Transistors ag 2SA1952 / 2SA1906 / 25A1757 28C5103 / 2504596 High-speed Switching Transistor 2SA1952 /2SA1 @Festures 1) High speed switching (if: Typ. 0.15 2s at lo=3A) 2) Low Vcc. (Typ.0.2V at lo/la= 3/0,15A) 3) Wide SOA (safe operating area} 4} Complements the 25C5103/25C4596. 906 / 2SA1757 @ Absolute maximum ratings (Ta=25C} Collector currant @Packaging specifications and hre a 1757 power _ dissipation W{To=25'C)} @Electrical characterietica (Ta=25'C} Collector-emitter saturation voltage Base-emitter saturation voltage 1952 DG current transtar ratio (cso Vceqany Veen Hre Vece=2 ,Ic=1A PL=10 hat =lae= 0.15A (96-809-A314) High-speed Switching Transistor 28C5103 / 2SC4596 @Features 4) Low Voces. (Typ. 0.15V at Ic/le=3/0.15A) 2) High speed switching (tf? Typ. 0.1 ys at lc=3A) 3) Wide SOA (safe operating area) 4) Complements the 25A1952/25A1757. @Packaging specifications and hre @Electrical characteristics (Ta=25'C ) Collector-emitler saturation voltage Base-ernitter saturatian voltage DC current iransfer ratio * Measured using pulse current. @Absolute maximum ratings (Ta=25'C ) Collector current Collector power 2805103 w diggipation 2504596 W(Tc=25'C) % Single pulas Pwo100mea Vop=100 Vicejest) Veae(eat) hre Vorile=2ViiA ft Vce=1 lei = le2=0.15A (96-19-0314) Nom 267 Bi-polar transistorsNotes The contents described in this catalogue are correct as of March 1997. No unauthorized transmission or reproduction of this book, either in whole or in part, is permitted. The contents of this book are subject to change without notice. Always verify before use that the contents are the latest specifications. If, by any chance, a defect should arise in the equipment as a result of use without verification of the specifications, ROHM CO., LTD., can bear no responsibility whatsoever. Application circuit diagrams and circuit constants contained in this data book are shown as examples of standard use and operation. When designing for mass production, please pay careful attention to peripheral conditions. Any and all data, including, but not limited to application circuit diagrams, information, and various data, described in this catalogue are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO., LTD., disclaims any warranty that any use of such device shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes absolutely no liability in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices; other than for the buyer's right to use such devices itself, resell or otherwise dispose of the same; no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or contralled by ROHM CO., LTD., is granted to any such buyer. The products listed in this catalogue are designed to be used with ordinary electronic equip- ment or devices (such as audio-visual equipment, office-automation equipment, communica- tions devices, electrical appliances, and electronic toys). Should you intend to use these prod- ucts with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, trans- portation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers, or oth- er safety devices) please be sure to consult with our sales representatives in advance. Notes when exporting It is essential to obtain export permission when exporting any of the above products when it falls under the category of strategic material (or labor) as determined by foreign exchange or foreign trade control laws. : Please be sure to consult with our sales representatives to ascertain whether any prod- uct is classified as a strategic material.