www.amccaps.com MINI-SWITCH MODE(R) CAPACITORS AMC's Mini-Switch Mode(R) ceramic capacitors combine the advantages of high capacitance found in tantalum capacitors with very low ESR performance of ceramic capacitors. The "J" and "L" lead configurations replace 1825 and 2225 SMT chips to provide stress relief and prevent cracking due to thermal cycling or mechanical board flexing. Another plus of the J-lead style is that this configuration allows use of the same solder lands as the SMT chips. See the Switch-Mode section for larger values. See also the Technical Notes on soldering and handling and suggested solder lands. KEY FEATURES * Stress Relief from Cracking due to Thermal Cycling, TCE Mismatches or Board Flexing * 25 to 500 VDC Ratings * Custom Sizes, Voltages, and Values Available * Ideal for DC-DC Power Supply Applications CAPACITANCE SELECTION NPO Max Capacitance (uF) X7R Max Capacitance (uF) SIZE CODE EIA CHIP SIZE 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V P09 1825 0.056 0.047 0.039 0.027 0.018 1.5 1.2 0.75 0.56 0.27 P29 1825 0.11 0.094 0.078 0.054 0.036 3.0 2.4 1.5 1.1 0.54 P39 1825 0.16 0.14 0.11 0.081 0.054 4.5 3.6 2.2 1.6 0.81 P49 1825 0.22 0.18 0.15 0.10 0.07 6.0 4.8 3.0 2.2 1.0 P08 2225 0.068 0.056 0.047 0.033 0.027 2.7 2.2 1.5 1.2 0.39 P28 2225 0.13 0.11 0.094 0.066 0.054 5.4 4.4 3.0 2.4 0.78 P38 2225 0.20 0.16 0.14 0.10 0.081 8.1 6.6 4.5 3.6 1.1 P48 2225 0.27 0.22 0.18 0.13 0.10 10 8.8 6.0 4.8 1.5 Dielectric specifications may be found on page 16. Contact the factory for RoHS products. If you don't see it here, just ask. MADE in the USA 12 Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 * (716) 372-5225 * Fax (716) 372-5467 www.amccaps.com MECHANICAL CHARACTERISTICS Dimensions Applicable to all sizes: In. h .010 .070 L W mm L W L W 1.78 T W T T .100 2.54 p .015 .065 c Typ. 1.65 T h h h h c L p c P08 P09 P28 c c p p p P29 P38 P39 P48 P49 Dimensions Applicable to specific sizes: In. mm In. mm In. mm In. mm In. mm In. mm In. mm In. mm L max .280 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 W max .270 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 T max .095 2.41 0.095 2.41 0.19 4.83 0.19 4.83 0.285 7.24 0.285 7.24 380 9.65 380 9.65 Note: J-Lead and L-Lead options are available on all sizes above ELECTRICAL CHARACTERISTICS 2.0% X7R NPO 1.5% TEMPERATURE COEFFICIENT -55 TO 125C 0 15% 0 30ppm/C DISSIPATION FACTOR 1kHz, 25C 2.5% max 0.1% max AGING % per decade hour 2.5% None INSULATION RESISTANCE 1000 F or 100G , whichever is less at rated WVDC, 25C DIELECTRIC STRENGTH FOR 500V RATINGS 750VDC, 25C, 50mA max FOR 200V RATINGS 2xWVDC, 25C, 50mA max FOR 25-100V RATINGS 2.5xWVDC, 25C, 50mA max 1.0% 0.5% NPO 0.0% -0.5% -1.0% -1.5% -2.0% -55C -25C 0C 25C 50C 75C 100C 125C 25% 20% 15% 10% X7R 5% CAP & D.F. MEASUREMENTS 1kHz 50Hz, 1.00.2Vrms, 25C 0% -5% -10% -15% -20% -25% -55C -25C 0C 25C 50C 75C 100C 125C HOW TO ORDER - MINI-SWITCH MODE(R) 500 P28 W 395 K J 4 VOLTAGE Standard Voltages: 250 = 25 V 500 = 50 V 101 = 100 V 201 = 200 V 501 = 500 V CASE SIZE See Table DIELECTRIC N = NPO W = X7R CAPACITANCE 1st two digits are significant; third digit denotes number of zeros. TOLERANCE J = 5% K = 10% M = 20% Z = +80% -20% LEAD STYLE J = "J" Leads (formed in) L = "L" Leads (formed out) MARKING 4 = Unmarked 3 = Specified 4 = Unmarked 103 = 0.01 F 105 = 1.0 F 106 = 10 uF Part number written: 500P28W395KJ4U U SPECIAL CODE Code Type Reel U Embossed 13" 16mm tape None Bulk Packaged AMC tape specifications conform to EIA-481. 13 Advanced Monolythic Ceramics, Inc., A Johanson Company 3101 Constitution Avenue, Olean, New York 14760 * (716) 372-5225 * Fax (716) 372-5467