SPECIFICATION CONTROL DRAWING
Raychem THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* DEVICES, SHIELD
TERMINATION-LOW TEMPERATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO. B-051-0X-01
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980628 REPLACES:
B0510101
DRAWN BY:
M. FORONDA DATE:
06/15/98 PROD. REV.
SEE TABLE DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name L
max øA
min øB
min øD
max øE
min J
min
B-051-00-01 B 27.0
(1.065) 19.0
(0.750) 17.0
(0.670) 17.0
(0.670) 10.0
(0.395) 27.0
(1.065)
B-051-01-01 D 27.5
(1.085) 25.0
(0.985) 23.0
(0.905) 23.0
(0.905) 12.7
(0.500) 27.5
(1.085)
B-051-02-01 D 33.2
(1.310) 34.0
(1.340) 33.0
(1.300) 33.0
(1.300) 19.1
(0.750) 33.2
(1.310)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. These controlled soldering devices are designed to terminate the braid of a braided connector backshell to the braid of a tin
plated or bare copper shield on a cable having an insulation rated for at least +85°C.
2. Temperature range: -55°C to +125°C. For application tooling, consult your local Raychem technical service.
For best results, prepare the cable as shown:
* A trademark of Raychem Corpor ation.
