MH105 Series Metal 'D' Tin & Dimple Connectors-IDC Features: * * * * * Tin and dimple shells Black insulators and IDC crimp back shell Selective gold / tin plated contacts Available with or without 4-40 UNC threads Design allows use with standard back shells Specifications: Electrical Working Current Test Voltage Insulation Resistance Contact Resistance Temperature Range : : : : : 1.5 A 1,000 V 5,000 M Less than 10 m -55C to +125C : : : : Glass filled polyester black Stamped steel tin plated Copper alloy 1.5 micron Tin and 0.2 micron gold Material Insulator Shell Contacts Contact Plating Dimension Table Ways A B 9 25 30.8 15 33.3 39.1 25 47 53 37 63.5 69.3 H = Height after crimping H2 = With strain relief C H H2 12.5 15.5 18.5 Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <1> 05/04/12 V1.1 MH105 Series Metal 'D' Tin & Dimple Connectors-IDC Specification Table Description Part Number 9 Way Plug - Unthreaded MH10551 15 Way Plug - Unthreaded MH10552 25 Way Plug - Unthreaded MH10553 37 Way Plug - Unthreaded MH10554 9 Way Socket - Unthreaded MH10575 15 Way Socket - Unthreaded MH10576 25 Way Socket - Unthreaded MH10577 37 Way Socket - Unthreaded MH10578 9 Way Plug - 4-40 UNC Threaded MH10567 15 Way Plug - 4-40 UNC Threaded MH10568 25 Way Plug - 4-40 UNC Threaded MH10569 37 Way Plug - 4-40 UNC Threaded MH10570 9 Way Socket - 4-40 UNC Threaded MH10591 15 Way Socket - 4-40 UNC Threaded MH10592 25 Way Socket - 4-40 UNC Threaded MH10593 37 Way Socket - 4-40 UNC Threaded MH10594 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 05/04/12 V1.1