This page of product is RoHS compliant. RF Digital manufactures an extensive line of fully integrated, low cost, high quality, high performance, configurable Wireless RF Transmitter, Receiver & Transceiver Modules, suitable for nearly every type of application. RFDUINO BLUETOOTH ARM CORTEX M0 DEVELOPMENT TOOLS RF Digital RFduino Bluetooth ARM Cortex M0 Development Board delivers an Arduino compatible Development Kit with integrated Bluetooth 4.0 BLE all in a finger-tip sized board. The RFduino is compatible with Bluetooth 4.0 compatible smartphones and computers, allowing it to be wirelessly controlled through apps written by the end user or downloaded from RF digital. A USB shield is available to allow easy programming of the RFduino, and a variety of other shields include the RGB LED/Button shield, Servo shield, Prototyping shield, Relay shield, MicroSD shield, and a variety of battery shields for remotely powering the RFduino. 975-RFD90104 975-RFD90105 975-RFD22102 975-RFD22301 975-RFD22121 975-RFD22122 975-RFD22123 975-RFD22124 975-RFD22125 975-RFD22126 975-RFD22127 975-RFD22128 975-RFD22130 975-RFD22131 RF Digital Description Part No. RFD90101 Development Kit - Includes RFduino DIP and USB Shield RFD90102 Development Kit - Includes RFduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, Prototyping Shield, and Dual AAA Battery Shield RFD90103 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery Shields, CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield RFD90104 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery Shields, CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield RFD90105 Development Kit - Includes Rfduino DIP, USB Shield, RGB LED/Button Shield, Servo Shield, PCB USB Shield, Prototyping Shield, Single and Dual AAA Battery Shields, CR2032 Battery Shield, Micro SD Shield and Dual Relay Shield RFD22102 Development Platform - Bluetooth 4.0 Low Energy BLE RF Module with Built-in ARM Cortex M0 Microcontroller for Rapid Development and Prototyping Projects RFD22301 Bluetooth 4.0 Low Energy BLE RF Module With Built-In ARM Cortex M0 Microcontroller RFD22121 USB Programming Shield Board RFD22122 RGB LED/Pushbutton Shield - 2 Button Inputs with 10k Resistor Pull Downs and it also has an RGB LED with Series LEDs RFD22123 Servo Shield - Drive up to 4 Servos and has a Dual Supply Input RFD22124 PCB USB Shield Board RFD22125 Proto Shield - Provides Access to the 3V Supply Rail and Ground RFD22126 Dual AAA Battery Shield RFD22127 Single AAA Battery Shield RFD22128 CR2032 Coin Battery Shield RFD22130 MicroSD Shield - Allows Easy Use of MicroSD for Access to Gigabytes of External Memory RFD22131 Dual Relay Shield - Provides Two SPDT, Independently Controlled Relays Price Each 42.65 119.99 219.99 299.99 499.99 25.99 17.99 25.99 13.99 16.99 24.99 9.99 21.99 21.99 16.99 15.85 27.99 2.4 GHZ SERIAL TRANSCEIVERS Complete Compliance Approved & Certified, READY-TO-USE, 2.4 GHz wireless solution with built-in RFDP8 interference-tolerant user application protocol. Includes RFID, 32 Bit ESN, Logic Switch Transmitter / Receiver, 9600-8N1 Serial UART Transceiver and many easy-to-use addressable network modes. No development required at all, no RF layout, no code writing, all features are built-in. Be up and running with a wireless solution in minutes. The RFDANT's Revolutionary Patent Pending design enables it to reach distances of 2,000 feet, while still being an Ultra Low Power device. This huge range is reached without any power amplifiers at all, it's unique design is responsible for it reaching these great distances without any extra battery drain or extra power. The RFDANT makes it easy for you to satisfy GREEN directives due to its unique design and ultra high performance. The RFDANT fits in the palm of your hand and looks like an Antenna, but of course it is much more since it is the whole radio and processing system in one unit. There are no RF cables at all, simply connect +V, GND, and a few logic signal wires based on your application and you are done. There is no need for PCB layout either. You can directly connect to the 11 pin, 8 inch cable extending out of the bottom of the RFDANT. Features: * Ultra small 15mm x 15mm footprint * Fully contained, truly finished, ready to use module * CE/ETSI/IC & FCC Certified and Approved * Typical range: 500ft (150m) * 2uA ultra low power modes * Only 14mA current consumption at 0dbm TX and 17mA at RX * Runs on a single coin cell for years * WiFi interference tolerant * Heavy 2.4GHz noise and interference tolerant * No external parts required * No RF layout required * Easy and ready-to-use, hand-held, eval and application boards available MOUSER STOCK NO. RF Digital Part No. Description 8 Pin Header SMT SMT SMT Outdoor Range (ft) 300 500 500 500 SMT SMT 300 3000 Package 975-RFD21712 975-RFD21731 975-RFD21732 975-RFD21733 RFD21712 nRF24L01P PCB Antenna RF Module RFD21731 nRF24LE1 Transceiver RF Module, on-board chip antenna RFD21732 nRF24LE1 Transceiver RF Module on-board chip antenna (Includes 32 KHz Crystal) RFD21733 nRF24LE1 Transceiver RF Module with built in RFDP8 8-mode protocol. Includes on-board chip antenna 975-RFD21734 RFD21734 nRF24LE1 Transceiver RF Module for use with external antenna (Includes 32 KHz Crystal) 975-RFD21735 RFD21735 nRF24LE1 Transceiver RF Module with built in RFDP8 8-mode protocol, for use with external antenna Dimensions (LxWxH) (mm) 15 x 34 x 5.6 15 x 15 x 3.5 15 x 15 x 3.5 15 x 15 x 3.5 Price Each 1 16.41 14.99 19.08 14.99 10 15.93 14.55 18.63 14.55 25 15.21 13.89 17.26 13.89 50 14.33 13.09 16.26 13.09 15 x 15 x 3.5 21.15 20.66 19.14 18.03 15 x 15 x 3.5 14.99 14.55 13.89 13.09 EVALUATION BOARD MOUSER RF Digital STOCK NO. Part No. 975-RFD21737 RFD21737 Price Each 74.99 Description RFD21737 Evaluation Board with a mounted RFD21733 Module and a built in chip antenna KEY FOB TRANSMITTERS 1 Button 2 Buttons 3 Buttons 1 1 1 2 3 1 2 2 3 3 MOUSER STOCK NO. 975-RFD21781 975-RFD21782 975-RFD21783 975-RFD21793 RF Digital Part No. RFD21781 RFD21782 RFD21783 RFD21793 3 Description KEYFOB Transmitter with built in RFDP8 Application Protocol, 1 Button, 2.4 GHz CE, IC, FCC Approved KEYFOB Transmitter with built in RFDP8 Application Protocol, 2 Button, 2.4 GHz CE, IC, FCC Approved KEYFOB Transmitter with built in RFDP8 Application Protocol, 3 Button, 2.4 GHz CE, IC, FCC Approved KEYFOB Transmitter with built in RFDP8 Application Protocol, Active RFID Tag, 3 Button 1 63.55 63.55 63.55 62.52 Price Each 10 25 60.38 57.15 60.38 57.15 60.38 57.15 59.39 56.21 50 54.02 54.02 54.02 53.14 ACCESSORIES MOUSER STOCK NO. RF Digital Part No. 975-RFD21807 RFD21807 975-RFD21813 RFD21813 975-RFD21815 RFD21815 (c) Copyright 2016 Mouser Electronics mouser.com/rfdigital Description Price Each 2.4 GHz RFDP8 USB Dongle based on FTDI USB IC and RFD21733 Stand Alone Prototyping RF Module based on the RFD21733 - DIP Package Open Source Wireless Inventors Shield for Arduino based on the RFD21733 74.99 26.65 34.99 (800) 346-6873 (c) Copyright 2016 Mouser Electronics 31 RF Digital MOUSER STOCK NO. 975-RFD90101 975-RFD90102 975-RFD90103 Wireless Solutions RF DIGITAL Wireless Modules and Kits