UP2 SERIES Unlytic Polypropylene High Capacitance Oval Wrap and Fill New high capacitance, simple design capacitor supporting DC voltage up to 3000VDC, with high current handling capability. FEATURES - Higher voltage ratings - Simple construction - Two types of terminals STANDARD CONFIGURATION - UP22: axial leads - UP26: radial tabs/low profile - UP27: radial tabs/high profile Rev. 2 Specification Summary Capacitance Range 2.0F to 85.0F Capacitance Tolerance Standard tolerance is 5%. Operating Temperature Range -55C to +85C (+105C upon special request) Enclosure/ Construction Wrap and Fill Voltage Rating VDC at 500VDC to 3000VDC Parameter Vibration Immersion Shock Humidity Thermal Shock Life Method 204 104 213 106 107 108 Reference MIL-STD-202 Condition D B I A F Characteristics Temperature(C ) Megaohmsx Microfarads 25 10,000 85 1,000 Insulation Resistance Temperature(C ) PercentageChange (typical) -55 1.4 25 0 65 -1.5 85 -3.5 CapacitanceChange Dissipation Factor When measured at the frequency specified for capacitance measurement, the dissipation factor will not exceed 0.1%. Dielectric Strength Capacitors withstand a DC potential of 120% rated voltage for two (2) minutes without damage or breakdown. Test voltage is applied and discharged through a resistance of 1 ohm per volt minimum, and at 25C. Rev. 2 ELECTRICAL DATA EC PART NUMBER CAP F VDC UP2_BA356J UP2_BA506J UP2_BA706J UP2_BA856J UP2_BC256J UP2_BC406J UP2_BC556J UP2_BC656J UP2_BG226J UP2_BG306J UP2_BG456J UP2_BG506J UP2_BJ186J UP2_BJ256J UP2_BJ356J UP2_BJ456J UP2_BL156J UP2_BL206J UP2_BL306J UP2_BL356J UP2_BN126J UP2_BN186J UP2_BN256J UP2_BN306J UP2_BR905J UP2_BR136J UP2_BR186J UP2_BR226J UP2_BT705J UP2_BT106J UP2_BT146J UP2_BT176J UP2_BX505J UP2_BX805J UP2_BX116J UP2_BX136J UP2_CA405J UP2_CA605J UP2_CA905J UP2_CA116J UP2_CB305J UP2_CB405J UP2_CB605J UP2_CB705J UP2_CD205J UP2_CD255J UP2_CD405J UP2_CD505J 35.0 50.0 70.0 85.0 25.0 40.0 55.0 65.0 22.0 30.0 45.0 50.0 18.0 25.0 35.0 45.0 15.0 20.0 30.0 35.0 12.0 18.0 25.0 30.0 9.0 13.0 18.0 22.0 7.0 10.0 14.0 17.0 5.0 8.0 11.0 13.0 4.0 6.0 9.0 11.0 3.0 4.0 6.0 7.0 2.0 2.5 4.0 5.0 500 500 500 500 600 600 600 600 800 800 800 800 900 900 900 900 1000 1000 1000 1000 1200 1200 1200 1200 1400 1400 1400 1400 1600 1600 1600 1600 1800 1800 1800 1800 2000 2000 2000 2000 2400 2400 2400 2400 3000 3000 3000 3000 "L" MAX in 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 1.562 1.812 2.312 2.562 "S" mm 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 39.7 46.0 58.7 65.1 in 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 2.246 2.565 3.033 3.315 ESR ESL mm mOHMS nH 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 57.0 65.2 77.0 84.2 4 5 6 7 5 5 7 8 5 6 8 9 5 7 9 9 6 8 9 11 6 8 10 12 7 9 12 13 8 10 14 15 10 11 16 18 12 14 17 19 13 17 21 25 15 22 26 28 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 28 37 50 58 I PEAK AMPS dv/dt V/s Fres kHz 1629 1634 1592 1639 1330 1494 1429 1433 1316 1261 1316 1240 1197 1167 1137 1240 1097 1027 1072 1061 957 1008 975 992 838 850 819 848 745 747 728 749 598 672 643 645 532 560 585 606 479 448 468 463 399 350 390 413 47 33 23 19 53 37 26 22 60 42 29 25 66 47 32 28 73 51 36 30 80 56 39 33 93 65 45 39 106 75 52 44 120 84 58 50 133 93 65 55 160 112 78 66 199 140 97 83 160.8 117.0 85.1 71.7 190.2 130.8 96.0 82.0 202.8 151.1 106.1 93.5 224.2 165.5 120.3 98.5 245.6 185.0 129.9 111.7 274.6 195.0 142.4 120.7 317.0 229.5 167.8 140.9 359.5 261.6 190.2 160.3 425.4 292.5 214.6 183.3 475.6 337.8 237.3 199.3 549.1 413.7 290.6 249.8 672.6 523.3 355.9 295.5 CURRENT 25C 37.7 35.5 32.4 31.9 33.3 34.5 30.9 29.9 34.3 31.1 30.0 27.5 32.9 30.2 27.5 28.5 31.5 28.1 27.0 25.8 29.0 28.4 25.7 25.1 27.3 26.0 23.4 23.2 25.9 24.4 22.2 21.9 22.4 23.2 20.8 20.1 21.0 20.7 19.9 19.8 20.5 18.3 17.6 16.8 19.0 16.0 16.3 16.5 (100 kHz) 55C 29.9 28.2 25.7 25.4 26.4 27.4 24.6 23.7 27.3 24.7 23.8 21.9 26.1 24.0 21.9 22.6 25.1 22.3 21.5 20.5 23.0 22.6 20.4 20.0 21.7 20.6 18.6 18.5 20.5 19.4 17.6 17.4 17.8 18.4 16.5 16.0 16.7 16.4 15.8 15.7 16.3 14.5 14.0 13.4 15.1 12.7 12.9 13.1 85C 19.3 18.2 16.5 16.3 17.0 17.6 15.8 15.3 17.5 15.9 15.3 14.1 16.8 15.4 14.1 14.5 16.1 14.3 13.8 13.2 14.8 14.5 13.1 12.8 13.9 13.3 12.0 11.9 13.2 12.5 11.3 11.2 11.5 11.9 10.6 10.3 10.8 10.6 10.2 10.1 10.5 9.3 9.0 8.6 9.7 8.2 8.3 8.4 Rev. 2 STYLE Rev. 2 ADDITIONAL INFORMATION The UP2 is an Unlytic polypropylene in an oval polyester wrap with epoxy end fill. Terminals are RoHS compliant tin plated copper. HOW TO ORDER TYPE UP2 UNLYTIC Polypropylene STYLE / VOLTAGE 2: Axial Lead or 6: radial tabs/low profile or 7: radial tabs/high profile) / DC Voltage Rating: BA:500, BC:600, etc. 2 BA The first two digits are significat, the third represents the number of zeros (e.g. 475=4700000pF) 356 CAPACITANCE IN PICOFARADS TOLERANCE J J=5% Other tolerances available. Marking and Date Code All capacitors are marked with company initials "EC", corporate logo or EC trademark--in addition to type UP2, capacitance, tolerance, rated DC working voltage and date code. The first two digits of the date code represent the year, the second two digits the week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009. Quality Assurance Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Certified Company. Raw material inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology, compact capacitor designs and establishing reliability procedures. Sales Offices United States Eastern: *Headquarters* P.O. Box 1278 Eatontown,NJ 07724 Tel: 732-542-7880 Fax: 732-542-0524 Central: Illinois 630-668-8747 email: sales@ecicaps.com website:www.ecicaps.com Europe Ireland Electronic ConceptsEurope LTD IDA Estate, Oughterad Co. Galway, Ireland tel: +353-91-552385,552432 fax: +353-91-552387 email: sales@ecicaps.ie website:www.electronicconcepts.ie Rev. 2