COUPLERS FEATURES * High directivity through phase velocity compensation * Stripline and microstrip couplers available * Lowest insertion loss C IN OUT MITEQ offers a variety of single and multisection microstrip and stripline couplers featuring a wide range of coupling values and bandwidths. MITEQ can offer microstrip couplers that incorporate compensation to enhance directivity by as much as 15 dB. Model Number Frequency Range (GHz) Coupling (dB) Insertion Loss (dB, Max.) VSWR In (Max.) VSWR Out (Max.) VSWR Coupled (Max.) Outline NARROWBAND COUPLERS 125471 131009-70058 6.3-6.9 15.4-19.8 124788-19.328 124788-29.1 125955 19.3-19.5 29-29.2 30 20 Out 1 = 20 Out 2 = 6 20 20 20 1.3 3 1.6:1 1.6:1 1.6:1 1.6:1 1.8:1 2:1 See below Contact factory 1.3 1.3 1.5 1.8:1 1.8:1 1.8:1 1.8:1 1.8:1 1.8:1 1.9:1 1.9:1 2:1 See below See below See below Additional frequency ranges and coupling values are available. Consult factory for options. ENVIRONMENTAL CONDITIONS Operating temperature . . . . . . . . . . . . . . . . 0 to 70C Storage temperature . . . . . . . . . . . . . . . . . . -30 to +85C Power handling . . . . . . . . . . . . . . . . . . . . . . Pin maximum equals 20 W into 1.2:1 load, all ports. OUTLINE DRAWING TYPE "SMA" FEMALE CONNECTOR TYP. (3) PLACES 0.25 [6.35] 0.104 [2.64] DIA. THRU TYP. (2) PLACES C 0.50 [12.7] IN OUT 0.23 [5.84] TYP. 0.41 [10.41] 0.370 [9.40] TYP. 0.344 [8.74] 1.16 [29.46] 0.185 [4.70] TYP. (3) HOLES 0.09 [2.29] 0.37 [9.40] GENERAL NOTES: 1. Dimensions shown in brackets [ ] are in millimeters. 2. Tolerance as follows: .xx = 0.01 [.xx = 0.25], .xxx = 0.005 [.xxx = 0.13] 22 COUPLERS TEL: (631) 439-9137 FAX: (631) 436-9219 DATE E-MAIL: jpierro@miteq.com COMPANY ADDRESS CONTACT TEL. FAX E-MAIL For additional technical, price and delivery information, please copy, complete and mail or fax this form to (631) 4369219, or call John Pierro at (631) 439-9137. SPECIFICATION PARAMETER REQUIREMENT 1 REQUIREMENT 2 REQUIREMENT 3 Frequency range (GHz) Coupling (dB) Insertion loss (dB, maximum) Input/output VSWR (maximum) Operating temperature Quantity Special requirements, such as special testing/screening, or specific operating environment may be listed below: PLEASE SEND ADDITIONAL INFORMATION ON THE FOLLOWING MITEQ PRODUCTS: Amplifiers Mixers Multipliers Frequency Sources 55 Passive Power Components IF Signal Processing Components Integrated Assemblies SATCOM Products 100 Davids Drive, Hauppauge, NY 11788 TEL.: (631) 436-7400 * FAX: (631) 436-9219/436-7430 www.miteq.com