ATCA-7360 AdvancedTCA Processor Blade The ATCA-7360 processor blade is an ideal solution for communications equipment requiring powerful server class processing performance, flexible mass storage and network options nn High performance Intel(R) Architecture processor blade nn Two quad-core Intel(R) Xeon(R) processors L5518 (2.13 GHz) nn Up to 80GB main memory nn Hot-swappable hard disk with flexible choice of storage options nn RAID 0/1 support nn Multiple network and storage I/O connectivity nn Option 9 (1/10GbE) ATCA fabric interface nn Designed for NEBS and ETSI compliance nn Multiple software packages including operating systems The Emerson Network Power ATCA-7360 is an Intel(R) Architecture server blade that delivers a combination of performance and flexibility to help drive the successful implementation of next-generation telecom networks and communication infrastructures. It builds on the AdvancedTCA(R) (ATCA(R)) standard to provide the right product at the right time to meet the needs of communication industries. With two quad-core Intel(R) Xeon(R) processors L5518, the ATCA-7360 processor blade enables best-in-class compute performance in an ATCA form factor. The PICMG(R) 3.1 compliant fabric interface provides 10 Gigabit Ethernet (10Gbps) capability for applications requiring higher network throughput in the backplane. Multiple network and storage I/O interfaces allow the integration into different network infrastructures such as telecommunication central offices and network data centers. Main memory configuration and mass storage options can be flexibly configured providing a perfect fit to the applications needs. Hardware RAID 0 and 1 is supported for locally and externally connected disk drives. ATCA-7360 Block Diagram 5 DDR3 VLP DIMM Slots 5 DDR3 VLP DIMM Slots DDR3 1066 Quad-Core Intel(R) Xeon(R) Processor 5500 Series DDR3 1066 DDR3 1066 QPI 5.86 GT/s DDR3 1066 Quad-Core Intel(R) Xeon(R) Processor 5500 Series QPI 5.86 GT/s RTM-ATCA-7360 Management, Control, Power DDR3 1066 DDR3 1066 1x USB USB, IPMC, Control, Power QPI 5.86 GT/s PCI Express x4 PCI Express x4 Zone 3 to RTM (P30, P31, P32) PCI Express x4 Intel(R) 5520 Chipset I/O Hub PCI Express x4 Intel (R) 82576 Dual 1GbE 1000 Base-T Intel (R) 82576 Dual 1GbE 1000 Base-T Intel (R) 82576 Dual 1GbE 1000 Base-T LSISAS 1064E SAS Cntr. SAS Con. PCI Express x4 SAS/SATA (Update Channel) ESI 1000 Base-T 2x USB GbE USB 2.0 Intel(R) I/O Controller Hub ICH10R PCI Express x4 Intel(R) 82572 GbE (R) USB SATA VGA (opt.) VGA Module (opt.) PCI Express x8 SPI PCIe Flash Disk Emb. SSD LPC Flash 1 Serial Console COM PCI Express x4 Intel 82599 Dual 10GbE Intel(R) 82576 Dual 1GbE GbE (Update) 1 & 10 GbE (Fabric) Zone 2 to Backplane (P20, P23) GbE (Base) FPGA Flash 2 -48V On-board Power Supplies and Hot Swap Circuitry IPMC IPMB-A -48V Hot-swappable HDD 2.5FF Zone 1 to Backplane (P10) IPMB-B Standard Networking Support The ATCA-7360 processor blade provides PICMG 3.0 base interface connectivity in a dual star configuration using standard Gigabit Ethernet (GbE) technology. The PICMG 3.1 fabric interface features both dual 10Gbps (Option 9) and dual 1Gbps (Option 1) Ethernet capability. A further 1Gbps Ethernet backplane connection is available on the ATCA update channel. External network connectivity includes 10/100/1000Base-T Ethernet via RJ-45 connector on the blade faceplate. Several rear transition module (RTM) configurations support up to six additional 10/100/1000Base-T connections. Processor Complex Both Intel(R) Xeon(R) processors L5518 are connected together via QPI busses to share memory resources. The processors can access the entire I/O subsystem via the Intel(R) 5520 chipset I/O hub. The I/O subsystem consists of: Intel(R) I/O Controller Hub ICH10R Intel(R) 82572 Gigabit Ethernet controller Intel(R) 82576 dual Gigabit Ethernet controllers Intel(R) 82599 dual 10 Gigabit Ethernet controller Intel(R) 82580 dual 10 Gigabit Ethernet controller (on optional RTM) LSI Logic LSISAS1064E SAS controller (on optional RTM) 2 Software Support The ATCA-7360 blade can be configured with a variety of software offerings, from firmware-only to fully integrated and verified software operating environments. FIRMWARE Firmware-only blade-level support is offered for customers taking on the integration and verification responsibilities. It provides all the boot and IPMC firmware required for an ATCA blade. The BIOS firmware includes support for: Unified Extensible Firmware Interface (UEFI) Power management support, ACPI 3.0b Multiple boot options including: To better exploit the CPU and I/O resources of the blade, RHEL 5.5 supports CPU and I/O virtualization using XEN/KVM. In addition RHEL 5.5 provides code for enabling the processor power management to help enhancing energy efficiency of the blade. Emerson ATCA blades can be configured with optional software that includes Basic Blade Services. When integrated in one of the Emerson ATCA CentellisTM platforms, the ATCA-7360 comes complete with, and is verified with, Wind River PNE 3.0. This distribution comes with all Linux Support Packages (LSPs) to support Emerson ATCA blades as well as user applications. Basic Blades Services (BBS) software is provided to enable a set of ATCA hardware and software components into a fully integrated and verified telecom platform - the Centellis platform. This platform is ready for customers HA middleware and application environment. cc Local and external hard disks cc On-board flash disk cc External USB boot media cc PXE boot via ATCA base interface Basic Blade Services include: cc iSCSI boot via ATCA base interface with operating systems supporting UEFI Hardware Platform Management including local IPMC, LED, E-Keying and blade extraction software RAID 0/1 support via LSI SAS BIOS extension Firmware upgrade utility Serial redirection of the BIOS console Local management access (CLI) Serial over LAN of the BIOS console via ATCA base interface RELEVANT STANDARDS BIOS upgrade via local host Linux Foundation INTELLIGENT PLATFORM MANAGEMENT CONTROL The ATCA-7360 features an intelligent platform management controller (IPMC). The IPMC is a management subsystem providing monitoring, event logging, and recovery control. The IPMC serves as the gateway for management applications to access the platform hardware. Features include: Compliance with PICMG 3.0 and IPMI 1.5 Rollback capability or IPMC image upgrade failed Firmware (BIOS, IPMC, FPGA, FRU) upgradable from IPMI interface (IPMB) and/or locally, or via Basic Blade Services (BBS) firmware upgrade utility Support for serial port redirection over LAN interface (IPMI 2.0 compliant) SUPPORTED OPERATING SYSTEMS Service Availability ForumTM (SA Forum) cc Hardware Platform Interface (HPI) - HPI-B.02 Please check with your local sales contact for availability of supported CentellisTM platforms. Rear Transition Modules Several RTM variants are available to support different I/O configurations at the RTM faceplate. RTM-ATCA-7360 includes: One (1) USB 2.0 interface Six (6) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connector Two (2) SAS interfaces, SFF-8470 connector Disk bay for one (1) hot-swappable hard disk, 2.5" Red Hat RHEL 5.5 certified RTM-ATCA-7360-L includes: Wind River PNE LE 3.0 One (1) USB 2.0 interface Prepared for Microsoft(R) Windows(R) Server 2008 Compatible with Windows Server 2003 x86 Prepared for VMware ESX/ESXi (requires VGA module) Two (2) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connector Two (2) SAS interfaces, SFF-8470 connector Disk bay for one (1) hot-swappable hard disk, 2.5" 3 RTM-ATCA-736X-DD supports: Two (2) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connectors COUNTERS /TIMERS Two (2) disk bays for hot-swappable hard disks, 2.5" Programmable watchdog timer Hardware PROCESSOR Real-time clock EXTERNAL INTERFACES Front panel Two quad-core Intel(R) Xeon(R) L5518 (2.13 GHz) processors QuickPath Interface (QPI) - 5.86 GT/s 8MB L3 cache (per processor) 64-bit mode extension (EM64T) cc 10/100/1000Base-T Ethernet (1), RJ-45 cc Serial console (1), RJ-45 cc USB 2.0 (2) cc Optional VGA interface (on request) Rear transition module SMP support cc USB 2.0 (1) cc Gigabit Ethernet interfaces (2 or 6), optional, RJ-45 cc SAS interfaces (2), SFF-8470 MEMORY DDR3-1066 memory controllers integrated into processors Total of six independent memory channels POWER REQUIREMENTS From 2 to 80GB memory configurations supported Dual-redundant -48 to -60 VDC (TNV-2) rail 4MB primary firmware flash, 4MB redundant flash for failsafe operation Input range: -41 to -72 VDC Power consumption including RTM Reset persistent memory, 16MB SRAM, 64MB flash (optional) Note 1 MASS STORAGE Embedded USB flash disk, 4GB (higher capacity upon request) On-board solid state disk at SATA, 32GB or 64GB (optional) Note 1 Typical: 180 - 220 W cc Maximum: 260 W THERMAL CHARACTERISTICS Operating range: -5 C to 55 C Airflow requirements according to CP-TA B.4 (B.3 with specific configurations) Hot-swappable hard disk on RTM RELEVANT BLADE SIZE Hard disk drive options including 8U form factor, 280 mm X 322.5 mm, single slot cc Enterprise class disks (various capacity options) cc 80GB SATA disk with extended temperature range RELEVANT STANDARDS BASE AND FABRIC INTERFACES PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) Dual star configuration PICMG 3.1, Option 1, 9 PICMG 3.0 base interface compliant, Gigabit Ethernet (1.0Gbps) PICMG 3.1 fabric interface compliant cc PICMG 3.1, Option 1 - Single, redundant Gigabit Ethernet pair (1.0Gbps) cc PICMG 3.1, Option 9 - Single, redundant 10 Gigabit Ethernet pair (10Gbps) PICMG 3.0 Update Channel Gigabit Ethernet (1.0Gbps) Note 1: Persistent memory and solid state disk mutually exclusive 4 cc Ordering Information Part Number Description ATCA-7360-12GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 2GB, 10G support ATCA-7360-24GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 4GB, 10G support ATCA-7360-48GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 8GB, 10G support ATCA-7360-0GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 0GB, 10G support. See Note 1 ATCA-7360-MEM-2G 2GB DDR3 VLP memory module for ATCA-736X product series ATCA-7360-MEM-4G 4GB DDR3 VLP memory module for ATCA-736X product series ATCA-7360-MEM-8G 8GB DDR3 VLP memory module for ATCA-736X product series RTM-ATCA-7360 RTM for the ATCA-736X product series, 6X GbE, 2X SAS,1X slot for optional HDD RTM-ATCA-7360-L RTM for the ATCA-736X product series, 2X GbE, 2X SAS, 1X slot for optional HDD ATCA7360-HDD1-SAS 147GB SAS HDD kit for the RTM-ATCA-7360. See Note 2 ATCA7360-HDD2-SAS 300GB SAS HDD kit for the RTM-ATCA-7360. See Note 2 ATCA7360-HDD4-SAS 600GB SAS HDD kit for the RTM-ATCA-7360. See Note 2 ATCA7360-HDD3-SATA 80GB SATA HDD (ext. temp.) kit for the RTM-ATCA-7360. See Note 2 RTM-ATCA-736X-DD RTM for the ATCA-736X product series, 2X GbE, 2X slot for optional HDD RTM-ATCA-736X-DD-300 RTM for the ATCA-736X product series, 2X GbE, 2X 147GB SAS HDD included RTM-ATCA-736X-DD-600 RTM for the ATCA-736X product series, 2X GbE, 2X 300GB SAS HDD included RTM-ATCA-736X-DD-1K2 RTM for the ATCA-736X product series, 2X GbE, 2X 600GB SAS HDD included RTM-ATCA-7360-HDDKIT Carrier and mounting kit for HDD or SSD devices used with RTM-ATCA-7360 or RTM-ATCA7360-L (no disk included) ATCA7360-MMOD-SATA1 32GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3 ATCA7360-MMOD-SATA2 64GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3 ATCA7360-MMOD-SATA3 120GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3 ATCA7360-SFMMOD Reset persistent memory, 16MB SRAM, 64MB flash for the ATCA-736X product series. See Note 3 RJ45-DSUB-ATCA RJ-45 DSUB cable for the ATCA-7140, 7X50, 736X, 737X, 747X blades SA-BBS-WR30-7360 CD - BBS SW and WR PNE 3.0 for ATCA-7360 and ATCA-7365. See Note 4 Note 1: No memory installed Note 2: Optional carrier kit for RTM-ATCA-7360 and RTM-ATCA-7360-L Note 3: Persistent memory and solid state disk mutually exclusive Note 4: License for a single blade 5 Regulatory Compliance Item Description Designed to comply with NEBS, Level 3 Telcordia GR-63-CORE, NEBS Physical Protection Designed to comply with ETSI Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment. Equipment Type 2 ETSI Storage, EN 300 019-1-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations ETSI Transportation, EN 300 019-1-2, Class 2.3 equipment, Public Transportation ETSI Operation, EN 300 019-1-3, Class 3.1(E) equipment, Temperature Controlled Locations ETSI EN 300 132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) ETSI ETS 300 753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment CE Conformity Directive 2004/108/EC, Directive 2006/95/EC EMC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) CFR 47 FCC Part 15 Subpart B, Class A (US); FCC Part 15 - Radio Frequency Devices; Subpart B: Unintentional Radiators AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment CISPR 22 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement CISPR 24 Information technology equipment - Immunity characteristics - Limits and methods of measurement Certified to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme Safety Safety of information technology equipment, including electrical business equipment RoHS/WEEE compliance Interoperability DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE) Designed to operate within a CP-TA B.4 system environment at full performance SOLUTION SERVICES Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. PICMG, AdvancedTCA, ATCA, AdvancedMC and the AdvancedTCA logo are trademarks of PICMG. Service Availability is a proprietary trademark used under license. Intel and Xeon are trademarks of Intel Corporation or its subsidiaries in the Unites States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power's licensee, licensee's transferees, and licensee's customers and users. Availability of some of the products and services described herein may be restricted in some locations. Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Power Connectivity Infrastructure Management & Monitoring Racks & Integrated Cabinets DC Power Outside Plant Services Embedded Computing Power Switching & Controls Surge Protection Emerson Network Power Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Paris, France +33 1 60 92 31 20 * Munich, Germany +44 1509 236490 * Tel Aviv, Israel +972 9 9560361 Hong Kong +852 2176 3540 * Shanghai, China +86 21 3395 0289 * Tokyo, Japan +81 3 5403 2730 * Seoul, Korea +82 2 3483 1500 EmersonNetworkPower.com/EmbeddedComputing Precision Cooling Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. (c)2011 Emerson Electric Co. ATCA7360-D7 08/11