.90 1.00 4.50 12.50 9.2 0.1 12.00 15.24 7.60 view on component side 8.50 view on component side Explanation Recommended area embossing 0.35 mm at glue spacer thickness of 0.15 mm LED hole patterns Circuit Diagram RACON 12i 7.60 - 1.00 (8x) 4.50 8.90 + - view on component side 8.50 + LED Switching symbols acc. to IEC 60 617 form X (twice interrupting) 4 RACON PCB Keyswitches 4 - 29 RACON - Short-travel keyswitches RACON 12 i - Short-travel keyswitch illuminated area lens red Terminals Contact arrangement Illumination Colour of lens LED colour Order no. THT 1 NO red red 1.14.001.551/0000 THT 1 NO green green 1.14.001.552/0000 THT 1 NO yellow yellow 1.14.001.553/0000 THT 1 NO orange yellow 1.14.001.554/0000 fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED Technical data see page 4 - 28 If keycaps are used we recommend RK 90 keycaps 9 x 9 mm. 4 RACON 4 - 30 Stock items are marked by bold printed order numbers. PCB Keyswitches RACON - Short-travel keyswitches RACON - Special accessories Pict.: 8 mm General Data GH = L" lenth oh plunger + A" height of keyswitch (+ 0.1 mm for SMT versions) Front panel cut-out = size of plunger + 1 mm A GH L Plunger round Pict.: 8 mm 4 RACON Plunger diameter/size RACON version Length of plunger L Order no. 8 mm RACON 8 1,4 mm 5.46.167.301/0209 8 mm RACON 8 1.5 mm 5.46.167.102/0209 8 mm RACON 8 1.6 mm 5.46.167.101/0209 8 mm RACON 8/12 1,9 mm 5.46.167.090/0209 8 mm RACON 8/12 2 mm 5.46.167.106/0209 8 mm RACON 8/12 2.1 mm 5.46.167.107/0209 8 mm RACON 8/12 4,6 mm 5.46.167.091/0209 8 mm RACON 8/12 4.7 mm 5.46.167.311/0209 8 mm RACON 8/12 4.8 mm 5.46.167.094/0209 8 mm RACON 8/12 7,4 mm 5.46.167.092/0209 8 mm RACON 8/12 7.5 mm 5.46.167.099/0209 8 mm RACON 8/12 7.6 mm 5.46.167.096/0209 4 - 32 Stock items are marked by bold printed order numbers. PCB Keyswitches RACON - Short-travel keyswitches Plunger diameter/size RACON version Length of plunger L Order no. 11.5 mm RACON 8 1,4 mm 5.46.167.227/0209 11.5 mm RACON 8 1.5 mm 5.46.167.061/0209 11.5 mm RACON 8 1.6 mm 5.46.167.060/0209 11.5 mm RACON 8/12 2 mm 5.46.167.067/0209 11.5 mm RACON 8/12 2.1 mm 5.46.167.064/0209 11.5 mm RACON 8/12 4,6 mm 5.46.167.043/0209 11.5 mm RACON 8/12 4.7 mm 5.46.167.050/0209 11.5 mm RACON 8/12 4.8 mm 5.46.167.047/0209 11.5 mm RACON 8/12 7.5 mm 5.46.167.059/0209 11.5 mm RACON 8/12 7.6 mm 5.46.167.058/0209 14.5 mm RACON 8 1,4 mm 5.46.168.227/0209 14.5 mm RACON 8 1.5 mm 5.46.168.061/0209 14.5 mm RACON 8 1.6 mm 5.46.168.060/0209 14.5 mm RACON 8/12 2 mm 5.46.168.067/0209 14.5 mm RACON 8/12 2.1 mm 5.46.168.064/0209 14.5 mm RACON 8/12 4,6 mm 5.46.168.043/0209 14.5 mm RACON 8/12 4.7 mm 5.46.168.050/0209 14.5 mm RACON 8/12 4.8 mm 5.46.168.047/0209 14.5 mm RACON 8/12 7,4 mm 5.46.168.044/0209 14.5 mm RACON 8/12 7.5 mm 5.46.168.059/0209 14.5 mm RACON 8/12 7.6 mm 5.46.168.058/0209 19 mm RACON 8 1.5 mm 5.46.169.061/0209 19 mm RACON 8 1.6 mm 5.46.169.060/0209 19 mm RACON 8/12 2 mm 5.46.169.067/0209 19 mm RACON 8/12 2.1 mm 5.46.169.064/0209 19 mm RACON 8/12 4.7 mm 5.46.169.050/0209 19 mm RACON 8/12 4.8 mm 5.46.169.047/0209 19 mm RACON 8/12 7.5 mm 5.46.169.059/0209 4 RACON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 33 RACON - Short-travel keyswitches Plunger diameter/size RACON version Length of plunger L Order no. 19 mm RACON 8/12 7.6 mm 5.46.169.058/0209 Front panel cut-out = Plunger diameter + 1 mm. GH L A Square plunger for membrane data entry system 4 Plunger diameter/size RACON version Length of plunger L Order no. 14 x 14 mm RACON 12 THT 2.1 mm 5.46.001.064/0209 14 x 14 mm RACON 12 THT 4.8 mm 5.46.001.060/0209 14 x 14 mm RACON 12 THT 7.6 mm 5.46.001.063/0209 14 x 14 mm RACON 12 SMT 2 mm 5.46.001.057/0209 14 x 14 mm RACON 12 SMT 4.7 mm 5.46.001.058/0209 14 x 14 mm RACON 12 SMT 7.5 mm 5.46.001.059/0209 Front panel cut-out = 15 x 15 mm. RACON 4 - 34 Stock items are marked by bold printed order numbers. PCB Keyswitches RACON - Short-travel keyswitches NEW RK 90 II, Key cap system for RACON 12 with individual sealing Technical Data General information Thickness of front panel Light conductor Key grid Degree of protection 3.00 mm see order block min. 16.8 x 17.5 mm IP 65 The key cap system RK 90 II has been developed especially fort he short-travel keyswitch RACON 12. The lenses are snapped onto the sealing frame and then set onto the RACON 12 keyswitches. The PCB presses this units against the front panel, so they are sealed. Two versions of the sealing frames are provided with light conductors, either in square ore triangle form. The lenses can be legended directly with laser. For bright letters (see picture) first white lenses are painted in dark, then the letters are cut out of the dark colour with laser. 4 RACON 4 - 36 PCB Keyswitches RACON - Short-travel keyswitches RK 90 II - Sealing frame Sealing frame with square light conductor with snapped-on lens Thickness of front panel Light conductor Order no. without lens Note 3.00 mm square 5.05.004.901/0000 Please order lens separately. 3.00 mm triangular 5.05.004.902/0000 Please order lens separately. 3.00 mm - 5.05.004.903/0000 Please order lens separately. Technical data see page 4 - 36 Lenses: Lens RK 90 II, white: 5.46.654.192/0200 Lens RK 90 II, red: 5.46.654.192/0300 Lens RK 90 II, green: 5.46.654.192/0500 Lens RK 90 II, blue: 5.46.654.192/0600 Lens RK 90 II, yellow: 5.46.654.192/0400 Lens RK 90 II, grey: 5.46.654.192/0700 Lens RK 90 II, iron grey (varnished): 5.46.654.192/6033 Lens RK 90 II, grey (varnished): 5.46.654.192/6032 Legended lenses on request. 4 RACON PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 37 RF - Short-travel keyswitches General Data RF 15 (15 x 15 mm) and RF 19 (19 x 19 mm) with distinct key click, for use under an overlay or with RK 90 keycaps. Can be fully illuminated. Content RF 15 - Short-travel keyswitch RF 15 - Short-travel keyswitch, non-illuminated RF 15 - Short-travel keyswitch, fully illuminated with 2 LED RF 15 - Short-travel keyswitch, 1 LED spot-illumination 4 - 42 4 - 44 4 - 45 4 - 46 RF 15 N - Short-travel keyswitch RF 15 N - Short-travel keyswitch, non-illuminated 4 - 48 4 - 51 RF 15 R - Short-travel keyswitch RF 15 R - Low short-travel keyswitch, non-illuminated RF 15 R - High short-travel keyswitch, non-illuminated RF 15 R - Low short-travel keyswitch, 1 LED spot-illumination RF 15 R - High short-travel keyswitch, 1 LED spot-illumination 4 - 52 4 - 55 4 - 55 4 - 56 4 - 57 RF 15 H - Short-travel keyswitch RF 15 H - Short-travel keyswitch, non-illuminated RF 15 H - Short-travel keyswitch, fully illuminated 4 - 58 4 - 60 4 - 61 RF 15 - Signal indicator RF 15 - Signal indicator, fully illuminated, 1 LED 4 - 62 4 - 64 RF 19 - Short-travel keyswitch RF 19 - Short-travel keyswitch, non-illuminated RF 19 - Short-travel keyswitch, fully illuminated with 2 LED RF 19 - Short-travel keyswitch, 1 LED spot-illumination 4 - 66 4 - 69 4 - 70 4 - 71 RF 19 H - Short-travel keyswitch RF 19 H - Keyswitch, non-illuminated RF 19 H - Short-travel keyswitch, fully illuminated 4 - 72 4 - 74 4 - 75 RF 19 - Signal indicator RF 19 - Signal indicator, 1/2 x 1-module RF 19 - Signal indicator, 1/2 x 2-module RF 19 - Signal indicator, 1 x 1-module RF 19 - Signal indicator, 1 x 2-module 4 - 76 4 - 78 4 - 78 4 - 79 4 - 79 PCB Keyswitches 4 - 39 4 RF RF - Short-travel keyswitches RF 15/19 - Special accessories RF 15 N - Extension plunger, round head RF 15 N - Extension plunger, round head, with recess for LED RF 15 - Keycap, snap-on, for overall height 12.5 mm Spacers, round Spacers, triangular RF 15 N - LED spacer 4 - 80 4 - 80 4 - 81 4 - 81 4 - 82 4 - 83 4 - 84 4 RF 4 - 40 PCB Keyswitches RF - Short-travel keyswitches Specifications LED 3 mm LED (valid for 25 C) Red LED Green LED Yellow LED Max. forward current lF: Current reduction from: T0 = 50 C: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 30 mA approx 0.5 mA/C 635 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C 30 mA approx 0.5 mA/C 565 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C 20 mA approx 0.2 mA/C 586 nm 2 V/10 mA 5 V/100 A min. - 20 C . . . + 80 C Blue LED White LED Green LED superbright 20 mA approx 0.6 mA/C 470 nm 2.7 V/10 mA 5V/100 A min. - 20 C . . . + 80 C 25 mA 3.6 V/20 mA - 20 C . . . + 80 C 30 mA 510-545 nm 3.5 V/20 mA -30 C . . . + 100 C Max. forward current lF: Current reduction from: T0 = 50 C: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 2 mm LED (full illumination of RF 15/19) (valid for 25 C) Red LED Green LED Yellow LED Max. forward current lF: Current reduction from: T0 = 50 C: Light current fV/lF typ: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: 30 mA 0.5 mA/C 637 nm 1.8 V/20 mA 5 V/100 A min. - 55 C . . . + 100 C 30 mA 0.5 mA/C 569 nm 2.1 V/10 mA 5 V/100 A min. - 40 C . . . + 100 C 50 mA 0.8 mA/C 250 mIm/20 mA 590 nm 1.9 V/20 mA 5 V/100 A min. -40 C . . . + 100 C Blue LED Multi-colour LED 30 mA 464-485 nm 3.6 V/20 mA 30 mA approx 0.6 mA/C 635/565 nm 2 V/10 mA - 20 C . . . + 80 C Max. forward current lF: Current reduction from: T0 = 50 C: Light current fV/lF typ: Wavelength typ: Forward voltage UF/lF typ: Reverse voltage UR/lF typ: Ambient temperature, operating: Calculating the series resistor: RV = UB - UF IF PCB Keyswitches - 20 C . . . + 80 C Rated power of series: Example for 5 Volt: PV = IF2 x RV RV = 4 RF 5V - 2,0 V = 150 (= standard value) 0,02 A 4 - 41 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch General Data Low-profile keyboards with RF 15 components should be designed with a 19.05 mm grid. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. Technical Data 4 General information Colour of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block RF Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 42 2.90.6 N 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 15 Circuit Diagram - Keyswitch RF 15 Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 4 Hole Pattern RF 15 Hole Pattern - Front Panel RF View on component side, all hole diameters 1,1 +/- 0,1 mm PCB Keyswitches 4 - 43 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, non-illuminated Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated transparent - - 3.14.100.001/0000 Ag not illuminated transparent - - 3.14.100.006/0000 Technical data see page 4 - 42 For keycaps, refer to chapter accessories and system RK 90. If exchangeable legends are required, or if an overall height of 12.5 mm is required, a keycap can be mounted on the non-illuminated keys. The keycap legend is visible through a window in the overlay. You can change the legend by replacing the keycap. 4 RF 4 - 44 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches Overall height RF 15 - Short-travel keyswitch, fully illuminated with 2 LED Illuminated area 10.8 x 10.8 mm Housing Actuator Lens Pict.: red Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm 3.14.200.011/0000 green green 2 mm 3.14.200.012/0000 yellow yellow 2 mm 3.14.200.013/0000 orange yellow 2 mm 3.14.200.014/0000 blue blue 2 mm 3.14.200.015/0000 red red 2 mm 3.14.200.021/0000 green green 2 mm 3.14.200.022/0000 yellow yellow 2 mm 3.14.200.023/0000 orange yellow 2 mm 3.14.200.024/0000 blue blue 2 mm 3.14.200.025/0000 Au Au Au Au Ag Ag Ag Ag Ag 4 Technical data see page 4 - 42 For keycaps, refer to RK 90 system design. Technical data of LED see seperate page at the beginning of this chapter. RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 45 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, 1 LED spot-illumination Contact materials Illumination Colour of lens LED colour LED type Order no. Au spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED opaque white blue 3 mm 3.14.100.030/0000 opaque white red 3 mm 3.14.100.031/0000 opaque white green 3 mm 3.14.100.032/0000 opaque white yellow 3 mm 3.14.100.033/0000 opaque white blue 3 mm 3.14.100.040/0000 opaque white red 3 mm 3.14.100.041/0000 opaque white green 3 mm 3.14.100.042/0000 opaque white yellow 3 mm 3.14.100.043/0000 Au Au Au Ag Ag Ag Ag Technical data see page 4 - 42 Double-spot LED illumination available on request 4 Technical data of LED see seperate page at the beginning of this chapter. RF 4 - 46 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 15 N - Short-travel keyswitch General Data The RF 15N keyswitch provides a minimum overall height of 6.2 mm. The overall height can be varied by extension plungers which are inserted into the cross-like notches on the actuator tops. LEDs can only be arranged separately next to the keyswitches up to an overall height of 10 mm (i.e. without plunger or with small plunger). Keyswitches with overall heights of 12 mm or more can be provided with a maximum of 2 LEDs which are inserted into the recesses of the keyswitch housing. LEDs of keyswitches with overall heights of 12.5 mm or more should be placed onto LED spacers in order to obtain satisfactory illumination. Technical Data 4 RF General information Colour of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 6.2 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 48 soldering in PCB THT snap-action contact 1 NO see order block external 3 mm LED possible if height more than 12 mm 2.90.6 N 0.5+0.2 mm 100 with throughplated PCB N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature max. (in tube) Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C +50 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 15 N Circuit Diagram - Keyswitch RF 15 N Operation characteristic limits RF Keyswitch, non illuminated Keyswitch, spot-illuminated Dimensional Drawings RF 15 N 4 RF PCB Keyswitches 4 - 49 RF - Short-travel keyswitches Hole Patterns - Front Panel RF 15 N RF 15 N without plunger RF 15 N with plunger o 10 mm, non-illuminated RF 15 N with plunger o 10 mm, illuminated RF 15 N with plunger o 15 mm, illuminated 4 Hole Pattern RF 15 N RF View on component side All hole diameters 1.1 +/- 0.1 mm PCB layout keyswitch 1/400" grid 4 - 50 PCB Keyswitches RF - Short-travel keyswitches Typical accessories RF 15 N - Short-travel keyswitch Description Photo RF 15 N - LED spacer O 5 mm, spacing length 2.2 mm, light grey, for use with overall height of 12.5 mm Order no. Additional accessories see page 4 - 84 5.30.109.010/0756 RF 15 N - Extension plunger, O 10 mm, overall height 22.5 mm 5.46.011.028/0710 4 - 80 RF 15 N - Extension plunger, O 15 mm, overall height 22.5 mm 5.46.017.028/0710 4 - 81 RF 15 N - Short-travel keyswitch, non-illuminated Contact materials Illumination Au external 3 mm LED possible if 19.05 mm height more than 12 mm external 3 mm LED possible if 19.05 mm height more than 12 mm Ag Recommended key grid Overall height Order no. 6.2 mm 3.14.100.601/0000 6.2 mm 3.14.100.606/0000 Technical data see page 4 - 48 4 For keycaps, refer to RK 90 system design. Double-spot LED illumination available on request. RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 51 RF - Short-travel keyswitches RF 15 R - Short-travel keyswitch Pict.: with 2 mm LED, red with 3 mm LED, green General Data The round actuator of the RF 15 R keyswitch requires round front panel cut-outs. These make it possible to use a narrow keyboard grid of only 15.24 mm with sufficiently large frame webs between the individual keys. We recommend area embossing over the actuators for the overlay. Technical Data 4 General information Recommended key grid 15.24 mm Dimensions Length Width Overall height 15 mm 15 mm see order block Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type RF Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 52 soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block 2.90.6 N 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 15 R Circuit Diagram - Keyswitch RF 15 R Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 R 4 Hole Pattern RF 15 R RF View on component side All hole diameters 1.1 +/- 0.1 mm PCB layout keyswitch 1/400" grid PCB Keyswitches 4 - 53 RF - Short-travel keyswitches Hole Pattern - Front Panel RF 15 R RF 15 R, non-illuminated RF 15 R, illuminated 4 RF 4 - 54 PCB Keyswitches RF - Short-travel keyswitches Overall height RF 15 R - Low short-travel keyswitch, non-illuminated Contact materials Overall height Illumination LED type LED colour Order no. Au 9.7 mm not illuminated - - 3.14.100.501/0000 Ag 9.7 mm not illuminated - - 3.14.100.506/0000 Technical data see page 4 - 52 RF 15 R - High short-travel keyswitch, non-illuminated 4 Contact materials Overall height Illumination LED type LED colour Order no. Au 12.5 mm not illuminated - - 3.14.100.801/0000 Ag 12.5 mm not illuminated - - 3.14.100.806/0000 Technical data see page 4 - 52 RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 55 RF - Short-travel keyswitches RF 15 R - Low short-travel keyswitch, 1 LED spot-illumination Pict.: with 2 mm LED, red Contact materials Overall height Illumination LED type LED colour Order no. Au 9.7 mm 2 mm red 3.14.100.531/0000 Au 9.7 mm 2 mm green 3.14.100.532/0000 Au 9.7 mm 2 mm yellow 3.14.100.533/0000 Ag 9.7 mm 2 mm red 3.14.100.541/0000 Ag 9.7 mm 2 mm green 3.14.100.542/0000 Ag 9.7 mm spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED 2 mm yellow 3.14.100.543/0000 Technical data see page 4 - 52 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of this chapter. 4 RF 4 - 56 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 15 R - High short-travel keyswitch, 1 LED spot-illumination Pict.: with 3 mm LED, green Contact materials Overall height Illumination LED type LED colour Order no. Au 12.5 mm 3 mm blue 3.14.100.830/0000 Au 12.5 mm 3 mm red 3.14.100.831/0000 Au 12.5 mm 3 mm green 3.14.100.832/0000 Au 12.5 mm spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED 3 mm yellow 3.14.100.833/0000 Technical data see page 4 - 52 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of the chapter. 4 RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 57 RF - Short-travel keyswitches RF 15 H - Short-travel keyswitch General Data Application notes: The RF 15 H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 20 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data 4 RF General information Colour of lens Recommended key grid see order block 20 mm Dimensions Length Width Overall height 15 mm 15 mm 12.5 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 58 2.90.6 N 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 15 H Circuit Diagram - Keyswitch RF 15 H Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Dimensional Drawing 4 Hole Pattern Hole Pattern - Front Panel RF View on component side. All hole diameters 1,1 +/- 0,1 mm. PCB layout keyswitch 1/400 grid. PCB Keyswitches 4 - 59 RF - Short-travel keyswitches Typical accessories RF 15 H - Short-travel keyswitch Description Photo Order no. Additional accessories see page 5 - 25 5.30.120.009/0100 O-ring, black, for blocking the operating stroke RF 15 H - Short-travel keyswitch, non-illuminated housing actuator overall height lens illuminated area Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated white - - 3.14.100.702/0000 Ag not illuminated white - - 3.14.100.707/0000 Technical data see page 4 - 58 4 RF 4 - 60 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 15 H - Short-travel keyswitch, fully illuminated housing actuator overall height lens illuminated area Pict.: yellow Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED red red 2 mm 3.14.200.731/0000 green green 2 mm 3.14.200.732/0000 green green super bright 3 mm 3.14.200.736/0000 yellow yellow 2 mm 3.14.200.733/0000 white white 3 mm 3.14.200.735/0000 orange yellow 2 mm 3.14.200.738/0000 blue blue 3 mm 3.14.200.739/0000 yellow multi colour 3 mm 3.14.101.903/0000 red red 2 mm 3.14.200.741/0000 green green 2 mm 3.14.200.742/0000 green green super bright 3 mm 3.14.200.746/0000 yellow yellow 2 mm 3.14.200.743/0000 white white 3 mm 3.14.200.745/0000 orange yellow 2 mm 3.14.200.748/0000 blue blue 3 mm 3.14.200.749/0000 white multi colour 3 mm 3.14.100.744/0000 Au Au Au Au Au Au Au/Ag Ag Ag Ag Ag Ag Ag Ag Ag RF Technical data see page 4 - 58 When using the keyswitches with multicolour LEDs the illumination colour can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colours red, green, yellow as well as all secondary colours from these are possible. Technical data of LED see separate page at the beginning of this chapter. PCB Keyswitches 4 Stock items are marked by bold printed order numbers. 4 - 61 RF - Short-travel keyswitches RF 15 - Signal indicator Technical Data General information Colour of lens Recommended key grid see order block 19.05 mm Dimensions Length Width Overall height 15 mm 15 mm 9.7 mm Mechanical design Mounting Illumination 4 LED colour LED type Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. THT soldering in PCB fully illuminated 1 LED see order block 2 mm RF 4 - 62 PCB Keyswitches RF - Short-travel keyswitches Dimensional Drawing Signal Indicator RF 15 Hole Pattern Hole Pattern - Front Panel 4 View on component side, all hole diameters 1,1 +/- 0,1 mm RF PCB Keyswitches 4 - 63 RF - Short-travel keyswitches RF 15 - Signal indicator, fully illuminated, 1 LED Illuminated area 10.8 x 10.8 mm Housing Lens Pict.: green Overall height Illumination Colour of lens LED colour LED type Order no. 9.7 mm fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED red red 2 mm 3.14.200.051/0000 green green 2 mm 3.14.200.052/0000 yellow yellow 2 mm 3.14.200.053/0000 orange yellow 2 mm 3.14.200.054/0000 blue blue 2 mm 3.14.200.055/0000 9.7 mm 9.7 mm 9.7 mm 9.7 mm Technical data see page 4 - 62 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. 4 RF 4 - 64 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 19 - Short-travel keyswitch General Data Application notes: RF 19 keys offer a large actuation area. When designing low-profile keyboards with a grid of >= 23 mm, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlay. Technical Data 4 RF General information Colour of lens Recommended key grid see order block 23 mm Dimensions Length Width Overall height 19.05 mm 19.05 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 66 2.90.6 N 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 19 Circuit Diagram - Keyswitch RF 19 Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Keyswitch, spot-illuminated Dimensional Drawing 4 RF PCB Keyswitches 4 - 67 RF - Short-travel keyswitches Hole Patterns RF 19 * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Hole Patterns - Front Panel RF 19 4 RF 4 - 68 PCB Keyswitches RF - Short-travel keyswitches Overall hight RF 19 - Short-travel keyswitch, non-illuminated Housing Actuator Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated transparent - - 3.14.001.001/0000 Ag not illuminated transparent - - 3.14.001.006/0000 Technical data see page 4 - 66 4 RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 69 RF - Short-travel keyswitches RF 19 - Short-travel keyswitch, fully illuminated with 2 LED Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm 3.14.002.011/0000 green green 2 mm 3.14.002.012/0000 opaque white green 2 mm 3.14.002.901/0000 yellow yellow 2 mm 3.14.002.013/0000 orange yellow 2 mm 3.14.002.014/0000 blue blue 2 mm 3.14.002.015/0000 red red 2 mm 3.14.002.021/0000 green green 2 mm 3.14.002.022/0000 yellow yellow 2 mm 3.14.002.023/0000 orange yellow 2 mm 3.14.002.024/0000 blue blue 2 mm 3.14.002.025/0000 opaque white green 2 mm 3.14.002.944/0000 white green 2 mm 3.14.002.026/0000 white yellow 2 mm 3.14.002.027/0000 Au Au Au Au Au Ag Ag Ag Ag 4 Ag Ag Ag Ag Technical data see page 4 - 66 Technical data of LED see separate page at the beginning of this chapter. RF 4 - 70 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 19 - Short-travel keyswitch, 1 LED spot-illumination Pict.: red Contact materials Illumination Colour of lens LED colour LED type Order no. Au spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED opaque white blue 3 mm 3.14.001.030/0000 opaque white red 3 mm 3.14.001.031/0000 opaque white green 3 mm 3.14.001.032/0000 opaque white yellow 3 mm 3.14.001.033/0000 opaque white blue 3 mm 3.14.001.040/0000 opaque white red 3 mm 3.14.001.041/0000 opaque white green 3 mm 3.14.001.042/0000 opaque white yellow 3 mm 3.14.001.043/0000 Au Au Au Ag Ag Ag Ag Technical data see page 4 - 66 Versions with 2 LEDs available on request. 4 Technical data of LED see separate page at the beginning of this chapter. RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 71 RF - Short-travel keyswitches RF 19 H - Short-travel keyswitch General Data Application notes: The RF 19H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 24 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data 4 RF General information Colour of lens Recommended key grid see order block 24 mm Dimensions Length Width Overall height 19.05 mm 19.05 mm 12.5 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type soldering in PCB THT snap-action contact 1 NO see order block see order block see order block see order block Mechanical characteristics Operating force max. Switching travel Robustness min. 4 - 72 2.90.6 N 0.5+0.2 mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life min. (operations) Solderability / solder heat resistance Wave soldering Manual soldering Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 mA, Ag: 0.1 mA Au: 100 mA, Ag: 250 mA Au: 2 W, Ag: 12.5 W 100 mE 109 E -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 1,000,000 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. PCB Keyswitches RF - Short-travel keyswitches Force/Travel Diagram - Keyswitch RF 19 H Circuit Diagram - Keyswitch RF 19 H Operation characteristic limits RF Keyswitch, non illuminated Keyswitch, fully illuminated Dimensional Drawing 4 RF PCB Keyswitches 4 - 73 RF - Short-travel keyswitches Hole Pattern RF 19 H Hole Pattern - Front Panel RF 19 H Keyswitch not illuminated * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Typical accessories RF 19 H - Short-travel keyswitch Photo Description 4 Order no. Additional accessories see page 5 - 25 5.30.125.007/0100 O-ring, black, 16.0 x 1, for blocking RF 19H keys RF 19 H - Keyswitch, non-illuminated RF Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated white - - 3.14.001.501/0000 Ag not illuminated white - - 3.14.001.506/0000 Technical data see page 4 - 72 4 - 74 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 19 H - Short-travel keyswitch, fully illuminated Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 1 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm 3.14.002.613/0000 green green 2 mm 3.14.002.632/0000 green green super bright 3 mm 3.14.002.633/0000 yellow yellow 2 mm 3.14.002.653/0000 white white 3 mm 3.14.002.684/0000 orange yellow 2 mm 3.14.002.673/0000 white multi colour 3 mm 3.14.001.672/0000 blue blue 3 mm 3.14.002.683/0000 red red 2 mm 3.14.002.623/0000 green green 2 mm 3.14.002.642/0000 green green super bright 3 mm 3.14.002.643/0000 blue blue 3 mm 3.14.002.688/0000 yellow yellow 2 mm 3.14.002.663/0000 white white 3 mm 3.14.002.689/0000 orange yellow 2 mm 3.14.002.678/0000 white multi colour 3 mm 3.14.001.682/0000 Au Au Au Au Au Au Au Ag Ag Ag Ag Ag Ag Ag Ag RF Technical data see page 4 - 72 When using the keyswitches with multicolour LEDs the illumination colour can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colours red, green, yellow as well as all secondary colours from these are possible. Technical data of LED see separate page at the beginning of this chapter. PCB Keyswitches 4 Stock items are marked by bold printed order numbers. 4 - 75 RF - Short-travel keyswitches RF 19 - Signal indicator Pict.: 0.5 x 1-module 0,5 x 2-module 1 x 1-module 1 x 2-module Technical Data 4 General information Colour of lens Recommended key grid see order block 23/x mm Dimensions Length Width Overall height see order block see order block 9.15 mm Mechanical design Mounting Illumination LED colour LED type THT soldering in PCB see order block see order block see order block Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Solderability / solder heat resistance Wave soldering Manual soldering -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 according to E DIN IEC 600 28-2-20 260 C max. 350 C / 5 sec. max. RF 4 - 76 PCB Keyswitches RF - Short-travel keyswitches Dimensional Drawing Signal Indicator RF 19 Hole Pattern RF 19 4 RF * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Front panel cut-out = outer keyswitch size + 1 mm PCB Keyswitches 4 - 77 RF - Short-travel keyswitches RF 19 - Signal indicator, 1/2 x 1-module Housing Lens Illuminated area 16.4 x 7.8 mm Pict.: 0.5 x 1-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED red red 2 mm 3.14.002.061/0000 green green 2 mm 3.14.002.062/0000 yellow yellow 2 mm 3.14.002.063/0000 orange yellow 2 mm 3.14.002.064/0000 Technical data see page 4 - 76 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. RF 19 - Signal indicator, 1/2 x 2-module 4 Pict.: 0,5 x 2-module RF Illumination Colour of lens LED colour LED type Order no. fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED red red 2 mm 3.14.002.908/0000 green green 2 mm 3.14.002.909/0000 yellow yellow 2 mm 3.14.002.910/0000 orange yellow 2 mm 3.14.002.911/0000 Technical data see page 4 - 76 Technical data of LED see separate page at the beginning of chapter 4 PCB Keyswitches. 4 - 78 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 19 - Signal indicator, 1 x 1-module Pict.: 1 x 1-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm 3.14.002.051/0000 green green 2 mm 3.14.002.052/0000 yellow yellow 2 mm 3.14.002.053/0000 orange yellow 2 mm 3.14.002.054/0000 blue blue 2 mm 3.14.001.659/0000 Technical data see page 4 - 76 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches" Suitable for RK 90 system design, illuminated for 2-module keycap. RF 19 - Signal indicator, 1 x 2-module 4 Pict.: 1 x 2-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED red red 2 mm 3.14.002.071/0000 green green 2 mm 3.14.002.072/0000 yellow yellow 2 mm 3.14.002.073/0000 orange yellow 2 mm 3.14.002.074/0000 RF Technical data see page 4 - 76 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches" PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 79 RF - Short-travel keyswitches RF 15/19 - Special accessories Pict.: opaque light grey round and triangular versions Technical Data Dimensions Length Width see order block see order block Overall height Diameter Colour see order block see order block see order block RF 15 N - Extension plunger, round head Pict.: opaque light grey 4 RF Length Width Overall height Diameter Colour Order no. - - 9 mm 10 mm - 5.46.011.036/0710 - - 9.7 mm 10 mm - 5.46.011.030/0710 - - 12.5 mm 10 mm - 5.46.011.037/0710 - - 13 mm 10 mm - 5.46.011.038/0710 - - 22.5 mm 10 mm - 5.46.011.028/0710 Length of plunger = Overall height - 4.25 mm. 4 - 80 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches RF 15 N - Extension plunger, round head, with recess for LED Length Width Overall height Diameter Colour Order no. - - 9 mm 15 mm - 5.46.017.036/0710 - - 9.7 mm 15 mm - 5.46.017.030/0710 - - 12.5 mm 15 mm - 5.46.017.037/0710 - - 22.5 mm 15 mm - 5.46.017.028/0710 - - 13 mm 15 mm - 5.46.017.038/0710 Technical data see page 4 - 80 Length of plunger = Overall height - 4.25 mm. RF 15 - Keycap, snap-on, for overall height 12.5 mm 4 Length Width Overall height Diameter Colour Order no. 14.2 mm 14.2 mm 12.5 mm - beige 5.46.654.059/0227 Technical data see page 4 - 80 RF PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 81 RF - Short-travel keyswitches Spacers, round Overlay Front panel Spacer PCB 4 RF Length Width Overall height Diameter Colour Order no. 3.50 mm - - - blue transparent 5.30.759.023/0000 4 mm - - - green 5.30.759.025/0000 4.25 mm - - - blue 5.30.759.026/0000 4.50 mm - - - red 5.30.759.027/0000 4.75 mm - - - blue transparent 5.30.759.028/0000 5 mm - - - black 5.30.759.029/0000 5.25 mm - - - 5.30.759.030/0000 5.50 mm - - - yellow orange transparent yellow 5.75 mm - - - green 5.30.759.032/0000 6 mm - - - blue 5.30.759.033/0000 6.2 mm - - - blue 5.30.759.251/0000 6.25 mm - - - red 5.30.759.034/0000 6.50 mm - - - blue transparent 5.30.759.035/0000 6.75 mm - - - black 5.30.759.036/0000 7 mm - - - 5.30.759.037/0000 7.25 mm - - - yellow orange transparent yellow 7.50 mm - - - green 5.30.759.039/0000 7.75 mm - - - blue 5.30.759.040/0000 8 mm - - - red 5.30.759.041/0000 8.25 mm - - - blue transparent 5.30.759.042/0000 10.00 mm - - - black 5.30.759.043/0104 5.30.759.031/0000 5.30.759.038/0000 Technical data see page 4 - 80 Required spacer length = Overall height of key - front panel thickness - 0.5 mm (area embossing). 4 - 82 Stock items are marked by bold printed order numbers. PCB Keyswitches RF - Short-travel keyswitches Spacers, triangular Overlay Front panel Spacer PCB Countersink from height > 4 mm Length Width Overall height Diameter Colour Order no. 2.50 mm - - - blue 5.30.759.094/0000 2.75 mm - - - red 5.30.759.095/0000 3 mm - - - blue transparent 5.30.759.096/0000 3.25 mm - - - black 5.30.759.097/0000 3.50 mm - - - 5.30.759.098/0000 3.75 mm - - - yellow orange transparent yellow 4 mm - - - green 5.30.759.100/0000 4.25 mm - - - blue 5.30.759.101/0000 4.50 mm - - - red 5.30.759.102/0000 4.75 mm - - - blue transparent 5.30.759.103/0000 5 mm - - - black 5.30.759.104/0000 5.25 mm - - - 5.30.759.105/0000 5.50 mm - - - yellow orange transparent yellow 5.75 mm - - - green 5.30.759.107/0000 6 mm - - - blue 5.30.759.108/0000 6.2 mm - - - blue 5.30.759.253/0000 6.25 mm - - - red 5.30.759.109/0000 6.50 mm - - - blue transparent 5.30.759.110/0000 6.75 mm - - - black 5.30.759.111/0000 7 mm - - - 5.30.759.112/0000 7.25 mm - - - yellow orange transparent yellow 7.50 mm - - - green 5.30.759.114/0000 7.75 mm - - - blue 5.30.759.115/0000 PCB Keyswitches Stock items are marked by bold printed order numbers. 5.30.759.099/0000 4 5.30.759.106/0000 5.30.759.113/0000 4 - 83 RF RF - Short-travel keyswitches Length Width Overall height Diameter Colour Order no. 8 mm - - - red 5.30.759.116/0000 8.25 mm - - - blue transparent 5.30.759.117/0000 9 mm - - - blue 5.30.759.254/0000 10.00 mm - - - black 5.30.759.124/0000 10.25 mm - - - yellow orange transparent 5.30.759.125/0000 Technical data see page 4 - 80 Required spacer length = Overall height of key - front panel thickness - 0.5 mm (area embossing). RF 15 N - LED spacer Pict.: opaque light grey 4 Length Width Overall height Diameter Colour Order no. 2.2 mm - 12.5 mm 5 mm light grey 5.30.109.010/0756 12 mm - 22.5 mm 5 mm black 5.30.109.019/0105 Technical data see page 4 - 80 RF 4 - 84 Stock items are marked by bold printed order numbers. PCB Keyswitches KN 19 - Short-travel main switch General Data Short-travel main switch for use in membrane keyboards under the overlay or with RK 90 keycaps, 250V, 4A max. A cut-out in the overlay is not required! Content KN 19 - Short-travel main switch KN 19 - Short-travel main switch 4 - 86 4 - 88 4 KN 19 PCB Keyswitches 4 - 85 KN 19 - Short-travel main switch KN 19 - Short-travel main switch Pict.: 1O + 1S 2O / 2S General Data The KN 19 makes it possible to implement a power switch directly in a low-profile data entry system. This eliminates the need for extra switches on the device and additional openings in the overlay. In this way, you can achieve an optimum of safety and a consistent design. The contact opening widths comply with the VDE standards. The KN 19 can also be employed underneath RK 90 keycaps. Other actuation functions (momentary, latching/momentary) available on request. Technical Data 4 General information Recommended key grid 19.05 x 38.1 mm Dimensions Length Width Overall height 37.8 mm 18.8 mm 9.7 mm Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination KN 19 Degree of protection Hot wire ignition acc. to IEC 60695-2-1 on PCB THT solder terminals snap-action bridge contact see order block Ag 1 LED (max. 3 mm) possible IP40 850 C Electrical characteristics Rated voltage AC min. Rated voltage DC min. Rated voltage AC max. Rated voltage DC max. Ohmic load AC Ohmic load DC min. Ohmic load DC max. Contact resistance when new max. Capacity input current AC max. Rated motor current AC Rated filament lamp current AC Bouncing time max. Other specifications Ambient temp. operating min. Ambient temp. operating max. Environmental restistance Operating life AC Mechanical characteristics Operating force max. Operating travel Robustness max. 4 - 86 93 N 0.550.15 mm 100 N Operating life DC Soldering time max. Soldering temperature max. Flame class acc. to UL 94 12 V 12 V 250 V 50 V 6A 0.1 A 10 A 50 mE 100 A 4A 2.4 A 10 ms -25 C +70 C acc. to IEC 60068-2 -14, -30, -33 and -78 AC 250 V: 200.000/ 2A; 100.000 /6A 50,000(10 A / 50 V=) 3s 350 C UL 94 VO PCB Keyswitches KN 19 - Short-travel main switch Circuit Diagram 1O+1S 2 O/2 S Dimensional Drawing Hole Pattern Definition "ON" "OFF" only valid for 2-pole version. Locating hole only version 2 NO/2 NC View on component side. 4 Approvals IEC 61058 UL 508,C22.2 No. 14-M91 KN 19 PCB Keyswitches 4 - 87 KN 19 - Short-travel main switch Approvals IEC 61058 UL 508,C22.2 No. 14-M91 Typical accessories KN 19 - Short-travel main switch Description Photo KN19 - Absorption rubber Order no. Additional accessories see page 5.30.729.009/0000 KN 19 - Short-travel main switch Pict.: 1 NC + 1 NO 4 Contact arrangement Rated voltage AC max. Order no. 1 NC + 1 NO 250 V 1.12.000.001/0000 2 NC / 2 NO 250 V 1.12.000.501/0000 Technical data see page 4 - 86 Accessoires: KN19 - Absorption rubber: 5.30.729.009/0000 For keycaps, refer to RK 90 system design. Positive opening NC contacts to IEC 60 947-5-1. 1-LED spot-illumination (max. 3 mm) possible. KN 19 4 - 88 Stock items are marked by bold printed order numbers. PCB Keyswitches RK 90 - Keycaps General Data Keycaps for RACON, RF 15 / RF 19 and KN 19 short-travel keyswitches s 9OU CAN INSERT A LEGEND INSERT BETWEENLENS AND PRESSURE PAOL OF THE TRANSPARENT KEYCAPS Content RK 90 - Keycaps, plastic, 9 x 9 mm 2+ +EYCAP BODY PLASTIC FOR LENSES X MM 4 - 92 RK 90 - Keycaps, plastic, 14 mm 2+ +EYCAP BODY PLASTIC FOR LENSES MM MODULE 2+ +EYCAP BODY PLASTIC FOR LENSES MODULE 2+ +EYCAP BODY PLASTIC FOR LENSES MM MODULE 2+ +EYCAP BODY PLASTIC FOR LENSES MODULE 4 - 94 RK 90 - Keycaps, aluminum, 14 x 14 mm 2+ +EYCAPS ALUMINUM MM MODULE 2+ +EYCAPS ALUMINUM MM MODULE 2+ +EYCAPS ALUMINUM MM MODULE 4 - 98 RK 90 - Special accessories 2+ &IN TO AVOID INADVERTENT OPERATION 2+ 3PACER - 2+ 3ILICONE FOIL X X MM 4 4 - 100 RK 90 PCB Keyswitches 4 - 89 RK 90 - Keycaps Keycap system RK 90 Example with RF 15 keyswitches. Instead of RF 15 following keyswitches can be used: - MICON 5 - RACON 8/12 - RF 15 keyswitches and signal indicators - RF 19 keyswitches and signal indicators - Short-travel main switch KN 19 The RK 90 system was granted the prize of the Design Forum of the Hannover Fair. Degree of protection: IP65 according to DIN in front of the panel, with silicone sealing. Installation methods 4 Mounting from front Sealing foil between RK 90 keyboard and customer's front panel. Mounting from rear Sealing foil is screwed to RK 90 panel with fixing rails; sealing between keyboard and customer's front panel has to be provided. Legending L Laser printing: This labelling method is possible for opaque keycaps. The symbols are engraved in the keycaps with laser. L When using transparent lenses, the pressure pad can be legended by printing. As the legending is protected by the lens, it is frictionproof. L RK 90 4 - 90 Engraving: With this method the keycaps are engraved with the required symbol and then inlaid with ink. PCB Keyswitches RK 90 - Keycaps Recommendations L Front panel thickness: - Aluminum: 2 mm (1.5 mm min, 3 mm max.) (Fixing with M 3 pressed-in studs) - Steel: 2 mm (3 mm max.): V2A: 1.25 mm (Fixing with M 3 welded-on studs) The keytop surface is flush with the keyboard at a panel thickness of 3.5 mm. L Silicone sealing: Material: Silicone transparent Type: A-SY 40-79 Hardness: 30 shore +/- 5 Thickness: 0.45 +/- 0.05 mm L Installation: Ensure that the keyboard slopes slightly so that any liquid can drain away between front panel and silicone sealing; if necessary, provide additional drain holes in the front panel. Cleaning liquids For the cleaning of the plastic keycaps please do not use cleaning liquids based on alcohol or acid. 4 RK 90 PCB Keyswitches 4 - 91 RK 90 - Keycaps RK 90 - Keycaps, plastic, 9 x 9 mm Steel stud welded-on with steel version pressed-in with aluminum version Keycap Front panel Sealing Housing 0ICT WITH COLOURLESS LENS General Data 9OU CAN DESIGN ESPECIALLY SMALL INPUT FIELDS WITH THE SMALL KEYCAP X MM &OR EXAMPLE CONTROLS FOR MEASUREMENT AND LABORATORY EQUIPMENT WHICH DO NOT OFFER MUCH SPACE FOR INPUT FIELDS BECAUSE OF THEIR SMALL SIZE 2+ KEYCAPS X MM AND 2!#/. SHORT TRAVEL KEYSWITCHES CAN BE USED TO IMPLEMENT KEY GRIDS OF ONLY MM4HE KEYCAPS CAN BE LEGENDED BY LASER PRINTING ENGRAVING OR STANDARD PRINTING 4HIS KEYCAP IS OUR FIRST CHOICE IN A COMBINATION WITH THE ILLUMINATED 2!#/. I SHORT TRAVEL KEYSWITCH Please note: &OR THE CLEANING OF THE PLASTIC KEYCAPS PLEASE DO NOT USE CLEANING LIQUIDS BASED ON ALCOHOL OR ACID Technical Data 4 General information #OLOUR OF LENS 3IZE $EGREE OF PROTECTION WITH SILICON SEAL )LLUMINABILITY SEE ORDER BLOCK MODULE )0 SEE ORDER BLOCK Dimensions $IMENSION KEYCAP IN FRONT OF FRONT PANEL $IMENSION KEYCAP BEHIND FRONT PANEL $IMENSION C HOLE PATTERNS FINAL SIZE $IMENSION HOLE PATTERNS PUNCHED SIZE X MM X MM X MM X MM 0LEASE ORDER LENS SEPARATELY RK 90 PCB Keyswitches RK 90 - Keycaps RK 90 - Keycap body plastic, for lenses 9 x 9 mm Final size Punched size 0ICT WITH LENS LIGHT GREY Size Illuminability Dimension keycap behind front panel Dimension keycap in front of front panel MODULE yes X MM X MM Dimension (c) hole patterns final size Order no. without lens Note X MM 0LEASE ORDER LENSES SEPARATELY 4ECHNICAL DATA SEE PAGE Lenses: 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS 2+ ,ENS X MM X MM X MM X MM X MM X MM X MM X MM X MM OPAQUE RED OPAQUE YELLOW OPAQUE GREEN OPAQUE BLUE OPAQUE LIGHT GREY TRANSPARENT COLOURLESS TRANSPARENT RED TRANSPARENT YELLOW TRANSPARENT GREEN 4 RK 90 PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. RK 90 - Keycaps RK 90 - Keycaps, plastic, 14 mm 0ICT WITH LENS OPAQUE GREEN General Data +EYCAP SYSTEM FOR MM GRID4HE KEYCAPS CAN BE LEGENDED BY LASER PRINTING ENGRAVING OR STANDARD PRINTING +EYCAPS SETS WITH LEGENDS AND OTHER KEYCAP SHAPES COLOURS AVAILABLE ON REQUEST Please note: &OR THE CLEANING OF THE PLASTIC KEYCAPS PLEASE DO NOT USE CLEANING LIQUIDS BASED ON ALCOHOL OR ACID Technical Data 4 General information #OLOUR OF LENS 3IZE $EGREE OF PROTECTION WITH SILICON SEAL )LLUMINABILITY SEE ORDER BLOCK SEE ORDER BLOCK )0 yes Dimensions $IMENSION B IN FRONT OF FRONT PANEL $IMENSION A BEHIND FRONT PANEL $IMENSION C HOLE PATTERNS FINAL SIZE $IMENSION HOLE PATTERNS PUNCHED SIZE SEE ORDER BLOCK SEE ORDER BLOCK SEE ORDER BLOCK SEE ORDER BLOCK RK 90 4 - 94 PCB Keyswitches RK 90 - Keycaps Final size Punched size RK 90 - Keycap body plastic, for lenses 14 mm, 1-module Pict.: with lens, opaque green Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note 1-module yes 17.20 x 17.20 mm 13.85 x 13.85 mm 14.00 x 14.00 mm 5.55.103.030/1013 Please order lenses separately. Technical data see page 4 - 94 Lenses: RK 90 - Lens, 14 mm, 1-module, opaque red: 5.46.681.001/0309 RK 90 - Lens, 14 mm, 1-module, opaque yellow: 5.46.681.001/0409 RK 90 - Lens, 14 mm, 1-module, opaque green: 5.46.681.001/0514 RK 90 - Lens, 14 mm, 1-module, opaque blue: 5.46.681.001/0611 RK 90 - Lens, 14 mm, 1-module, opaque light grey: 5.46.681.001/0700 RK 90 - Lens, 14 mm, 1-module, transparent colourless: 5.46.681.021/1002 RK 90 - Lens, 14 mm, 1-module, transparent red: 5.46.681.021/1307 RK 90 - Lens, 14 mm, 1-module, transparent yellow: 5.46.681.021/1403 RK 90 - Lens, 14 mm, 1-module, transparent green: 5.46.681.021/1510 Final size Punched size RK 90 - Keycap body plastic, for lenses 11/4-module 4 Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note 1 11/4-module yes 17.20 x 20.7 mm 13.85 x 17.35 mm 14,00 x 17,5 mm 5.55.103.031/1013 Please order lenses separately. Technical data see page 4 - 94 Lenses: RK 90 - Lens, 14 mm, 1.25-module, opaque red: 5.46.681.002/0309 RK 90 - Lens, 14 mm, 1.25-module, opaque light grey: 5.46.681.002/0700 RK 90 - Lens, 14 mm, 1.25-module, transparent colourless: 5.46.681.022/1002 RK 90 - Lens, 14 mm, 1.25-module, transparent red: 5.46.681.022/1307 RK 90 - Lens, 14 mm, 1.25-module, transparent yellow: 5.46.681.022/1403 RK 90 - Lens, 14 mm, 1.25-module, transparent green: 5.46.681.022/1510 RK 90 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 95 RK 90 - Keycaps Final size Punched size RK 90 - Keycap body plastic, for lenses 14 mm, 11/2-module Pict.: with lens, opaque light grey Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note 11/2-module yes 17.20 x 24.20 mm 13.85 x 20.85 mm 14.00 x 21.00 mm 5.55.103.032/1013 Please order lenses separately. Technical data see page 4 - 94 Lenses: RK 90 - Lens, 14 mm, 1.5-module, opaque red: 5.46.681.003/0309 RK 90 - Lens, 14 mm, 1.5-module, opaque yellow: 5.46.681.003/0409 RK 90 - Lens, 14 mm, 1.5-module, opaque green: 5.46.681.003/0514 RK 90 - Lens, 14 mm, 1.5-module, opaque blue: 5.46.681.003/0611 RK 90 - Lens, 14 mm, 1.5-module, opaque light grey: 5.46.681.003/0700 RK 90 - Lens, 14 mm, 1.5-module, transparent colourless: 5.46.681.023/1002 RK 90 - Lens, 14 mm, 1.5-module, transparent red: 5.46.681.023/1307 RK 90 - Lens, 14 mm, 1.5-module, transparent yellow: 5.46.681.023/1403 RK 90 - Lens, 14 mm, 1.5-module, transparent green: 5.46.681.023/1510 Final size Punched size RK 90 - Keycap body plastic, for lenses 2-module 4 Pict.: with lens, transparent yellow Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note 2-module yes 17.20 x 31.20 mm 13.85 x 27.85 mm 14.00 x 28.00 mm 5.55.103.077/1013 Please order lenses separately. Technical data see page 4 - 94 Lenses: RK 90 - Lens, 14 mm, 2-module, opaque red: 5.46.681.004/0309 RK 90 - Lens, 14 mm, 2-module, opaque yellow: 5.46.681.004/0409 RK 90 - Lens, 14 mm, 2-module, opaque green: 5.46.681.004/0514 RK 90 - Lens, 14 mm, 2-module, opaque blue: 5.46.681.004/0611 RK 90 - Lens, 14 mm, 2-module, opaque light grey: 5.46.681.004/0700 RK 90 - Lens, 14 mm, 2-module, transparent colourless: 5.46.681.024/1002 RK 90 - Lens, 14 mm, 2-module, transparent red: 5.46.681.024/1307 RK 90 - Lens, 14 mm, 2-module, transparent yellow: 5.46.681.024/1403 RK 90 - Lens, 14 mm, 2-module, transparent green: 5.46.681.024/1510 RK 90 4 - 96 Stock items are marked by bold printed order numbers. PCB Keyswitches RK 90 - Keycaps RK 90 - Keycaps, aluminum, 14 x 14 mm 0ICT NATURAL ANODIZED General Data 4HE 2+ SYSTEM DESIGN WITH METAL KEYCAPS IS FAIRLY SAFE AGAINST MECHANICAL THERMAL OR CHEMICAL EFFECTS #OMBINED WITH A METAL FRONT PANEL THIS DATA ENTRY SYSTEM OFFERS MAXIMUM PROTECTION AGAINST VANDALISM4RIED AND TESTED -)#/. 2!#/. OR 2& 0#" KEYSWITCHES ARE USED UNDERNEATH THE METAL KEYCAPS 4HE KEYCAPS CAN BE PROVIDED WITH ENGRAVED COLOURED ANODIZED OR LASER PRINTED LEGENDS4HIS MEANS THAT THE LEGEND IS DURABLE AND CANNOT BE REMOVED BY MECHANICAL OR CHEMICAL MEANS Technical Data 4 General information #OLOUR OF LENS Dimensions $IMENSION B IN FRONT OF FRONT PANEL $IMENSION A BEHIND FRONT PANEL $IMENSION C HOLE PATTERNS FINAL SIZE $IMENSION HOLE PATTERNS PUNCHED SIZE ALUMINUM COLOURLESS ANODIZED SEE ORDER BLOCK )0 3IZE $EGREE OF PROTECTION WITH SILICON SEAL SEE ORDER BLOCK SEE ORDER BLOCK SEE ORDER BLOCK SEE ORDER BLOCK RK 90 - Keycaps, aluminum, 14 mm, 1-module a b 2.80 18.35 RK 90 c 13.85 1.80 0ICT NATURAL ANODIZED Size Colour of lens Dimension (a) behind Dimension (b) in front panel front of front panel Dimension (c) hole patterns final size Order no. MODULE ALUMINUM COLOURLESS ANODIZED X MM X MM 4 - 98 X MM Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RK 90 - Keycaps RK 90 - Keycaps, aluminum, 14 mm, 11/2-module a b 2.80 c 18.35 13.85 1.80 Size Colour of lens Dimension (a) behind Dimension (b) in front panel front of front panel Dimension (c) hole patterns final size Order no. MODULE ALUMINUM COLOURLESS ANODIZED X MM X MM X MM 4ECHNICAL DATA SEE PAGE RK 90 - Keycaps, aluminum, 14 mm, 2-module a b 2.80 18.35 c 13.85 1.80 Size Colour of lens Dimension (a) behind Dimension (b) in front panel front of front panel Dimension (c) hole patterns final size Order no. MODULE ALUMINUM COLOURLESS ANODIZED X MM X MM X MM 4 4ECHNICAL DATA SEE PAGE RK 90 PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. 4 - 99 RK 90 - Keycaps RK 90 - Special accessories 0ICT CHARCOAL GREY Technical Data General information #OLOUR SEE ORDER BLOCK Dimensions $IMENSIONS SEE ORDER BLOCK RK 90 - Fin, to avoid inadvertent operation Mounting holes 0ICT CHARCOAL GREY 4 Short text Feature 1 Feature 2 Order no. 2+ &IN TO AVOID INADVERTENT OPERATION LIGHT GREY - - 2+ &IN TO AVOID INADVERTENT OPERATION CHARCOAL GREY - - 5.55.103.079/0152 RK 90 Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RK 90 - Keycaps RK 90 - Spacer M 4 Short text Feature 1 Feature 2 Order no. 2+ 3PACER - WITH2& KEYS HEIGHT MM MOUNTING FROM FRONT PC PER STUD 2+ 3PACER - WITH2& KEYS HEIGHT MM MOUNTING FROM REAR PC PER STUD 2+ 3PACER - WITH2& . KEYS HEIGHT MM MOUNTING FROM REAR PC PER STUD 2+ 3PACER - WITH 2!#/. KEYS HEIGHT MM MOUNTING FROM FRONT PC PER STUD 2+ 3PACER - WITH 2!#/. KEYS HEIGHT MM MOUNTING FROM REAR PC PER STUD - MM OVERALL HEIGHT FOR 2& MM OVERALL HEIGHT FOR 2& MM OVERALL HEIGHT FOR 2& . MM OVERALL HEIGHT FOR 2!#/. MM OVERALL HEIGHT FOR 2!#/. - 4ECHNICAL DATA SEE PAGE RK 90 - Silicone foil 600 x 590 x 0.45 mm 4 Short text Feature 1 Feature 2 Order no. 2+ 3ILICONE FOIL X X MM TRANSPARENT X X MM 4ECHNICAL DATA SEE PAGE RK 90 PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. RG 85 III - Short-travel system General Data Vandal-proof input system, ideally suited for elevator controls, info terminals, vending machines, etc. s %DGE ILLUMINATION AND SYMBOL ILLUMINATION POSSIBLE s #ONNECTION %ACH MODULE INDIVIDUALLY WITH AN PIN -ICRO -ATCH SOCKET CONNECTOR s -ODULAR FIXING SYSTEM WITH QUICK FASTENERS OR SINGLE FIXING s #ONTACT ARRANGEMENT ./ CONTACT OR .# ./ CONTACT s 6 M! MAX s $EGREE OF PROTECTION )0 KEYLOCK SWITCH )0 Content RG 85 III - Keyswitch 2' ))) +EYSWITCH ROUND DESIGN WITHOUT LENS 2' ))) +EYSWITCH SQUARE DESIGN WITHOUT LENS 4 - 106 RG 85 III - Keylock switch 2' ))) +EYLOCK SWITCH ROUND DESIGN WITHOUT LENS 2' ))) +EYLOCK SWITCH SQUARE DESIGN WITHOUT LENS 4 - 110 RG 85 III - Signal indicator, without lens 2' ))) 3IGNAL INDICATOR WITHOUT LENS 4 - 114 RG 85 III - Accessories 2' ))) ,ENSES FOR KEYSWITCHES ROUND 2' ))) ,ENSES FOR KEYSWITCHES SQUARE 2' ))) ,ENSES FOR KEYLOCK SWITCHES ROUND 2' ))) ,ENSES FOR KEYLOCK SWITCHES SQUARE 2' ))) ,ENS ROUND FOR SIGNAL INDICATORS 2' ))) ,ENS SQUARE FOR SIGNAL INDICATORS 2' ))) ,ENS TRIANGULAR FOR SIGNAL INDICATORS #ABLE WIRES WITH SOCKET CONNECTORS ON BOTH ENDS &IXING RAIL LENGTH MM 3PACER &IXING PIECE FOR MOUNTING THE ELEMENTS WITH THE RAIL FIXING METHOD 4 - 116 4 RG 85 III PCB Keyswitches 4 - 103 RG 85 III - Short-travel system System Features Keylock Switch Features Perfectly suited for: elevator controls, info terminals, vending machines, etc. L L L L L L Vandal proof construction Modular fixing system with quick fasteners or single fixing method using thread studs Connection with keyed 8-pin micro-match connector Degree of protection: IP40/65 L L L L L L Round or square design and lens shape Edge illumination in one or two colours with 4 LED for each colour Lens material: Aluminum or stainless steel with plastic inlays Contact arrangement: 1 NO Cylinder lock with pin tumblers Two switching positions: 0 and 90 degrees, key can be removed in any position Lock type 5201 - other lock types on request Included: 2 keys Micro-Match Connector Pin Assignment 1/3 NO contact 2 O V - LED 4 Edge illuminat./signal indicator 1st colour + 24 V DC +/- 20% 5 Symbol illumination + 24 V DC +/- 20% 6 Edge illuminat./signal indicator 2nd colour + 24 V DC +/- 20% 7/8 NC contact Pushbutton Features 4 L L L L L Round or square design and lens shape Edge illumination in one or two colours with 4 LED for each colour Pushbutton with 1 NO contact: Additional illumination of the symbol with 2 LED possible Lens material: Aluminum or stainless steel with plastic inlays Switching element: short-travel keyswitch RF 19 - 1 NO contact, non-illuminated - 1 NO contact, fully illuminated - 1 NC contact and 1 NO contact, non-illuminated Signal Indicator Features L L L Lens shape round, square or triangular (arrow shape) Lens material: Translucent plastic material Fully illuminated with 5 LED RG 85 III 4 - 104 PCB Keyswitches RG 85 III - Short-travel system Installation plan Rail fixing method Single fixing method 2.00 Distance threaded studs 55.00 0.10 Grid 55.00 Grid 35.00 (27.50) Distance threaded studs 55.00 0.10 7.25 0.05 (27.50) Distance threaded studs 55.00 0.10 Threaded studs M4 x (min.) 20 mm Spacer 5.30 163.024 12.08 Threaded studs M4 (min.) 14 mm Grid 55.00 Distance threaded studs 55.00 0.10 15.24 0.10 15.24 0.10 27.38 0.10 Grid 35.00 Fixing rail 5.41 032.173 Fixing element 5.41 032.173 4 Front panel RG 85 III PCB Keyswitches 4 - 105 RG 85 III - Short-travel system RG 85 III - Keyswitch Technical Data Dimensions -OUNTING GRID MIN ,ENGTH 7IDTH Mechanical design 6ERSION -OUNTING #ONTACT ARRANGEMENT #ONTACT MATERIALS 3YMBOL ILLUMINATION %DGE ILLUMINATION SEE ORDER BLOCK ON 5 RAILS OR SINGLE MOUNTING PIN -ICRO -ATCH FEMALE CONNECTOR SNAP ACTION ./ OR BRIDGE CONTACT .# ./ SEE ORDER BLOCK !G SEE ORDER BLOCK SEE ORDER BLOCK Mechanical characteristics /PERATING FORCE /PERATING TRAVEL 3WITCHING TRAVEL ./ 3WITCHING TRAVEL .# . MM MM MM 4ERMINALS #ONTACT SYSTEM 4 X MM MM MM Electrical characteristics 2ATED VOLTAGE MIN 2ATED VOLTAGE MAX 2ATED CURRENT MIN 2ATED CURRENT MAX 2ATED POWER MAX #ONTACT RESISTANCE WHEN NEW MAX #ONTACT RESISTANCE ACC TO LIFE MAX "OUNCING TIME MAX /PERATING VOLTAGE FOR ,%$ )NPUT CURRENT ,%$ Other specifications !MBIENT TEMP OPERATING MIN !MBIENT TEMP OPERATING MAX 3TORAGE TEMPERATURE MIN 3TORAGE TEMPERATURE MAX %NVIRONMENTAL RESTISTANCE /PERATING LIFE MIN OPERATIONS $EGREE OF PROTECTION RAIL MOUNTING $EGREE OF PROTECTION SINGLE MOUNTING &LAMMABILITY OF MATERIALS 6 6 M! M! 7 ME 3E MS 6 PER COLOUR,%$ ROW M! # # # # ACC TO )%# AND )0 )0 ACCORDING TO 5, (" Typical accessories RG 85 III - Keyswitch Description Photo #ABLE WIRES WITH SOCKET CONNECTORS ON BOTH ENDS LENGTH M RG 85 III Order no. Additional accessories see page 2' ))) ,ENSES FOR KEYSWITCHES ROUND STAINLESS STEEL 2' ))) ,ENSES FOR KEYSWITCHES SQUARE ALUMINUM Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Keyswitch, round design, without lens Contact arrangement Edge illumination Symbol illumination Version Order no. ./ ,%$ WHITE - ROUND ./ ,%$ RED - ROUND ./ ,%$ YELLOW - ROUND ./ ,%$ GREEN - ROUND ./ ,%$ BLUE - ROUND ./ ,%$ WHITE ,%$ BLUE - ROUND ./ ,%$ GREEN ,%$ RED - ROUND ./ ,%$ WHITE ,%$ YELLOW ROUND ./ ,%$ RED ,%$ RED ROUND ./ ,%$ YELLOW ,%$ GREEN ROUND ./ ,%$ GREEN ,%$ GREEN ROUND ./ ,%$ BLUE ,%$ BLUE ROUND ./ ,%$ WHITE ,%$ BLUE ,%$ BLUE ROUND ./ ,%$ GREEN ,%$ RED ,%$ RED ROUND .# ./ ,%$ WHITE - ROUND .# ./ ,%$ RED - ROUND .# ./ ,%$ YELLOW - ROUND .# ./ ,%$ GREEN - ROUND .# ./ ,%$ BLUE - ROUND .# ./ ,%$ WHITE ,%$ BLUE - ROUND .# ./ ,%$ GREEN ,%$ RED ROUND - RG 85 III 4ECHNICAL DATA SEE PAGE 0LEASE ORDER LENSES ROUND SHAPE SEPARATELY PCB Keyswitches 4 Stock items ARE MARKED BY bold printed order numbers. RG 85 III - Short-travel system RG 85 III - Keyswitch, square design, without lens 4 RG 85 III Contact arrangement Edge illumination Symbol illumination Version Order no. ./ ,%$ WHITE - SQUARE ./ ,%$ RED - SQUARE ./ ,%$ YELLOW - SQUARE ./ ,%$ GREEN - SQUARE ./ ,%$ BLUE - SQUARE ./ ,%$ WHITE ,%$ BLUE - SQUARE ./ ,%$ GREEN ,%$ RED - SQUARE ./ ,%$ WHITE ,%$ YELLOW SQUARE ./ ,%$ RED ,%$ RED SQUARE ./ ,%$ YELLOW ,%$ GREEN SQUARE ./ ,%$ GREEN ,%$ GREEN SQUARE ./ ,%$ BLUE ,%$ BLUE SQUARE ./ ,%$ WHITE ,%$ BLUE ,%$ BLUE SQUARE ./ ,%$ GREEN ,%$ RED ,%$ RED SQUARE .# ./ ,%$ WHITE - SQUARE .# ./ ,%$ RED - SQUARE .# ./ ,%$ YELLOW - SQUARE .# ./ ,%$ GREEN - SQUARE .# ./ ,%$ BLUE - SQUARE .# ./ ,%$ WHITE ,%$ BLUE - SQUARE .# ./ ,%$ GREEN ,%$ RED SQUARE - 4ECHNICAL DATA SEE PAGE 0LEASE ORDER LENSES SQUARE SHAPE SEPARATELY Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Keylock switch Technical Data Dimensions -OUNTING GRID MIN ,ENGTH 7IDTH -OUNTING DEPTH Mechanical design 6ERSION -OUNTING 4ERMINALS 4 #ONTACT SYSTEM #ONTACT ARRANGEMENT #ONTACT MATERIALS 3YMBOL ILLUMINATION %DGE ILLUMINATION ,OCK +EY REMOVAL POSITION Mechanical characteristics 2OTATING ANGLE 3WITCHING TRAVEL ./ 3WITCHING TRAVEL .# Electrical characteristics 2ATED VOLTAGE MIN 2ATED VOLTAGE MAX 2ATED CURRENT MIN 2ATED CURRENT MAX 2ATED POWER MAX #ONTACT RESISTANCE WHEN NEW MAX #ONTACT RESISTANCE ACC TO LIFE MAX "OUNCING TIME MAX /PERATING VOLTAGE FOR ,%$ )NPUT CURRENT ,%$ X MM MM MM MM WITH SEALING SEE ORDER BLOCK SEE ORDER BLOCK ON 5 RAILS OR SINGLE MOUNTING PIN -ICRO -ATCH FEMALE CONNECTOR CROSS CONTACT ./ !U ALLOY NONE SEE ORDER BLOCK CYLINDER LOCK LOCK TYPE 0OS Other specifications !MBIENT TEMP OPERATING MIN !MBIENT TEMP OPERATING MAX 3TORAGE TEMPERATURE MIN 3TORAGE TEMPERATURE MAX %NVIRONMENTAL RESTISTANCE /PERATING LIFE MIN OPERATIONS $EGREE OF PROTECTION RAIL MOUNTING $EGREE OF PROTECTION SINGLE MOUNTING &LAMMABILITY OF MATERIALS X MM SEE ORDER BLOCK 6 6 M! M! 1W ME 3E MS 6 PER COLOUR,%$ ROW M! # # # # ACC TO )%# AND )0 )0 ACCORDING TO 5, (" Typical accessories RG 85 III - Keylock switch Description Photo 2' ))) ,ENSES FOR KEYLOCK SWITCHES ROUND STAINLESS STEEL 2' ))) ,ENSES FOR KEYLOCK SWITCHES SQUARE ALUMINUM Order no. Additional accessories see page RG 85 III 4 - 110 Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Keylock switch, round design, without lens Contact arrangement Edge illumination Rotating angle Version Order no. ./ ,%$ WHITE X ROUND 3.99.400.141/2000 ./ ,%$ RED X ROUND 3.99.400.141/3000 ./ ,%$ YELLOW X ROUND ./ ,%$ GREEN X ROUND ./ ,%$ BLUE X ROUND 3.99.400.141/6000 ./ ,%$ WHITE ,%$ BLUE X ROUND ./ ,%$ GREEN ,%$ RED ROUND X 4ECHNICAL DATA SEE PAGE Accessoires: 2' ))) ,ENSES FOR KEYLOCK SWITCHES ROUND STAINLESS STEEL 0LEASE ORDER LENSES ROUND SHAPE SEPARATELY 4 RG 85 III PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. 4 - 111 RG 85 III - Short-travel system RG 85 III - Keylock switch, square design, without lens Contact arrangement Edge illumination Rotating angle Version Order no. ./ ,%$ WHITE X SQUARE ./ ,%$ RED X SQUARE ./ ,%$ YELLOW X SQUARE ./ ,%$ GREEN X SQUARE ./ ,%$ BLUE X SQUARE ./ ,%$ WHITE ,%$ BLUE X SQUARE ./ ,%$ GREEN ,%$ RED SQUARE X 4ECHNICAL DATA SEE PAGE Accessoires: 2' ))) ,ENSES FOR KEYLOCK SWITCHES SQUARE STAINLESS STEEL 0LEASE ORDER LENSES SQUARE SHAPE SEPARATELY 4 RG 85 III Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Signal indicator, without lens Technical Data Dimensions -OUNTING GRID MIN ,ENGTH 7IDTH Mechanical design 6ERSION -OUNTING 4ERMINALS )LLUMINATION Electrical characteristics /PERATING VOLTAGE FOR ,%$ )NPUT CURRENT ,%$ 4 X MM MM MM ACCORDING TO LENS ON 5 RAILS OR SINGLE MOUNTING PIN -ICRO -ATCH FEMALE CONNECTOR SEE ORDER BLOCK Other specifications !MBIENT TEMP OPERATING MIN !MBIENT TEMP OPERATING MAX 3TORAGE TEMPERATURE MIN 3TORAGE TEMPERATURE MAX %NVIRONMENTAL RESTISTANCE $EGREE OF PROTECTION RAIL MOUNTING $EGREE OF PROTECTION SINGLE MOUNTING &LAMMABILITY OF MATERIALS # # # # ACC TO )%# AND )0 )0 ACCORDING TO 5, (" 6 DEPENDING ON ,%$ COLOUR M! Typical accessories RG 85 III - Signal indicator, without lens Description Photo #ABLE WIRES WITH SOCKET CONNECTORS ON BOTH ENDS LENGTH M Order no. Additional accessories see page 2' ))) ,ENS SQUARE FOR SIGNAL INDICATORS 2' ))) ,ENS ROUND FOR SIGNAL INDICATORS 2' ))) ,ENS TRIANGULAR FOR SIGNAL INDICATORS 5.04.903.011/0000 RG 85 III 4 - 114 Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Signal indicator, without lens Illumination Order no. ,%$ WHITE ,%$ RED ,%$ YELLOW ,%$ GREEN ,%$ BLUE ,%$ WHITE ,%$ BLUE ,%$ GREEN ,%$ RED 4ECHNICAL DATA SEE PAGE 0LEASE ORDER ROUND SQUARE OR TRIANGULAR LENSES SEPARATELY 4 RG 85 III PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. RG 85 III - Short-travel system RG 85 III - Accessories RG 85 III - Lenses for keyswitches, round 4 RG 85 III Version Form of lens Legending colour Legending Order no. ALUMINUM ROUND - - ALUMINUM ROUND OPAQUE BLACK 1 ALUMINUM ROUND TRANSLUCENT WHITE 1 ALUMINUM ROUND OPAQUE BLACK ALUMINUM ROUND TRANSLUCENT WHITE ALUMINUM ROUND OPAQUE BLACK 3 ALUMINUM ROUND TRANSLUCENT WHITE 3 ALUMINUM ROUND OPAQUE BLACK 4 ALUMINUM ROUND TRANSLUCENT WHITE 4 ALUMINUM ROUND OPAQUE BLACK ALUMINUM ROUND TRANSLUCENT WHITE ALUMINUM ROUND OPAQUE BLACK ALUMINUM ROUND TRANSLUCENT WHITE ALUMINUM ROUND OPAQUE BLACK 5 ALUMINUM ROUND TRANSLUCENT WHITE 5 Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. ALUMINUM ROUND OPAQUE BLACK K ALUMINUM ROUND TRANSLUCENT WHITE K ALUMINUM ROUND OPAQUE BLACK % ALUMINUM ROUND TRANSLUCENT WHITE % ALUMINUM ROUND OPAQUE YELLOW SYMBOL uBELLh ALUMINUM ROUND OPAQUE BLACK SYMBOL uOPEN DOORh ALUMINUM ROUND TRANSLUCENT WHITE SYMBOL uOPEN DOORh ALUMINUM ROUND OPAQUE BLACK SYMBOL uCLOSE DOORh ALUMINUM ROUND TRANSLUCENT WHITE SYMBOL uCLOSE DOORh ALUMINUM ROUND OPAQUE BLACK SYMBOL uVENTILATORh ALUMINUM ROUND TRANSLUCENT WHITE SYMBOL uVENTILATORh ALUMINUM ROUND OPAQUE BLACK SYMBOL uARROWh ALUMINUM ROUND TRANSLUCENT WHITE SYMBOL uARROWh STAINLESS STEEL ROUND - - STAINLESS STEEL ROUND OPAQUE BLACK 1 STAINLESS STEEL ROUND TRANSLUCENT WHITE 1 STAINLESS STEEL ROUND OPAQUE BLACK STAINLESS STEEL ROUND TRANSLUCENT WHITE STAINLESS STEEL ROUND OPAQUE BLACK 3 STAINLESS STEEL ROUND TRANSLUCENT WHITE 3 STAINLESS STEEL ROUND OPAQUE BLACK 4 STAINLESS STEEL ROUND TRANSLUCENT WHITE 4 STAINLESS STEEL ROUND OPAQUE BLACK STAINLESS STEEL ROUND TRANSLUCENT WHITE STAINLESS STEEL ROUND OPAQUE BLACK STAINLESS STEEL ROUND TRANSLUCENT WHITE STAINLESS STEEL ROUND OPAQUE BLACK 5 STAINLESS STEEL ROUND TRANSLUCENT WHITE 5 PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. 4 RG 85 III RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. stainless steel round opaque black K 5.04.914.022/0100 stainless steel round translucent white K 5.04.914.022/2000 stainless steel round opaque black E 5.04.914.023/0100 stainless steel round translucent white E 5.04.914.023/2000 stainless steel round opaque yellow symbol bell" 5.04.914.024/0400 stainless steel round opaque black symbol open door" 5.04.914.025/0100 stainless steel round translucent white symbol open door" 5.04.914.025/2000 stainless steel round opaque black symbol close door" 5.04.914.026/0100 stainless steel round translucent white symbol close door" 5.04.914.026/2000 stainless steel round opaque black symbol ventilator" 5.04.914.027/0100 stainless steel round translucent white symbol ventilator" 5.04.914.027/2000 stainless steel round opaque black symbol arrow" 5.04.914.028/0100 stainless steel round translucent white symbol arrow" 5.04.914.028/2000 Technical data see page 4 - 114 The lenses without legending can not be engraved - other than the mentioned legends on request. RG 85 III - Lenses for keyswitches, square 4 RG 85 III Version Form of lens Legending colour Legending Order no. aluminum square - - 5.04.915.100/2000 aluminum square opaque black 1 5.04.915.101/0100 aluminum square translucent white 1 5.04.915.101/2000 aluminum square opaque black 2 5.04.915.102/0100 aluminum square translucent white 2 5.04.915.102/2000 aluminum square opaque black 3 5.04.915.103/0100 4 - 118 Stock items are marked by bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. ALUMINUM SQUARE TRANSLUCENT WHITE 3 ALUMINUM SQUARE OPAQUE BLACK 4 ALUMINUM SQUARE TRANSLUCENT WHITE 4 ALUMINUM SQUARE OPAQUE BLACK ALUMINUM SQUARE TRANSLUCENT WHITE ALUMINUM SQUARE OPAQUE BLACK ALUMINUM SQUARE TRANSLUCENT WHITE ALUMINUM SQUARE OPAQUE BLACK 5 ALUMINUM SQUARE TRANSLUCENT WHITE 5 ALUMINUM SQUARE OPAQUE BLACK K ALUMINUM SQUARE TRANSLUCENT WHITE K ALUMINUM SQUARE OPAQUE BLACK % ALUMINUM SQUARE TRANSLUCENT WHITE % ALUMINUM SQUARE OPAQUE YELLOW SYMBOL uBELLh ALUMINUM SQUARE OPAQUE BLACK SYMBOL uOPEN DOORh ALUMINUM SQUARE TRANSLUCENT WHITE SYMBOL uOPEN DOORh ALUMINUM SQUARE OPAQUE BLACK SYMBOL uCLOSE DOORh ALUMINUM SQUARE TRANSLUCENT WHITE SYMBOL uCLOSE DOORh ALUMINUM SQUARE OPAQUE BLACK SYMBOL uVENTILATORh ALUMINUM SQUARE TRANSLUCENT WHITE SYMBOL uVENTILATORh ALUMINUM SQUARE OPAQUE BLACK SYMBOL uARROWh ALUMINUM SQUARE TRANSLUCENT WHITE SYMBOL uARROWh STAINLESS STEEL SQUARE - - STAINLESS STEEL SQUARE OPAQUE BLACK 1 STAINLESS STEEL SQUARE TRANSLUCENT WHITE 1 STAINLESS STEEL SQUARE OPAQUE BLACK STAINLESS STEEL SQUARE TRANSLUCENT WHITE STAINLESS STEEL SQUARE OPAQUE BLACK 3 PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. 4 RG 85 III RG 85 III - Short-travel system 4 Version Form of lens Legending colour Legending Order no. STAINLESS STEEL SQUARE TRANSLUCENT WHITE 3 STAINLESS STEEL SQUARE OPAQUE BLACK 4 STAINLESS STEEL SQUARE TRANSLUCENT WHITE 4 STAINLESS STEEL SQUARE OPAQUE BLACK STAINLESS STEEL SQUARE TRANSLUCENT WHITE STAINLESS STEEL SQUARE OPAQUE BLACK STAINLESS STEEL SQUARE TRANSLUCENT WHITE STAINLESS STEEL SQUARE OPAQUE BLACK 5 STAINLESS STEEL SQUARE TRANSLUCENT WHITE 5 STAINLESS STEEL SQUARE OPAQUE BLACK K STAINLESS STEEL SQUARE TRANSLUCENT WHITE K STAINLESS STEEL SQUARE OPAQUE BLACK % STAINLESS STEEL SQUARE TRANSLUCENT WHITE % STAINLESS STEEL SQUARE OPAQUE YELLOW SYMBOL uBELLh STAINLESS STEEL SQUARE OPAQUE BLACK SYMBOL uOPEN DOORh STAINLESS STEEL SQUARE TRANSLUCENT WHITE SYMBOL uOPEN DOORh STAINLESS STEEL SQUARE OPAQUE BLACK SYMBOL uCLOSE DOORh STAINLESS STEEL SQUARE TRANSLUCENT WHITE SYMBOL uCLOSE DOORh STAINLESS STEEL SQUARE OPAQUE BLACK SYMBOL uVENTILATORh STAINLESS STEEL SQUARE TRANSLUCENT WHITE SYMBOL uVENTILATORh STAINLESS STEEL SQUARE OPAQUE BLACK SYMBOL uARROWh STAINLESS STEEL SQUARE TRANSLUCENT WHITE SYMBOL uARROWh 4HE LENSES WITHOUT LEGENDING CAN NOT BE ENGRAVED OTHER THAN THE MENTIONED LEGENDS ON REQUEST RG 85 III Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system RG 85 III - Lenses for keylock switches, round Version Form of lens Legending colour Legending Order no. ALUMINUM ROUND - - 5.04.915.200/2000 STAINLESS STEEL ROUND - - RG 85 III - Lenses for keylock switches, square Version Form of lens Legending colour Legending Order no. ALUMINUM SQUARE - - STAINLESS STEEL SQUARE - - 4 RG 85 III - Lens, round, for signal indicators Version Form of lens Legending colour Legending Order no. PLASTIC TRANSLUCENT ROUND - - RG 85 III PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. RG 85 III - Short-travel system RG 85 III - Lens, square, for signal indicators Version Form of lens Legending colour Legending Order no. PLASTIC TRANSLUCENT SQUARE - - RG 85 III - Lens, triangular, for signal indicators Version Form of lens Legending colour Legending Order no. PLASTIC TRANSLUCENT TRIANGULAR - - 5.04.903.011/0000 4 Cable, 8 wires, with socket connectors on both ends Version Form of lens Legending colour Legending Order no. LENGTH M - - - LENGTH M - - - RG 85 III Stock items ARE MARKED BY bold printed order numbers. PCB Keyswitches RG 85 III - Short-travel system Fixing rail, length 490 mm Version Form of lens Legending colour Legending Order no. LENGTH MM - - - Version Form of lens Legending colour Legending Order no. MOUNTING ON RAILS - - - SINGLE MOUNTING - - - Spacer 4 Fixing piece for mounting the elements with the rail fixing method Version Form of lens Legending colour Legending Order no. - - - - RG 85 III PCB Keyswitches Stock items ARE MARKED BY bold printed order numbers. RS 76 - Full-travel keyswitches General Data The RS 76 full-travel keyswitches are designed for configuring keyboards. They offer very comfortable operation with an overall height of 15.5 / 15.9 mm and a key travel of 4 mm. The modular system with a grid of 3/4" = 19.05 mm enables you to design any key block you may want. Mechanical contact system RS 76 M A gold alloy is used as the contact material and provides high contact reliability, low contact resistance and short bouncing time. Solid-state contact system RS 76 C The solid-state switch in Hall-IC technology ensures bounce-free and wear-free switching and a long operating life. Function: When pressing the keys, a permanent magnet changes its position relative to the Hall-IC and thereby generates an output signal. Their use is especially recommended in hostile environments and for heavy duty applications. Content RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, with diode, not illuminable RS 76 M - Full-travel keyswitch, illuminable RS 76 M - Full-travel keyswitch, illuminable, momentary RS 76 M - Full-travel keyswitch, illuminable, latching RS 76 MX - Full-travel keyswitch, fully illuminable RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, illuminable RS 76 C - Full-travel keyswitch, illuminable, momentary RS 76 C - Full-travel keyswitch, illuminable, latching RS 76 - Keycaps, not illuminable RS 76 - Keycap, opaque RS 76 - Keycap, opaque, with nail protection RS 76 - Keycap with legend insert RS 76 - Keycaps, illuminable RS 76 - Keycap with light bar RS 76 - Keycap, illuminable, with legend insert RS 76 - Keycap, illuminable, with nail protection and legend insert RS 76 - Keycap, illuminable, with legend insert RS 76 MX - Keycap, fully illuminable RS 76 - Keycaps, with legend, two-shot moulded/keycap sets RS 76 - Keycap set, symbols A-Z RS 76 - Keycap set, symbols 0-9 RS 76 - Accessories RS 76 - Cover IP40 4 - 132 4 - 133 4 - 133 4 - 134 4 - 135 4 - 135 4 - 136 4 - 138 4 - 139 4 - 140 4 - 141 4 - 141 4 - 142 4 - 142 4 - 142 4 - 143 4 - 144 4 - 144 4 - 144 4 - 145 4 - 145 4 - 146 4 - 148 4 - 148 4 - 149 4 - 150 4 - 151 PCB Keyswitches 4 - 125 4 RS 76 RS 76 - Full-travel keyswitches The RAFI full-travel keyswitches RS 76 are modular systems for designing individual key blocks and keyboards in the 3/4 inch (= 19.05 mm) grid. Definitions Momentary keyswitches Momentary keyswitches return to their initial position after being pressed (momentary action). Latching keyswitches Latching keyswitches lock when actuated and are returned to their initial position when pressed again (push-push action). Keycap, n-module A 2-module keycap f. ex. has the twofold length of a 1-module keycap. Contact principle There are two contact principles: - Mechanical (M): Cross contact (RS 76 M) Bridge contact (RS 76 M, illuminated) - Contactless (C): Based on Hall-IC (RS 76 C) Manual Soldering The soldering temperature should not exceed 300 C and the soldering time should be less than 5 seconds. Keycap materials Keycap without legend insert: ABS Keycap with legend insert: - Keycap body: ABS - Lens: PC Legending of keycaps Keycaps can be legended by different methods: Two-shot moulding Using this method the symbol is separately manufactured from a plastic and then the appropriate keycap form is moulded round it. Advantage: The character becomes a integrated part of the keycap, thus eliminating abrasion. All RAFI keycap sets with standard legending are manufatured by this method. Customer specific two-shot moulded keycaps on request. 4 Printing Keycaps can be printed with a two-component ink on request. The abrasin of this kind of legending is high. This method of legending is suitable for average volumes. Engraving In this labour intensive process the keycaps are engraved with the required symbol, then inlaid with ink. Only used for small volumes. Laser-printing This method of legending can be recommended when complete keyboards are required in different keyboard layouts for which RAFI will develop the respective software. The keyboards can then be legended within a short time. This method of legending ist particularly recommended for average to large volumes. Legend inserts In the case of keycaps with replaceable legend inserts it is possible to print or engrave the legend inserts. As these insets are protected by the lens, there can be no abrasion here either. RS 76 4 - 126 PCB Keyswitches RS 76 - Full-travel keyswitches Design No. Description 1.1 Keyswitch RS 76 C 1.2 Keyswitch RS 76 C with LED 1.3 Keyswitch RS 76 M 1.4 Keyswitch R 76 M with LED 2 Keycap, 1- resp. multi-module 3 Keycap with nail protection, 1- resp. multi-module 5 Keycap, illuminated 6 Keycap, illuminated 7 Keycap, illuminated 9.1 LED 9.2 10.1 10.2 10.3 10.4 11 Spacer for LED (for RS 76 C only) Plunger for mult-moduel keycaps* Sleeve for multi-moduel keycaps* Metal lever for multi-module keycaps* Bearing bracket for multi-module keycaps* Covers * These parts are included as a complete packet in the delivery of keycaps 2-module. 4 RS 76 PCB Keyswitches 4 - 127 RS 76 - Full-travel keyswitches Hole Pattern PCB RS 76 M/RS 76 C The hole patterns apply to the horizontal position of the keycaps only. Should they be in a vertical position, the momentary keyswitch must be mounted accordingly, i. e. rotated by 90. For 1 - 13/4-module keycaps (view on component side) Momentary keyswitch, non-illuminated Momentary keyswitch, illuminated RS 76 M RS 76 C 4 For 2-, 3- and 8-module keycaps (view on component side) RS 76 M/C Hole diam. 2 Nor through-plating s HOLES FOR BEARING BRACKET DIAM No through-plating Keycap RS 76 4 - 128 L1 mm L2 mm 2-module 25,40 22,86 3-module 30,48 24,13 5-module 68,58 68,58 Metal bow touches the surface of PCB, in this area no conductor tracks on component side Important note: In the case of 2-, 3- and 8-module keycaps, additional holes must be provided for the accessories. In the case of keycaps < 2-module, neither accessories nor holes are required. PCB Keyswitches RS 76 - Full-travel keyswitches Specific Technical Data RS 76 C Output pulse diagram Dynamic characteristics (max.) Tw = 25 C Tw = 50 C Tw = 70 C Turn-on delay time tPHL 3 s 7 s 10 s Turn-off delay time tPHL 4 s 5 s 6 s Fall/rise time tPHL 2 s 2,5 s 3 s tPHL 1 s 1,5 s 2,5 s 4 Block diagram Hall IC Static with Enable Input RS 76 PCB Keyswitches 4 - 129 RS 76 - Full-travel keyswitches Examples for Application RS 76 C Driving of logic components Indication of logical states Driving of a PNP transistor Use as static key with open collector output. Output transistor (NPN) is conductive when actuated. 4 RS 76 Use in keyboards 4 - 130 PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals 4 19.05 mm Contact system Contact arrangement Contact materials Illumination momentary soldering solder terminals, tin-plated cross contact 1 NO Au alloy no Mechanical characteristics Operating force max. Operating travel Switching travel Robustness min. see order block 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. 2 V (with Diode 3 V) 35 V 0.01 mA 100 mA Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials 1W 100 mE (without diode) 3E (without diode) 109 E 8 kV 5 ms -25 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2 -14, -30, -33 and -78 107 IP40 UL 94 HB Typical accessories RS 76 M - Full-travel keyswitch, not illuminable Description Photo Order no. RS 76 C - Keycap with legend insert Additional accessories see page 4 - 143 5.04.665.221/5520 RS 76 C - Keycap, opaque, with nail protection 5.80.000.000/0152 4 - 142 RS 76 C - Keycap, opaque 5.82.000.000/0152 4 - 142 RS 76 4 - 132 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Bestell-Nr. momentary no 1 NO Au alloy 4 mm 0.9 N 3.13.002.502/0000 momentary no 1 NO Au alloy 4 mm 1.4 N 3.13.002.512/0000 Technical data see page 4 - 132 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 M - Full-travel keyswitch, with diode, not illuminable Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Bestell-Nr. momentary no 1 NO Au alloy 4 mm 0.9 N 3.13.005.001/0000 momentary no 1 NO Au alloy 4 mm 1.4 N 3.13.005.011/0000 4 Technical data see page 4 - 132 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 133 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, illuminable Pict.: RS 76M, for spot illumination RS 76MX, for full illumination RS 76MX, keyboard fully illuminated Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals 4 19.05 mm Contact system Contact arrangement Contact materials Illumination see order block soldering solder terminals, tin-plated bridge contact 1 NO Au alloy see order block Mechanical characteristics Operating force max. Operating travel Switching travel Robustness min. 1N 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. 2V 35 V 0.01 mA 100 mA Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. Other specifications Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials 1W 200 mE 3E 109 E 8 kV 10 ms -25 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2 -14, -30, -33 and -78 107 momentary, 105 latching IP40 UL 94 HB Typical accessories RS 76 M - Full-travel keyswitch, illuminable Description Photo Order no. RS 76 - Cover IP40, 1-module, charcoal grey Additional accessories see page 4 - 151 5.04.520.174/0152 RS 76 C - Keycap, illuminated, with legend insert 5.04.665.521/5520 4 - 144 RS 76 C - Keycap, illuminated, with nail protection and legend insert 5.04.665.911/5520 4 - 145 RS 76 C - Keycap with light bar 5.82.110.000/0242 4 - 144 RS 76 4 - 134 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, illuminable, momentary Pict.: RS 76M, for spot illumination Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact spot illumination possible with 3 LED 19.05 mm 3.13.002.102/0000 Technical data see page 4 - 134 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 M - Full-travel keyswitch, illuminable, latching Contact function Contact system Illumination Recommended key grid Order no. latching bridge contact spot illumination possible with 3 LED 19.05 mm 3.13.002.022/0000 Technical data see page 4 - 134 4 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 135 RS 76 - Full-travel keyswitches RS 76 MX - Full-travel keyswitch, fully illuminable Pict.: RS 76MX, for full illumination Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact 2 SMT LED needed 19.05 mm 3.13.002.922/0000 Technical data see page 4 - 134 Accessoires: RS 76 MX - Keycap, fully illuminated: 5.05.511.168/0209 RS 76 MX - Keycap, fully illuminated: 5.05.511.168/0754 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. The SMT LEDs are soldered on the back of the printed circuit board and shine through openings in the board and keyswitch housing. 4 RS 76 4 - 136 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, not illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Illumination momentary soldering solder terminals, tin-plated contactless with Hall-IC no Mechanical characteristics Switching travel off Operating force max. Operating travel Switching travel on Robustness min. 0.8 ... 2.4 mm see order block 4 mm 1.5 - 2.8 mm 100 N Electrical characteristics Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.4V Output load current (Q) max. Output residual current (Q) max. 4.75 ... 5.25 V 0.5 mA 5 mA 0.4 V 5.25 V 16 mA 10 A Contact system 4 19.05 mm Output saturation voltage (Q) max. bei 16 mA ESD strength max. Output switching times (Q) at 25 C, tPHL Output switching times (Q) at 25 C, tPLH Output switching times (Q) at 25 C, tTHL Output switching times (Q) at 25 C, tTLH Other specifications Reliability of Hall-IC at 25 C Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials 0.4 V 8 kV 3 s 4 s 1 s 2 s = 2.5 x 10-7 h-1 0 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2 -14, -30, -33 and -78 see order block IP40 UL 94 HB Typical accessories RS 76 C - Full-travel keyswitch, not illuminable Description Photo Order no. RS 76 C - Keycap with legend insert Additional accessories see page 4 - 143 5.04.665.221/5520 RS 76 C - Keycap, opaque, with nail protection 5.80.000.000/0152 4 - 142 RS 76 C - Keycap, opaque 5.82.000.000/0152 4 - 142 RS 76 4 - 138 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, not illuminable Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. momentary 108 no 0.7 N 4 mm 3.13.001.010/0000 momentary 108 no 1N 4 mm 3.13.001.210/0000 Technical data see page 4 - 138 For accessories and keycaps, refer to RS 76. For applications, refer to the general description of RS 76. 4 RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 139 RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Illumination LED colour see order block soldering solder terminals, tin-plated contactless with Hall-IC with LED see order block Mechanical characteristics Switching travel on Switching travel off Operating force max. Operating travel Robustness min. 1.5 - 2.8 mm 0.8 ... 2.4 mm 0.7 N 4 mm 100 N Electrical characteristics Number of LED Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.4V Output load current (Q) max. see order block 4.75 ... 5.25 V 0.5 mA 5 mA 0.4 V 5.25 V 16 mA Contact system 4 19.05 mm Output residual current (Q) max. Output saturation voltage (Q) max. bei 16 mA ESD strength max. Output switching times (Q) at 25 C, tPHL Output switching times (Q) at 25 C, tPLH Output switching times (Q) at 25 C, tTHL Output switching times (Q) at 25 C, tTLH Other specifications Reliability of Hall-IC at 25 C Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. (product) Storage temperature max. (rail) Environmental restistance Operating life min. (operations) Degree of protection Flammability of materials 10 A 0.4 V 8 kV 3 s 4 s 1 s 2 s = 2.5 x 10 -7 h-1 0 C +70 C -40 C +80 C +50 C acc. to IEC 60068-2 -14, -30, -33 and -78 see order block IP40 UL 94 HB Typical accessories RS 76 C - Full-travel keyswitch, illuminable Description RS 76 RS 76 - Cover IP40, 1-module, light grey Additional accessories see page 4 - 151 5.04.520.174/0242 RS 76 C - Keycap, illuminated, with legend insert 5.04.665.521/5520 4 - 144 RS 76 C - Keycap, illuminated, with nail protection and legend insert 5.04.665.911/5520 4 - 145 4 - 140 Photo Stock items are marked by bold printed order numbers. Order no. PCB Keyswitches RS 76 - Full-travel keyswitches Typical accessories RS 76 C - Full-travel keyswitch, illuminable Description Photo RS 76 C - Keycap with light bar Order no. Additional accessories see page 4 - 144 5.82.110.000/0242 RS 76 C - Full-travel keyswitch, illuminable, momentary Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. momentary 108 with LED 0.7 N 3.13.001.110/0000 4 mm Technical data see page 4 - 140 RS 76 C - Full-travel keyswitch, illuminable, latching 4 Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. latching 105 with LED 0.7 N 3.13.001.130/0000 4 mm Technical data see page 4 - 140 RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 141 RS 76 - Full-travel keyswitches RS 76 - Keycaps, not illuminable Pict.: light beige opaque with nail protection charcoal grey / white transparent colourless RS 76 - Keycap, opaque Pict.: dark grey light beige Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/- - 5.82.000.000/0152 1-module no light grey/- - 5.82.000.000/0242 Keycap sets available in two-shot moulded design. 4 Other keycap sizes, e.g. 1.25-, 1.5-, 1.75-, 2-, 3-, 5- and 8-module versions available on request. RS 76 - Keycap, opaque, with nail protection Pict.: light beige opaque with nail protection charcoal grey / white Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/- - 5.80.000.000/0152 1-module no light grey/- - 5.80.000.000/0242 Keycap sets available in two-shot moulded design. Other keycap sizes, e.g. 1.25-, 1.5-, 1.75-, 2-, 3- and 8-module versions available on request. RS 76 4 - 142 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 - Keycap with legend insert Pict.: transparent colourless Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/- colourless/white 5.04.665.221/5520 1-module no light grey/- colourless/white 5.04.665.230/5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colours on request. 4 RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 143 RS 76 - Full-travel keyswitches RS 76 - Keycaps, illuminable light beige RS 76 - Keycap with light bar Pict.: light beige Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes light grey/- - 5.82.110.000/0242 1-module yes charcoal grey/- - 5.82.110.000/0152 Other colours on request. 4 RS 76 - Keycap, illuminable, with legend insert Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white 5.04.665.521/5520 1-module yes light grey/- colourless/white 5.04.665.530/5520 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colours on request. RS 76 4 - 144 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 - Keycap, illuminable, with nail protection and legend insert Pict.: light grey, yellow lens Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white 5.04.665.911/5520 1-module yes light grey/- colourless/white 5.04.665.920/5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colours on request. RS 76 - Keycap, illuminable, with legend insert Pict.: red Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white 5.04.665.161/5520 1-module yes light grey/- colourless/white 5.04.665.170/5520 4 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colours on request. RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 145 RS 76 - Full-travel keyswitches RS 76 MX - Keycap, fully illuminable RS 76MX, keyboard fully illuminated Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes white/- white translucent/- 5.05.511.168/0209 1-module yes light grey/- white translucent/- 5.05.511.168/0754 11/4-module yes white/- white translucent/- 5.05.511.169/0209 11/2-module yes white/- white translucent/- 5.05.511.170/0209 13/4-module yes white/- white translucent/- 5.05.511.171/0209 11/4-module with light conductor yes white/- white translucent/- 5.05.511.173/0209 Laser-printed versions available on request. 4 RS 76 4 - 146 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 - Keycaps, with legend, two-shot moulded/keycap sets Pict.: opaque light beige / brown opaque light beige / brown RS 76 - Keycap set, symbols A-Z Pict.: opaque light beige / brown Form of lens Colour of keycap / legending Symbol Order no. 1-module charcoal grey/white A-Z 5.00.999.500/0000 light grey/black A-Z 5.00.999.824/0000 1-module keycap opaque with nail protection keycap opaque with nail protection keycap opaque charcoal grey/white A-Z 5.00.999.525/0000 1-module keycap opaque light grey/black A-Z 5.00.999.825/0000 1-module 4 light beige Size of keycap Other symbols and colours on request. RS 76 4 - 148 Stock items are marked by bold printed order numbers. PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 - Keycap set, symbols 0-9 Pict.: opaque light beige / brown opaque with nail protection charcoal grey / white Size of keycap Form of lens Colour of keycap / legending Symbol Order no. 1-module charcoal grey/white 0-9 5.00.999.504/0000 light grey/black 0-9 5.00.999.826/0000 1-module keycap opaque with nail protection keycap opaque with nail protection keycap opaque charcoal grey/white 0-9 5.00.999.529/0000 1-module keycap opaque light grey/black 0-9 5.00.999.827/0000 1-module Other symbols and colours on request. 4 RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 149 RS 76 - Full-travel keyswitches RS 76 - Accessories Pict.: light beige dark grey 4 RS 76 4 - 150 PCB Keyswitches RS 76 - Full-travel keyswitches RS 76 - Cover IP40 Pict.: light beige Short text Feature 1 Feature 2 Order no. RS 76 - Cover IP40, 1/4-module, charcoal grey charcoal grey 1/4-module 5.04.520.171/0152 RS 76 - Cover IP40, 1/4-module, light grey light grey 1/4-module 5.04.520.171/0242 RS 76 - Cover IP40, 1/4-module, light beige light beige 1/4-module 5.04.520.171/0710 RS 76 - Cover IP40, 1/4-module, dark grey dark grey 1/4-module 5.04.520.171/0801 RS 76 - Cover IP40, 1/2-module, charcoal grey charcoal grey 1/2-module 5.04.520.172/0152 RS 76 - Cover IP40, 1/2-module, light grey light grey 1/2-module 5.04.520.172/0242 RS 76 - Cover IP40, 1/2-module, light beige light beige 1/2-module 5.04.520.172/0710 RS 76 - Cover IP40, 1/2-module, dark grey dark grey 1/2-module 5.04.520.172/0801 RS 76 - Cover IP40, 3/4-module, charcoal grey charcoal grey 3/4-module 5.04.520.173/0152 RS 76 - Cover IP40, 3/4-module, light grey light grey 3/4-module 5.04.520.173/0242 RS 76 - Cover IP40, 3/4-module, light beige light beige 3/4-module 5.04.520.173/0710 RS 76 - Cover IP40, 3/4-module, dark grey dark grey 3/4-module 5.04.520.173/0801 RS 76 - Cover IP40, 1-module, charcoal grey charcoal grey 1-module 5.04.520.174/0152 RS 76 - Cover IP40, 1-module, light grey light grey 1-module 5.04.520.174/0242 RS 76 - Cover IP40, 1-module, light beige light beige 1-module 5.04.520.174/0710 RS 76 - Cover IP40, 1-module, dark grey dark grey 1-module 5.04.520.174/0801 4 Other colours on request. RS 76 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 151 Keylock and rotary switches for PCB General Data Keylock switches for PCB mounting. Matching with the RS 76 full-travel keyswitches and the RF 15 and RF 19 short-travel keyswitches. Content MICROMEC - Keylock switch IP54 MICROMEC - Keylock switch IP54 4 - 154 4 - 156 EUROLOCKS - Keylock switch IP54 EUROLOCKS - Keylock switch IP54 4 - 158 4 - 159 Priority keylock switch IP54 Priority keylock switch IP54 4 - 160 4 - 161 Rotary switch IP40 Rotary switch IP40 4 - 162 4 - 163 PCB Keyswitches 4 - 153 4 Key Switches Keylock and rotary switches for PCB MICROMEC - Keylock switch IP54 Pict.: light grey PCB hole pattern, component side Technical Data General information Colour Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system 4 Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Symmetric key Group key Key removal position General key soldering tin-plated cross contact self cleaning see order block Au alloy no Micromec 5 001 500 on request no on request see order block on request Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials 0.04 ... 0.10 Nm 2 Nm 500 V 1W 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 UL 94 HB Typical accessories MICROMEC - Keylock switch IP54 Description Photo O-ring for keylock switch Key Switches Order no. Additional accessories see page 5 - 25 5.30.120.015/0100 Spare key, for single action, e.g. 1 x 90 (delivery content 1 key) 5.58.007.001/0000 Spare key, for double action, e.g. 2 x 90 (delivery content 1 key) 5.58.008.001/0000 Spare key for 3 angles, f.ex. 3 x 90 degree (content 1 key) 5.58.009.001/0100 4 - 154 Stock items are marked by bold printed order numbers. PCB Keyswitches Keylock and rotary switches for PCB Typical accessories MICROMEC - Keylock switch IP54 Description Photo Spare key for 4 angles, f.ex. 4 x 90 degrees, (content 1 key) Order no. Additional accessories see page 5.58.010.001/0100 Configuration Diagram/Dimensional Drawing Hole patterns PCB View on component side 4 Switching position Contact function 0 1 2 3 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 155 Key Switches Keylock and rotary switches for PCB MICROMEC - Keylock switch IP54 Pict.: charcoal grey 4 PCB hole pattern, component side Contact function Colour Rotating angle Key removal position Order no. momentary charcoal grey 1 x 40 0 3.13.026.041/0000 momentary light grey 1 x 40 0 3.13.026.541/0000 latching charcoal grey 1 x 90 0 3.13.026.001/0000 latching light grey 1 x 90 0 3.13.026.501/0000 latching charcoal grey 1 x 90 0+1 3.13.026.006/0000 latching light grey 1 x 90 0+1 3.13.026.506/0000 latching charcoal grey 2 x 90 0 3.13.026.011/0000 latching light grey 2 x 90 0 3.13.026.511/0000 latching charcoal grey 2 x 90 0+1+2 3.13.026.016/0000 latching light grey 2 x 90 0+1+2 3.13.026.516/0000 latching charcoal grey 2 x 90 0 3.13.026.601/0000 latching light grey 2 x 90 0 3.13.026.851/0000 latching charcoal grey 2 x 90 0+1+3 3.13.026.606/0000 latching light grey 2 x 90 0+1+3 3.13.026.856/0000 latching charcoal grey 3 x 90 0 3.13.026.021/0000 latching light grey 3 x 90 0 3.13.026.521/0000 latching charcoal grey 3 x 90 0+1+2+3 3.13.026.026/0000 latching light grey 3 x 90 0+1+2+3 3.13.026.526/0000 latching charcoal grey 4 x 90 without stop 0 3.13.026.031/0000 latching light grey 4 x 90 without stop 0 3.13.026.531/0000 latching charcoal grey 4 x 90 without stop 0+1+2+3 3.13.026.036/0000 latching light grey 4 x 90 without stop 0+1+2+3 3.13.026.536/0000 Technical data see page 4 - 154 2 keys included. Other lock variants available on request. Key Switches 4 - 156 Stock items are marked by bold printed order numbers. PCB Keyswitches Keylock and rotary switches for PCB EUROLOCKS - Keylock switch IP54 Pict.: light grey PCB hole pattern, component side Technical Data General information Colour Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system 4 Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Symmetric key Group key Key removal position General key soldering tin-plated cross contact self cleaning latching Au alloy no Eurolocks 5 801 50 no yes no see order block no Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials 0.04 ... 0.10 Nm 2 Nm 500 V 1W 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 UL 94 HB Typical accessories EUROLOCKS - Keylock switch IP54 Description Key Switches Photo Order no. O-ring for keylock switch Additional accessories see page 5 - 25 5.30.120.015/0100 Spare key (delivery content 1 key) 5.58.006.801/0000 4 - 158 Stock items are marked by bold printed order numbers. PCB Keyswitches Keylock and rotary switches for PCB EUROLOCKS - Keylock switch IP54 Pict.: light grey PCB hole pattern, component side Contact function Colour Rotating angle Key removal position Order no. latching charcoal grey 1 x 90 0 3.13.009.001/0000 latching light grey 1 x 90 0 3.13.009.006/0000 latching charcoal grey 1 x 90 0+1 3.13.009.031/0000 latching light grey 1 x 90 0+1 3.13.009.036/0000 Technical data see page 4 - 158 2 keys included. Other lock variants available on request. For the switching arrangement, refer to Micromec keylock switch IP54. 4 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 159 Key Switches Keylock and rotary switches for PCB Priority keylock switch IP54 Pict.: light grey PCB hole pattern, component side General Data Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. Technical Data 4 General information Colour Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 19.5 mm Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability Lock Wafers Lock type Number of locking positions Main key Symmetric key Group key Key removal position General key soldering tin-plated cross contact self cleaning see order block Au alloy no Micromec 5 001 500 yes no yes see order block yes Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max. Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials 0.04 ... 0.10 Nm 2 Nm 500 V 1W 2 ... 35 V 100 mA 100 mE 200 mE 109 E 8 kV see order block 10,000 IP54 -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 UL 94 HB Typical accessories Priority keylock switch IP54 Description Photo O-ring for keylock switch Key Switches 4 - 160 Stock items are marked by bold printed order numbers. Order no. Additional accessories see page 5 - 25 5.30.120.015/0100 PCB Keyswitches Keylock and rotary switches for PCB Typical accessories Priority keylock switch IP54 Description Photo Order no. Set of keys for 2 x 90 type (2 keys) 5.58.099.012/0000 Set of keys for 3 x 90 type (3 keys) 5.58.099.013/0000 Additional accessories see page Priority keylock switch IP54 Pict.: charcoal grey PCB hole pattern, component side Contact function Colour Rotating angle Key removal position Order no. latching charcoal grey 2 x 90 0 3.13.027.001/0000 latching light grey 2 x 90 0 3.13.027.501/0000 latching charcoal grey 2 x 90 0+1+2 3.13.027.006/0000 latching light grey 2 x 90 0+1+2 3.13.027.506/0000 latching charcoal grey 3 x 90 0 3.13.027.011/0000 latching light grey 3 x 90 0 3.13.027.511/0000 latching charcoal grey 3 x 90 0+1+2+3 3.13.027.016/0000 latching light grey 3 x 90 0+1+2+3 3.13.027.516/0000 4 Technical data see page 4 - 160 2 sets of keys included. Other lock variants available on request. For the switching arrangement, see IP54 Micromec keylock switch. Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 161 Key Switches Keylock and rotary switches for PCB Rotary switch IP40 Pict.: charcoal grey PCB hole pattern, component side Technical Data General information Colour Form of collar see order block square Dimensions Length of collar Width of collar Overall height 19 mm 19 mm 24 mm Mechanical design Mounting Terminals Contact system 4 Key Switches Contact function Contact materials Illuminability soldering tin-plated cross contact self cleaning see order block Au alloy no Mechanical characteristics Torque against stop min. Dielectric strength AC min. Rated power max. 0.45 Nm see order block 1W 4 - 162 Electrical characteristics Rated voltage max. Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Other specifications Rotating angle Operating life Degree of protection from front side Ambient temp. operating min. Ambient temp. operating max. Storage temperature min. Storage temperature max. Environmental restistance Flammability of materials 35 V 100 mA 100 mE 200 mE 109 E 8 kV see order block 50,000 IP40 -25 C +70 C -40 C +80 C acc. to IEC 60068-2 -14, -30, -33 and -78 UL 94 HB PCB Keyswitches Keylock and rotary switches for PCB Rotary switch IP40 Pict.: charcoal grey PCB hole pattern, component side Contact function Colour Rotating angle Order no. latching charcoal grey 1 x 90 3.13.007.001/0152 latching charcoal grey 2 x 90 3.13.007.011/0152 latching charcoal grey 3 x 90 3.13.007.021/0152 latching charcoal grey 4 x 90 3.13.007.031/0152 Technical data see page 4 - 162 Other colour variants available on request 4 PCB Keyswitches Stock items are marked by bold printed order numbers. 4 - 163 Key Switches