Amphenol
Amphenol-Tuchel Electronics GmbH
Connectors
Series C 148U
2
The Company
Amphenol-Tuchel Electronics GmbH is a global
company and a leading manufacturer of electri-
cal connector solutions.
The superior quality of our product line is a
result of state of the art engineering and tech-
nology in conjunction with leading edge pro-
duction methods.
Our worldwide production and sales channels
provide local competence in a global market-
place.
Amphenol has set standards in electrical
connector technology with many inventions
and patents. These solutions are appreciated
features in product applications such as
industrial machine tool, automotive, telecom as
well as datacom markets.
Worldwide Performan
The connectors of the Amphenol product series
C 148 U are characterised by a robust and
compact design, simple handling, and high
mechanical and electrical strength. These con-
nectors, designed for use in control systems
and servo-drives, thus meet all requirements
demanded of a decentralised plug-connector
system for use under rough operating condi-
tions. They are suitable for wire sizes of
0.5 mm2to 10 mm2and cover about 95% of
all possible applications.
The modular usability of the individual compo-
nents reduces the amount of stock which has
to be kept. A further advantage is the simple,
quick and reliable assembly of connectors for
equipment and cables. No special tools are
needed for inserting the contacts into the insu-
lated body.
The proven crimp technology is very suitable for
connecting wires to contacts for systems sub-
ject to vibration stresses. All of the connectors
are designed for use in electromagnetic interfer-
ence fields. The EMI protection is ensured by
the metallic construction and the full connection
of the cable shield within the connectors.
The application sector for the C 148 U series
extends from mechanical engineering to drive
solutions and decentralised control systems
with power buses.
System
description
nce
3
Right angled and straight connectors
Robust metal construction
Meets IP 65 and IP 67 specifications
Locking levers coupling
Number of contacts 3 + PE (power contacts)
+ 3 (signal contacts)
630 V rated voltage
60 A rated current at TU40°C
Cable strain relief with cable clamp
Cable dia. 8 - 23 mm
EMI protected in mated and locked condition
Crimp termination
Excellent cost/value ratio
•Premating earth contact
Cable and panel connector connected with premating
earth conctact
Main features
4
C 148 U Technical Data
General Characteristics Standard Value
No. of contacts 3 + 3 + PE
Termination crimp
Wire size power contacts 1.5 - 10 mm2;16 - 8 AWG
Wire size signal contacts 0.5 - 1.5 mm2;20 -16 AWG
Coupling Locking levers
Flammability UL 94 V-0
Electrical Characteristics
Rated voltage IEC 60 664-1 630 V AC/DC (500 V AC/DC signal contacts)
Rated impulse voltage IEC 60 664-1 6.0 KV
Material group IEC 60 664-1 II
Contact resistance IEC 60 512-2, Test 2 a 3 m(5 msignal contacts)
Insulation resistance IEC 60 512-2, Test 3 a 108
Current carrying capacity (power contacts) IEC 60 512-3, Test 5 b approx. 60 A (see derating curves)
Current carrying capacity (signal contacts) IEC 60 512-3, Test 5 b 5 A
Climatic Conditions Contact Inserts Housing
Climatic category IEC 60 068-1 25 / 125 / 21 25 / 100 / 21
Lower temperature limit IEC 60 512-6, Test 11 j -25 °C / 16 h -25 °C / 16 h
Upper temperature limit IEC 60 512-6, Test 11 i +125 °C / 1000 h +100 °C / 1000 h
Mechanical Characteristics
Insertion and withdrawed forces IEC 60 512-7, Test 13 b 30 N
Mechanical life cycle IEC 60 512-5, Test 9 a 100 mating cycles
Locking force IEC 60 512-7, Test 13 a 150 N
Protection class IEC 60 529 IP 65 / IP 67
Materials
Contact insert PA 6.6
Contacts Cu-alloy
Contact plating Ag
Housing Zn die cast
Housing plating Ni
Technical data refer to connectors in mated and locked condition.
0102030405060708090100110 120 130
0
10
20
30
40
50
60
70
80
I [A]
TA contacts [°C]
1
2
3
4
5
C 148 U Derating curves power contacts
110mm
2
26mm
2
34mm
2
42.5mm
2
51.5mm
2
Contact carrying capacity at:
- temperature of motor casing approx. 110 °C
- ambient temperature approx. 40 °C
5
C 148 U Panel Connectors
53
53
4823
MONTAGEAUSSCHNITT
PANEL CUT - OUT
38
M4 a
43
43
MONTAGEAUSSCHNITT
PANEL CUT - OUT
38
M4 alt. M5
43
43
Description Part No.
Angled housing M5 C148 G20 000 G1
Straight housing C148 10F001 000 1
Male contact insert C148 10A006 000 1
Angled housing M4 upon request
Each packaging contains 25 pieces.
Panel connectors for male
contact inserts, for wire sizes
0.5 - 10 mm2, 20 - 8 AWG.
The straight panel connector
housing can also be used
without the angled housing.
For contacts see page 7.
Assembly Instruction
Refer also page 8,
Assembly + Termination
4,5 alt. 5,5
15,5
68,5
51
43
M5
43
43
51
43 43
60
43
60
42
MONTAGEAUSSCHNITT
PANEL CUT - OUT
M4
20,5
35,5
U1
V1
W1
PE
3
45
6
C 148 U Cable Connectors
43,5
41ca. 82,5
Description ø Cable Part No.
Female cable connector 8 - 14 mm C148 10G006 200 1
Female cable connector 14 - 17 mm C148 10G006 201 1
Female cable connector 17 - 20 mm C148 10G006 202 1
Female cable connector 20 - 23 mm C148 10G006 203 1
Female contact insert C148 10B006 000 1
Each packaging contains 25 pieces.
26
35
PE
3
54
U1
V1
W1
Cable connectors for
female contact inserts,
for cable diameter
8 - 23 mm and wire sizes
0.5 - 10mm2, 20 - 8 AWG.
For contacts see page 7.
PE
C
BA
A
Tightening torque
9,5 to 10 Nm
ca.5
1. 2.
4,5
10
15
PE
Tightening torque
2,5 to 2,8 Nm
4.3. C
BD
D
a
b
(a+3 mm)
Assembly Instruction
Refer also page 8,
Assembly + Termination
ø Cable a b
Power wire Signal wire
8 - 17 mm 43 mm 54 mm
17 - 23 mm 52 mm 63 mm
C 148 U Tur ned Crimp Contacts
A
33,1
Description Wire size AWG A Quantity Part No.
in mm
2
in mm
Male contact 1.5 16 1.75 100 VN 01 036 0008 (1)
2.5 14 2.25 100 VN 01 036 0009 (1)
4122.85 100 VN 01 036 0010 (1)
6103.5 100 VN 01 036 0011 (1)
10 8 4.4 100 VN 01 036 0014 (1)
Female contact 1.5 16 1.75 100 VN 02 036 0007 (1)
2.5 14 2.25 100 VN 02 036 0008 (1)
4122.85 100 VN 02 036 0009 (1)
6103.5 100 VN 02 036 0010 (1)
10 8 4.4 100 VN 02 036 0013 (1)
Crimping tools
4-Ident hand crimping tool TB 0002
Contact locator TB 0000 146 0007
Calibration pin set TP 0000 146 1200
C 148 U Stamped Crimp Contacts
3
25
3
1,6
26,7
11
4
2,5
4
11
Description Wire size Supplied Quantity Part No. Crimping tool Part No.
in mm
2
as Contacts Crimping tools
Hand crimping tool TA 0000
Male contact 0.5 - 1.5 single contact 100 VN 01 016 0002 (1) Crimping dies TA 0000 163
20-16 AWG Contact locator TA 0002 146 0001
single contact 200 ZN 01 016 0002 (1) Hand crimping tool FA 0000 110
Crimping dies FA 0000 163
contacts on reel 2000 HN 01 016 0002 (1) Semi automated
crimping tool upon request
Hand crimping tool TA 0000
Female contact 0.5 - 1.5 single contact 100 VN 02 016 0002 (1) Crimping dies TA 0000 163
20-16 AWG Contact locator TA 0002 146 0001
contacts on reel 200 ZN 02 016 0002 (1) Hand crimping tool FA 0000 110
Crimping dies FA 0000 163
contacts on reel 2000 HN 02 016 0002 (1) Semi automated
crimping tool upon request
Removal tool for all stamped crimp contacts FG 0300 146 1
Turned crimp contacts
for ø 3.6mm
Stamped crimp
contacts
for ø 1.6mm
7
1. General Remarks
The connectors of the C 148 U series are designed to meet the
high demands of industrial applications under harsh environmental
conditions. The connectors are designed and built in accordance with
DIN VDE 0627. We reserve the right to change the design due to
improvements in quality, product developments, or production
requirements.
All technical details refer to connectors, which according to the
regulated uses should not be mated or seperated when electrical
voltage is applied. The data and instructions as listed are to help the
user select the correct product and to ascertain correct and matched
applications.
2. Application
Connectors must only be used according to the specified calculated
dimensions. Please note that calculated quantities are frequently only
shown as initial values which have been determined under special
test conditions and are subject to change especially under longer
terms or different forces. The connectors of the C 148 U series are
designed for applications in the equipment and machine tool industry
as well as for instrumentation. Selection and testing of connectors
and/or plug and panel devices are designed to meet specific product
or industrial requirements, such as calculated voltage and the related
clearances and creepage distances.
It is the responsibility of the user to check whether the connection
differs to the specified requirements and therefore to judge whether
the application is suitable.
All calculated data for the connnectors listed in this catalog are based
on overload category III and contamination level 3 (for machine tool
applications). In the applications be sure the connectors are com-
pletely mated according to their respective safety locking
mechanism. All technical data refer to mated connectors under
locked conditions.
4. Termination
Cable connectors are effectively secured when using the internal
cable clamp. When the connector contains a simple gland bushing
for retention, the cable should have a strain relief close behind the
connector. All cable properties or specifications must be compatible
with the connector design and materials. Designated wire conductors
must be soldered to the correct positions. Crimped contacts must be
terminated with the specified tools of the manufacturer.
Contacts must be fully inserted into the plastic housing and retention
assured with a slight tug on the wire. Wire should be stripped
correctly according to printed specifications to insure no electrical
contact can be made between the conductors. There should be no
cut strands during the stripping action.
7. EMI
The specified requirements according to the EMI-Law (EMI-Directive
89/336EWG) must be ensured by corresponding installation in the
equipment.
8
3. Assembly
Certain appliances and equipment include protective measures that
relate to the coupling devices of the male and female receptacle
housings.
Care must be taken to ensure the parts are correctly mated and
screws are tightened with the proper torque.
In order to stop the loosening of the screw, we recommend the use
of washers or screws which are supplied with a suitable secure glue.
In regards to the screwing together of angled housings and straight
housings, we recommend our screws N 03 040 0022 (1), and to
the screwing on of the angled housings screws with a suitable
surface coating can be used, e.g. see DIN 912 or DIN 7985 (strength
level 8.8).
Tightening torque
2,5 to 2,8 Nm
Tightening torque
9,5 to 10 Nm
a
PE
1.
4,5
10
15
b
A
ca.5
2.
C
BD
AD
C
PE 3.
BA
C
B
4.
(a+3 mm)
9
C 148 U Cable Connectors
ca. 85
55
44
Description ø Cable Part No.
Male cable connector 8 - 14 mm C148 10G006 400 1
Male cable connector 14 - 17 mm C148 10G006 401 1
Male cable connector 17 - 20 mm C148 10G006 402 1
Male cable connector 20 - 23 mm C148 10G006 403 1
Male contact insert C148 10A006 000 1
Each packaging contains 25 pieces.
20,5
35,5
U1
V1
W1
PE
3
45
Cable connectors for
male contact inserts,
for cable diameters
8 - 23 mm and wire sizes
0.5 - 10mm2, 20 - 8 AWG.
For contacts see page 7.
ø Cable a b
Power wire Signal wire
8 - 17 mm 41 mm 52 mm
17 - 23 mm 50 mm 61 mm
Assembly Instruction
Refer also page 8,
Assembly + Termination
International
Argentina
Amphenol Argentina
Av. Callao 930
2nd Floor Office B “Plaza“
C1023 AAP Buenos Aires
Phone +54 /11/ 48153579
Fax +54 /11/ 48145779
Australia
Amphenol Australia Ltd.
2 Fiveways Blvd
Keysborough
Victoria 31 73
Phone +61 / 3 / 8796 / 8888
Fax +61 / 3 / 8796 / 8801
Brasilia
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132, 20th Floor
CEP 05423-010 Sao Paulo SP
Phone +55 / 11 / 3815.1003
Fax +55 / 11 / 3815.1629
France
Amphenol Socapex France
21 Chemin du Défois
B.P. 349
39105 Dole Cedex
Phone +33 / 3 / 84829400
Fax +33 / 3 / 84829411
Great Britain
Pyle-National
A division of Amphenol Ltd.
Unit D1, Crossgate Drive
Queens Drive
Industrial Estate
Nottingham, NG2 1LW
Phone: +44 / 115 / 9866200
Fax +44 / 115 / 9866212
Hongkong
Amphenol East Asia Limited
Units 2201-02, Railway Plaza
39 Chatham Road South
Tsimshatsui, Kowloon
Phone +852 / 2699 / 2663
Fax +852 / 2688 / 0974
India
Amphetronix Limited
Plot No.105 Bhosari Industrial Area
Pune - 411 026
Phone +91 / 20 / 7121418
Fax +91 / 20 / 7120581
Sweden
Amphenol Scandinavia
Johanneslundsvägen 2
19461 Upplands Väsby
Phone +46 / 8 / 59410440
Fax +46 / 8 / 59033800
Spain
Amphenol Ibérica
C/Comunidad de Madrid, 35-bis
oficina N° 55 “Edificio Burgosol“
E-28230 las Rozas Madrid
Phone +34 / 916407302
Fax +34 / 629054629
South Africa
Amphenol International Ltd
Chislehurston
30 Impala Road
Chislehurston
Sandton, 2146
Phone +27 / 11 / 7839517
Fax +27 / 11 / 7839519
Taiwan
Amphenol East Asia Ltd.
Taiwan Branch (H.K.)
116 Zhong Shan Road
Lane 956 Taoyuan City
Taiwan R.O.C. 330
Phone +886 / 3 / 370 / 7855
Fax +886 / 3 / 360 7259
USA
Amphenol-Tuchel Electronics
Representative Office
6900 Haggerty Road
Suite 200
Canton, Michigan 48187
Phone +1 / 734 / 451 6400
Fax +1 / 734 / 451 7197
Amphenol Corporation
Corporate Headquarters
358 Hall Avenue
Wallingford, CT 06492
Phone +1 / 203 / 265 / 8900
Fax +1 / 203 / 265 / 8628
Your engineering sales representives:
ATE 2140 B 0103 3000
Printed on chlorin-free bleached paper, specifications may be changed without notice.
Copyright 10/02 by Amphenol -Tuchel Electronics GmbH, Germany
Amphenol
Amphenol-Tuchel Ele ctronics GmbH
August-Haeusser-Str. 10 .D-74080 Heilbronn .Germany .Phone +49(0)7131/929-0 .Fax +49(0)7131/929 -486 · www.amphenol.info
Italy
Amphenol Italia S.p.A.
Via Barbaiana n. 5
l-20020 Lainate (MI)
Phone +39 / 2 / 93254.1
Fax +39 / 2 / 93254.445
Japan
Amphenol Japan, K.K.
2-3-27, Kudan Minami
Chiyoda-Ku
Tokyo 102
Phone +81/ 3 / 3263 / 5611
Fax +81/ 3 / 5276 / 7059
Korea
Amphenol DaeShin Limited
#802 Joong-Dong 1131- 5
Wonmi-Ku
Bucheon-City
Kyunggi-Do
Korea 420-020
Phone +82 / 2 / 785 / 1588
Fax +82 / 2 / 589 / 1514
Mexico
Amphenol Mexico
Prolongacion Reforma 61 - 6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F.
Phone +52 / 55 / 5258.9984
Fax +52 / 55 / 5081.6890
Netherlands
Amphenol Benelux b.v.
Hoofdveste 19
3992 AK Houten
Phone +31 / 30 / 6 358000
Fax +31 / 30 / 6 3778 99
Peoples Republic of China
Amphenol-Tuchel Electronics GmbH
China Branch
210-1 Taishan Road
Changzhou 213022
Phone +86 / 0519 / 5110301
Fax +86 / 0519 / 5110299
Singapore
Amphenol East Asia Limited
Asia Pacific Sales Operation
Singapore Branch
300 Beach Road
#25-07 The Concourse
Singapore 199555
Phone +27 / 11 / 305-9574
Fax +27 / 11 / 305-9576