Front page
Interior page
The ATCA-7360 processor
blade is an ideal solution for
communications equipment
requiring powerful server
class processing performance,
flexible mass storage and
network options
nHigh performance Intel®
Architecture processor blade
nTwo quad-core Intel® Xeon®
processors L5518 (2.13 GHz)
nUp to 80GB main memory
nHot-swappable hard disk with
exible choice of storage options
nRAID 0/1 support
nMultiple network and storage
I/O connectivity
nOption 9 (1/10GbE) ATCA
fabric interface
nDesigned for NEBS and ETSI
compliance
nMultiple software packages
including operating systems
The Emerson Network Power ATCA-7360 is an Intel® Architecture server blade that
delivers a combination of performance and exibility to help drive the successful imple-
mentation of next-generation telecom networks and communication infrastructures.
It builds on the AdvancedTCA® (ATCA®) standard to provide the right product at the
right time to meet the needs of communication industries.
With two quad-core Intel® Xeon® processors L5518, the ATCA-7360 processor blade
enables best-in-class compute performance in an ATCA form factor. The PICMG® 3.1
compliant fabric interface provides 10 Gigabit Ethernet (10Gbps) capability for
applications requiring higher network throughput in the backplane.
Multiple network and storage I/O interfaces allow the integration into different
network infrastructures such as telecommunication central ofces and network data
centers. Main memory conguration and mass storage options can be exibly
congured providing a perfect t to the applications needs. Hardware RAID 0 and 1 is
supported for locally and externally connected disk drives.
ATCA-7360
AdvancedTCA Processor Blade
Front page
Interior page
2
PCI Express x8
PCI Express x4
Flash 1
Flash
Disk
Flash 2
FPGA
IPMC
COM
Serial
Console
2x USB
1000
Base-T
QPI
5.86 GT/s QPI
5.86 GT/s
QPI
5.86 GT/s
DDR3 1066
DDR3 1066
DDR3 1066
DDR3 1066
DDR3 1066
DDR3 1066
SPI
USB
USB 2.0
GbE
PCI Express x4
ESI
PCI Express x4
PCI Express x4
PCI Express x4
PCI Express x4
PCI Express x4
USB, IPMC, Control, Power
SAS/SATA (Update Channel)
5 DDR3 VLP DIMM Slots
5 DDR3 VLP DIMM Slots
Intel®
82572
GbE
Intel®
82599
Dual
10GbE
Intel®I/O Controller Hub
ICH10R
Intel®5520 Chipset
I/O Hub
RTM-ATCA-7360
Quad-Core
Intel®Xeon®
Quad-Core
Intel®Xeon®
Processor 5500
Series
Intel®
82576
Dual
1GbE
Zone 1
to
Backplane
(P10)
On-board Power
Supplies and
Hot Swap Circuitry
IPMB-A
IPMB-B
-48V
-48V
Zone 2
to
Backplane
(P20, P23)
Hot-swappable
HDD 2.5FF
LSISAS
1064E
SAS
Cntr.
SAS
Con.
1000
Base-T
1000
Base-T
1000
Base-T
1x USB
Management,
Control, Power
Intel®
82576
Dual
1GbE
Intel®
82576
Dual
1GbE
Intel®
82576
Dual
1GbE
Zone 3
to
RTM
(P30, P31,
P32)
GbE (Base)
1 & 10 GbE
(Fabric)
GbE (Update)
Processor 5500
Series
Emb.
SSD
SATA
LPC
VGA
Module
(opt.)
VGA
(opt.) PCIe
Standard Networking Support
The ATCA-7360 processor blade provides PICMG 3.0
base interface connectivity in a dual star conguration
using standard Gigabit Ethernet (GbE) technology.
The PICMG 3.1 fabric interface features both dual
10Gbps (Option 9) and dual 1Gbps (Option 1) Ethernet
capability. A further 1Gbps Ethernet backplane
connection is available on the ATCA update channel.
External network connectivity includes
10/100/1000Base-T Ethernet via RJ-45 connector on
the blade faceplate. Several rear transition module
(RTM) congurations support up to six additional
10/100/1000Base-T connections.
Processor Complex
Both Intel® Xeon® processors L5518 are connected
together via QPI busses to share memory resources.
The processors can access the entire I/O subsystem via
the Intel® 5520 chipset I/O hub. The I/O subsystem
consists of:
Intel® I/O Controller Hub ICH10R
Intel® 82572 Gigabit Ethernet controller
Intel® 82576 dual Gigabit Ethernet controllers
Intel® 82599 dual 10 Gigabit Ethernet controller
Intel® 82580 dual 10 Gigabit Ethernet controller (on
optional RTM)
LSI Logic LSISAS1064E SAS controller (on optional
RTM)
ATCA-7360 Block Diagram
Front page
Interior page
3
Software Support
The ATCA-7360 blade can be congured with a variety
of software offerings, from rmware-only to fully
integrated and veried software operating environ-
ments.
FIRMWARE
Firmware-only blade-level support is offered for
customers taking on the integration and verication
responsibilities. It provides all the boot and IPMC
rmware required for an ATCA blade.
The BIOS rmware includes support for:
Unied Extensible Firmware Interface (UEFI)
Power management support, ACPI 3.0b
Multiple boot options including:
cLocal and external hard disks
cOn-board ash disk
cExternal USB boot media
cPXE boot via ATCA base interface
ciSCSI boot via ATCA base interface with operating
systems supporting UEFI
RAID 0/1 support via LSI SAS BIOS extension
Serial redirection of the BIOS console
Serial over LAN of the BIOS console via ATCA base
interface
BIOS upgrade via local host
INTELLIGENT PLATFORM MANAGEMENT CONTROL
The ATCA-7360 features an intelligent platform
management controller (IPMC). The IPMC is a
management subsystem providing monitoring, event
logging, and recovery control. The IPMC serves as the
gateway for management applications to access the
platform hardware. Features include:
Compliance with PICMG 3.0 and IPMI 1.5
Rollback capability or IPMC image upgrade failed
Firmware (BIOS, IPMC, FPGA, FRU) upgradable
from IPMI interface (IPMB) and/or locally, or via
Basic Blade Services (BBS) rmware upgrade utility
Support for serial port redirection over LAN
interface (IPMI 2.0 compliant)
SUPPORTED OPERATING SYSTEMS
Red Hat RHEL 5.5 certied
Wind River PNE LE 3.0
Prepared for Microsoft® Windows® Server 2008
Compatible with Windows Server 2003 x86
Prepared for VMware ESX/ESXi (requires VGA
module)
To better exploit the CPU and I/O resources of the
blade, RHEL 5.5 supports CPU and I/O virtualization
using XEN/KVM. In addition RHEL 5.5 provides code
for enabling the processor power management to
help enhancing energy efciency of the blade.
Emerson ATCA blades can be congured with optional
software that includes Basic Blade Services. When
integrated in one of the Emerson ATCA Centellis™
platforms, the ATCA-7360 comes complete with, and
is veried with, Wind River PNE 3.0. This distribution
comes with all Linux Support Packages (LSPs) to
support Emerson ATCA blades as well as user applica-
tions. Basic Blades Services (BBS) software is provided
to enable a set of ATCA hardware and software
components into a fully integrated and veried
telecom platform – the Centellis platform. This
platform is ready for customers HA middleware and
application environment.
Basic Blade Services include:
Hardware Platform Management including local
IPMC, LED, E-Keying and blade extraction software
Firmware upgrade utility
Local management access (CLI)
RELEVANT STANDARDS
Linux Foundation
Service Availability Forum™ (SA Forum)
cHardware Platform Interface (HPI) – HPI-B.02
Please check with your local sales contact for availabil-
ity of supported Centellis™ platforms.
Rear Transition Modules
Several RTM variants are available to support different
I/O congurations at the RTM faceplate.
RTM-ATCA-7360 includes:
One (1) USB 2.0 interface
Six (6) Gigabit Ethernet interfaces,
10/100/1000Base-T, RJ-45 connector
Two (2) SAS interfaces, SFF-8470 connector
Disk bay for one (1) hot-swappable hard disk, 2.5”
RTM-ATCA-7360-L includes:
One (1) USB 2.0 interface
Two (2) Gigabit Ethernet interfaces,
10/100/1000Base-T, RJ-45 connector
Two (2) SAS interfaces, SFF-8470 connector
Disk bay for one (1) hot-swappable hard disk, 2.5”
Front page
Interior page
4
RTM-ATCA-736X-DD supports:
Two (2) Gigabit Ethernet interfaces,
10/100/1000Base-T, RJ-45 connectors
Two (2) disk bays for hot-swappable hard disks, 2.5"
Hardware
PROCESSOR
Two quad-core Intel® Xeon® L5518 (2.13 GHz)
processors
QuickPath Interface (QPI) – 5.86 GT/s
8MB L3 cache (per processor)
64-bit mode extension (EM64T)
SMP support
MEMORY
DDR3-1066 memory controllers integrated into
processors
Total of six independent memory channels
From 2 to 80GB memory congurations supported
4MB primary rmware ash, 4MB redundant ash
for failsafe operation
Reset persistent memory, 16MB SRAM, 64MB ash
(optional) Note 1
MASS STORAGE
Embedded USB ash disk, 4GB (higher capacity upon
request)
On-board solid state disk at SATA, 32GB or 64GB
(optional) Note 1
Hot-swappable hard disk on RTM
Hard disk drive options including
cEnterprise class disks (various capacity options)
c80GB SATA disk with extended temperature range
BASE AND FABRIC INTERFACES
Dual star conguration
PICMG 3.0 base interface compliant, Gigabit
Ethernet (1.0Gbps)
PICMG 3.1 fabric interface compliant
cPICMG 3.1, Option 1 – Single, redundant Gigabit
Ethernet pair (1.0Gbps)
cPICMG 3.1, Option 9 – Single, redundant 10
Gigabit Ethernet pair (10Gbps)
PICMG 3.0 Update Channel Gigabit Ethernet (1.0Gbps)
COUNTERS /TIMERS
Real-time clock
Programmable watchdog timer
EXTERNAL INTERFACES
Front panel
c10/100/1000Base-T Ethernet (1), RJ-45
cSerial console (1), RJ-45
cUSB 2.0 (2)
cOptional VGA interface (on request)
Rear transition module
cUSB 2.0 (1)
cGigabit Ethernet interfaces (2 or 6), optional,
RJ-45
cSAS interfaces (2), SFF-8470
POWER REQUIREMENTS
Dual-redundant –48 to –60 VDC (TNV-2) rail
Input range: –41 to –72 VDC
Power consumption including RTM
cTypical: 180 - 220 W
cMaximum: 260 W
THERMAL CHARACTERISTICS
Operating range: –5 °C to 55 °C
Airow requirements according to CP-TA B.4
(B.3 with specic congurations)
RELEVANT BLADE SIZE
8U form factor, 280 mm X 322.5 mm, single slot
RELEVANT STANDARDS
PICMG 3.0 (form factor, IPMI, base interface, hot
swap, RTM)
PICMG 3.1, Option 1, 9
Note 1: Persistent memory and solid state disk mutually exclusive
Front page
Interior page
5
Ordering Information
Part Number Description
ATCA-7360-12GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 2GB, 10G support
ATCA-7360-24GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 4GB, 10G support
ATCA-7360-48GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 6X 8GB, 10G support
ATCA-7360-0GB ATCA processor blade, dual L5518 quad-core (2.13 GHz), 0GB, 10G support. See Note 1
ATCA-7360-MEM-2G 2GB DDR3 VLP memory module for ATCA-736X product series
ATCA-7360-MEM-4G 4GB DDR3 VLP memory module for ATCA-736X product series
ATCA-7360-MEM-8G 8GB DDR3 VLP memory module for ATCA-736X product series
RTM-ATCA-7360 RTM for the ATCA-736X product series, 6X GbE, 2X SAS,1X slot for optional HDD
RTM-ATCA-7360-L RTM for the ATCA-736X product series, 2X GbE, 2X SAS, 1X slot for optional HDD
ATCA7360-HDD1-SAS 147GB SAS HDD kit for the RTM-ATCA-7360. See Note 2
ATCA7360-HDD2-SAS 300GB SAS HDD kit for the RTM-ATCA-7360. See Note 2
ATCA7360-HDD4-SAS 600GB SAS HDD kit for the RTM-ATCA-7360. See Note 2
ATCA7360-HDD3-SATA 80GB SATA HDD (ext. temp.) kit for the RTM-ATCA-7360. See Note 2
RTM-ATCA-736X-DD RTM for the ATCA-736X product series, 2X GbE, 2X slot for optional HDD
RTM-ATCA-736X-DD-300 RTM for the ATCA-736X product series, 2X GbE, 2X 147GB SAS HDD included
RTM-ATCA-736X-DD-600 RTM for the ATCA-736X product series, 2X GbE, 2X 300GB SAS HDD included
RTM-ATCA-736X-DD-1K2 RTM for the ATCA-736X product series, 2X GbE, 2X 600GB SAS HDD included
RTM-ATCA-7360-HDDKIT Carrier and mounting kit for HDD or SSD devices used with RTM-ATCA-7360 or RTM-ATCA-
7360-L (no disk included)
ATCA7360-MMOD-SATA1 32GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3
ATCA7360-MMOD-SATA2 64GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3
ATCA7360-MMOD-SATA3 120GB on-board solid state disk at SATA for ATCA-736X product series. See Note 3
ATCA7360-SFMMOD Reset persistent memory, 16MB SRAM, 64MB ash for the ATCA-736X product series.
See Note 3
RJ45-DSUB-ATCA RJ-45 DSUB cable for the ATCA-7140, 7X50, 736X, 737X, 747X blades
SA-BBS-WR30-7360 CD - BBS SW and WR PNE 3.0 for ATCA-7360 and ATCA-7365. See Note 4
Note 1: No memory installed
Note 2: Optional carrier kit for RTM-ATCA-7360 and RTM-ATCA-7360-L
Note 3: Persistent memory and solid state disk mutually exclusive
Note 4: License for a single blade
Front page
Interior page
EmersonNetworkPower.com/EmbeddedComputing
Emerson Network Power
Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720
Paris, France +33 1 60 92 31 20 • Munich, Germany +44 1509 236490 • Tel Aviv, Israel +972 9 9560361
Hong Kong +852 2176 3540 • Shanghai, China +86 21 3395 0289 • Tokyo, Japan +81 3 5403 2730 • Seoul, Korea +82 2 3483 1500
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
Emerson, Business-Critical Continuity and
Emerson Network Power are trademarks of
Emerson Electric Co. or one of its affiliated
companies. ©2011 Emerson Electric Co.
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Infrastructure Management & Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
ATCA7360-D7 08/11
Regulatory Compliance
Item Description
Designed to comply with NEBS,
Level 3
Telcordia GR-63-CORE, NEBS Physical Protection
Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety –
Generic Criteria for Network Telecommunications Equipment. Equipment Type 2
Designed to comply with ETSI ETSI Storage, EN 300 019-1-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations
ETSI Transportation, EN 300 019-1-2, Class 2.3 equipment, Public Transportation
ETSI Operation, EN 300 019-1-3, Class 3.1(E) equipment, Temperature Controlled Locations
ETSI EN 300 132-2 Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 2: Operated by direct current (dc)
ETSI ETS 300 753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications
equipment
CE Conformity Directive 2004/108/EC, Directive 2006/95/EC
EMC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM);
telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements,
Telecommunication equipment room (attended)
CFR 47 FCC Part 15 Subpart B, Class A (US); FCC Part 15 - Radio Frequency Devices; Subpart B:
Unintentional Radiators
AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio
Disturbance Characteristics of Information Technology Equipment
VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology
Equipment
CISPR 22 Information technology equipment – Radio disturbance characteristics – Limits and
methods of measurement
CISPR 24 Information technology equipment – Immunity characteristics – Limits and
methods of measurement
Safety Certied to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme
Safety of information technology equipment, including electrical business equipment
RoHS/WEEE compliance
DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction
of the use of certain hazardous substances in electrical and electronic equipment (RoHS)
DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste
electrical and electronic equipment (WEEE)
Interoperability Designed to operate within a CP-TA B.4 system environment at full performance
PICMG, AdvancedTCA, ATCA, AdvancedMC and the AdvancedTCA logo are trademarks of PICMG. Service Availability is a proprietary trademark used under license. Intel and Xeon are trademarks of
Intel Corporation or its subsidiaries in the Unites States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product or service names are the property
of their respective owners.
This document identies products, their specications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future
availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should
exercise its own independent judgment to conrm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or
information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network
Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.
SOLUTION SERVICES
Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed
time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh.
