Search: SmartHeat(R) Hand Soldering Go! metcal > products > Hand Soldering > mx rework systems >Micro fine tips SMT Rework Desoldering BGA Rework CSP Rework Fume Extraction Fluid Dispensing Terms & Conditions MX Rework Systems More Information... Microfine Rework Tip The Microfine rework tip cartridge series is designed for reworking 0201 and 0402 or microfine components in tight spaces with the help of a microscope. This series includes tips that can be used to remove 0402 and 0201 components from the topside approach or can also be used for multi-lead drag soldering on micro PLCC and QFP components with access problems. Depending on your SMTC-X171 Use to remove 0201 and 0402 components from a "topside" angle. This design increases microscope viewing when reworking/removing micro chip capacitors/ components. SMTC-X172 Designed for fine drag soldering and pointto-point soldering. This tip increases access between components and allows for lead to lead or solder bridge clean-up. SMTC-X174 Long reach micro hoof tip designed with a smaller surface area than the mini-hoof for optimal drag soldering of components in tight spots. SMTC-X175 Micro-hoof tip designed with a smaller surface area than the mini- hoof for drag soldering of small/micro leaded components. STTC-X90 Microfine tip designed for soldering and touch-up of micro components such as 0201s and 0402s. 500 series x=5 600 series x=0 700 series x=1 800 series x=8 Top copyright (c) 2000 ok international. please read our privacy statement. Search: Go!