509
Pigtailed PIN Photodiodes
Technical Data
PDT1X4X
Description
The PDT range of products
includes a variety of compact
fiber pigtailed devices designed
for wide operating temperature,
low cost applications such as
fiber in the loop. The planar
InGaAs photodiodes are manufac-
tured using MOVPE growth tech-
nology and give low leakage and
high responsivity performance
with excellent reliability.
The construction of the devices
includes a hermetically sealed
photodiode and an actively
aligned fiber pigtail and is
designed to be compatible with
the environmental requirements
of the Bellcore TA-TSY-000983
document.
Features
• Variety of Flange/Pinout
Options
• Fiber Pigtail Options
• Compact Package
• High Reliability Planar
InGaAs PIN Photodiode
• High Responsivity
Applications
• Instrumentation
• O-E Converters
• Single and Multimode Fiber
Communications Systems
• Data Communications
Receivers
• FDDI
The product range includes a
variety of pinout, fiber type and
package mounting bracket
options, designed to match the
majority of offerings in the
marketplace. If the specific
arrangement or performance you
require is not listed, please
contact Hewlett-Packard. Highly
flexible design and manufacturing
processes allow both physical and
electro-optic customization to
suit your needs.
5963-3401E (11/94)
510
PDT Pigtailed Photodiode Specifications
Absolute Maximum Ratings
Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short
periods, provided each limiting parameter is in isolation and all other parameters have values within the performance
specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same
time.
Parameter Symbol Minimum Maximum Units
Reverse Voltage Vr-20V
Reverse Current Ir-1mA
Forward Voltage Vf-1V
Forward Current If-5mA
Power Dissipation - - 50 mW
Operating Temperature Tc-40 85 °C
Storage Temperature Ts-40 85 °C
Soldering - 10 seconds - - 260 °C
Fiber Pull - - 10 N
Performance Specification
Test Conditions:
Unless Otherwise
Stated PDT134X PDT144X
Parameter Symbol Vr = 5 V, Tc = 25°CMin. Max. Min. Max. Units
Dark Current Id-1-1nA
T
c
= 85°C-50-50nA
Reverse Breakdown Voltage Vbr Ir = 10 µA35-35-V
Capacitance C 1 Mhz - 1.1 - 1.7 pF
Responsivity R λ = 1300 nm 0.7 - 0.7 - A/W
Operating Wavelength λ80% points 1200 1650 1200 1650 nM
Small Signal Bandwidth Bw 3 - 1.5 - GHz
Rise/Fall Times τr/τf- 0.25 - 0.5 nS
Fiber Pigtail: Tight jacketed, self-mode stripping, multimode fiber
Parameter Minimum Maximum Units
Length 1.0 - m
Core Diameter 47 53 µm
Cladding Diameter 122 128 µm
Concentricity Error - 8 %
Secondary Jacket Diameter 0.8 1.0 mm
511
PDT Mechanical Outline Options
PDT1X4X-A
PDT1X4X-B
BL
M
H
G
E
C
A
D
KN
F
DIM. MIN. MAX.
A
B
C
D
E
F
12.0
0.41
1000
25.0
19.5
9.5
0.47
DIM.
G
H
J
K
L
M
N
MIN.
2.54 NOM.
13.35
2.1
MAX.
9.5
2.4
2.0
13.55
2.4
6.25
ALL DIMENSIONS IN MILLIMETERS
B
G
E
C
A
D F
DIM. MIN. MAX.
A
B
C
D
E
F
G
12.0
0.41
1000
2.54 NOM.
25.0
6.25
8.5
0.47
ALL DIMENSIONS IN MILLIMETERS
512
PDT Mechanical Outline Options
PDT1X4X-D
PDT Electrical Pin-Outs
1
PIN 1: CATHODE + ve
PIN 2: ANODE – ve
PIN 3: CASE
23
PDT1X41
21
1
PIN 1: ANODE – ve
PIN 2: CATHODE + ve
PIN 3: CASE
23
PDT1X42
12
1
PIN 1: CATHODE + ve
PIN 2: CASE
PIN 3: ANODE – ve
23
PDT1X46
31
1
PIN 1: ANODE – ve
PIN 2: CATHODE + ve
PIN 3: CASE
23
PDT1X47
12
F
HL
J
N
E
C
A
D
M
B
G
DIM. MIN. MAX.
A
B
C
D
E
F
G
12.0
0.41
1000
25.0
6.25
9.5
0.47
18.0
DIM.
H
J
K
L
M
N
P
MIN.
12.7 NOM.
0.9
3.8
2.54 NOM.
2.1
MAX.
7.5
1.1
7.5
4.2
2.4
ALL DIMENSIONS IN MILLIMETERS
P
K
513
Ordering Information
PDT1 X 4 X-X X-X X
Connector Type:
FP = FC/PC
ST = ST®
BI = Biconic
SC = SC
DN = DIN
D4 = D4
SF = Super Polish FC/PC
TO to Mount Connection:
I = Isolated (Default if not specified)
S = Shorted
Flange Type:
A = 2 hole panel mount, 13.4 mm between centers
B = Barrel
D = 2 hole PCB mount, 12.7 mm between centers
G = 2 hole PCB mount, 14.0 mm between centers
Pin Out:
Options shown on Page 4
Device Type:
3 = 50 µm Photodiode
4 = 90 µm Photodiode
Fiber Type:
1 = 50/125 Fiber
Options available for single mode and 62.5/125 fibers
Preferred Options:
PDT1346-DI
PDT1441-DI
PDT1442-AS
PDT1442-BI
PDT1442-DI
PDT1446-DI
Additional options are available to meet your specific needs. Please contact your local representative for
details.
ST® is a Registered Trademark of AT&T.