1435797-3 - TE Connectivity / AMP

BROADBAND NETWORK SOLUTIONS /// WALL BOX SOLUTIONS

WALL BOX SOLUTIONS

Indoor/Outdoor Fiber Terminals,

Cabinets and Boxes for FTTx

Contents

Introduction ................................................................................................................................................................

Products-at-a-Glance............................................................................................................................................

MiniRapidFiberDistributionTerminal(RDT) ..........................................................................................

RapidFiberDistributionTerminal(RDT) ................................................................................................. 

SmallOutdoorFiberDistributionTerminal(oFDT) ...........................................................................

LargeOutdoorFiberDistributionTerminal(oFDT) ...........................................................................

IndoorFiberDistributionTerminals(iFDT) ............................................................................................

IndoorFiberWallMountBoxes ....................................................................................................................

FLpakAdapterPacks ..................................................................................................................................

FlexibleFiberBox(FFB) ..................................................................................................................................

FiberSplitterBox(FSB) ...................................................................................................................................

PremisesPatchandorSpliceEnclosure-FibrBossPB-S ...................................................... 

PremisesPatchandorSpliceEnclosure-FibrBossPB-B .....................................................

WallOutlets-OWB-S(OutdoorWallMountedSmallBox) ..........................................................

RapidFiberFaceplate .......................................................................................................................................

WallOutlets-CustomerWallOutlet(COWO) ..................................................................................... 

WallOutlets-TransitionBoxwithDLXAdapters ..............................................................................

WallOutlets-FTUO(FiberTerminationUnitOutdoor) .................................................................

WallOutlets-CustomerPremisesWallOutlet(HFTP) ...................................................................

Accessories ..............................................................................................................................................................

4www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Introduction

TE Connectivity (TE): The Connectivity

Leader in Fiber Wall Box Solutions

No matter what your network requirements are, TE has

a complete portfolio of wall box solutions available to

meet your ﬁber connectivity needs. In today’s competitive

marketplace, every subscriber counts, which demands

service providers to be more strategic in their network plans

and ﬁber deployments. To satisfy customers’ bandwidth

requirements, service providers need to build their networks

smarter, faster and more eciently. At the same time,

increased competition in the marketplace is pressuring

providers to reduce unnecessary capital and operating

expenses wherever possible. These challenges can have a

major impact on service providers’ bottom line. Ultimately,

choosing network equipment that addresses ﬂexibility and

future capacity is vital to building and sustaining a cost-

eective and proﬁtable network. TE's wall box solutions help

to address these challenges, and oer customers’ unrivaled

quality, performance and reliability for the multifaceted

needs of tomorrow’s networks.

TE WALL BOX PORTFOLIO

TE wall boxes are designed for use in both in-building and

outside plant environments—from the CO/Head End to the

customer premiseslocations.

• Oer an unrivaled breadth of low to high density

solutions with superior cable management

• “Right sized” enclosures meet space

requirements for a variety of environments

• Proven reliability in ﬁber networks

• Modular, “build as you grow” ﬂexibility

• Promotes fast service turn ups

CABLE MANAGEMENT

The management of the ﬁber cables has a direct impact

on network reliability, performance and cost. TE’swall box

solutions incorporate the four elements of a successful cable

managementsystem:

• Integrated bend radius protection

• Clear, intuitive cable routing paths

• Easy connector and cable access

• Physical protection of ﬁber

PERFORMANCE

TE’s wall box solutions are designed to perform in the most

rigorous customer applications and in a variety of ﬁber

environments.

• Created for longevity and low life-cycle cost

• Ensure fast and easy installation

• Engineered for easy expansion and

for cost-eective upgrades

• Withstands harsh inside and outside

environmental conditions

INNOVATION

Many TE wall box solutions incorporate the latest in cutting-

edge technology, helping to deliver unmatched savings in

installation time, labor costs and performance in all ﬁber

networks.

• RapidReel ﬁber cable spool allows the cable to

payo directly from the enclosure assembly—speeds

installation and reduces labor requirements

• Reduced bend radius ﬁber eliminates attenuation caused

from macro bends; and allows for tighter slack storage

spools and promotes the use of smaller enclosure

• Low-loss MPO connectors promote the use

of easier handing and routing of cables

• Unique swing-frame design allows easy technician

access to connectors and ﬁbers forMACS

• Plug-and-play technology reduces splice labor

requirements and speeds service turn ups

QUALITY

TE strives to exceed customer expectations and is committed

to delivering the highest quality products throughout the

world. TE accomplishes this through continual improvement

in customer satisfaction, supplier relationships and our

business management system. ISO 9001 standards and

statistical process controls help to keep TE's wall box

equipment within strict speciﬁcations—serving the life of

theproduct.

5www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Products-at-a-Glance

TE Solutions for Fiber Connectivity Speciﬁcations Application

Mini Rapid Fiber Distribution

Terminal (RDT)

See page 9

Installation Type Indoor

Size (HxWxD) 7.9"x5.5"x2.4"

Fibers 12

Splice Capabilities No

RapidReel Yes

• Basements

• Premises Locations

• Campuses

• In-building

• FTTH Deployments

• Wireless Backhaul

• MSO

Rapid Fiber Distribution

Terminal (RDT)

See page 11

Installation Type Indoor

Size (HxWxD) 6"x9"x4"

Fibers 12-24

Splice Capabilities Yes

RapidReel Yes

• Basements

• Premises Locations

• Campuses

• In-building

• FTTH Deployments

• Wireless Backhaul

Small Outdoor Fiber

Distribution Terminal

See page 13

Installation Type Outdoor

Size (HxWxD) 13.5"x19"x8.25"

Fibers 48

Splice Capabilities Yes

RapidReel No

• Interconnect

• Entrance Rooms

• Basements

• Premises Locations

• LANs

• Campuses

• In-building

• FTTH Deployments

• Wireless Backhaul

• Base Station

• Security

• MSO

• OSP

• Metro Fiber Ring

Large Outdoor Fiber

Distribution Terminal

See page 15

Installation Type Outdoor

Size (HxWxD) 22"x20"x10"

Fibers 96

Splice Capabilities Yes

RapidReel No

• Cross-connect

• Interconnect

• Entrance rooms

• Basements

• Premises

• Locations

• LANs

• Campuses

• In-building

• FTTH Deployments

• Wireless Backhaul

• Base Station

• Security

• MSO

• OSP

• Metro Fiber Ring

*Outdoor rated splice boxes only

6www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Products-at-a-Glance

TE Solutions for Fiber Connectivity Speciﬁcations Application

Fiber Distribution Terminals

(iFDT)

See pages 17

Installation Type Indoor

Size (HxWxD) Varies

Fibers 12-96

Splice Capabilities Yes

RapidReel No

• Campuses

• In-building

• FTTH Deployments

• Wireless

• Backhaul

FL1 Wall Boxes

See page 19

Installation Type Indoor

Size (HxWxD) Varies

Fibers 12-72

Splice Capabilities Yes

RapidReel No

• Interconnect

• Central Oce

• Entrance Rooms

• Communications Rooms

• Indoor

FL1 6pack Adapter Packs, Splice

Trays, Hardware

See pages 21

• FL1 Wall Box Applications

Flexible Fiber Box (FFB)

See pages 24

Installation Type Indoor/Outdoor

Size (HxWxD) 10.5"x12"x5"

Fibers 24

Splice Capabilities Yes

RapidReel Yes

• Indoor/outdoor

• Basements

• Premis Locations

• Wireless Backhaul

• FTTA/FTTH/FTTCS

Fiber Splitter Box (FSB)

See pages 27

Installation Type Varies

Size (HxWxD) Varies

Fibers 16-72

Splice Capabilities Yes

RapidReel No

• FTTH Deployments

• Wireless Backhaul

• MSO

• Indoor/outdoor

FibrBoss PB06-S

See pages 36

Installation Type Indoor/Outdoor

Size (HxWxD) 5"x4"x2"

Fibers 6

Splice Capabilities Yes

RapidReel No

• Indoor/outdoor

• FTTH/FTTB

• Interconnect

FibrBoss PB06-B

See pages 37

Installation Type Indoor/Outdoor

Size (HxWxD) 4.8"x6.4"x2.4"

Fibers 6

Splice Capabilities Yes

RapidReel No

• Indoor/outdoor

• FTTH/FTTB

• Interconnect

7www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Products-at-a-Glance

TE Solutions for Fiber Connectivity Speciﬁcations Application

Outdoor Wall Mounted Small

Box (OWB-S)

See pages 38

Installation Type Outdoor

Size (HxWxD)

209.8mmx173.8mmx72mm

Fibers 4

Splice Capabilities Yes

RapidReel No

• Indoor/Outdoor

• Wall/Pole Mount

• FTTH

Rapid Fiber Faceplate

See pages 39

• Indoor

• FTTH

• Wall Mount

Customer Wall Outlet (COWO)

See pages 40

• Indoor

• FTTH/FTTD

OmniReach Transition Box with

DLX Adapters

See pages 41

• Indoor

• Wall Mount

• FTTH

Fiber Termination Unit (FTUO)

See pages 42

• Indoor

• FTTH

• Wall Mount

Customer Premises Wall Outlet

(HFTP)

See pages 43

• Indoor

• FTTH/FTTD

8www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Mini Rapid Fiber Distribution Terminal (RDT)

The mini Rapid Fiber distribution terminal (RDT) is compact, high-density, ﬁber box solution,

designed to speed installation requirements on the customer premises. Utilizing the RapidReel

ﬁber cable spool, the mini RDT deploys up to 650' (198 m) of 12-ﬁber 3 mm cable. The multiﬁber

cable terminates to a multiﬁber push-on connector (MPO), which ensures fast cable routing and

handling by technicians. For service turn-up, the mini RDT features 12- SC/APC adapter ports for

fast, plug-and-play drop cable connections.

The mini RDT is a cost-ecient system for deploying and managing ﬁber networks within small to

mid-sized multiple dwelling unit (MDU) and multiple tenant unit (MTU) environments.

FEATURES

• Compact design: 7.9 x 5.5 x 2.4 in (200 x 140 x 60 mm)

• RapidReel ﬁber cable spool deploys up to 100' (30 m) of stubbed cable

• 12-ﬁber 3 mm cable is factory terminated with a low-loss MPO connector

• Equipped with 4, 8 or 12 SC/APC adapter ports

• Plastic construction – no grounding required

• Removable cover and adapter housing

• Screw mounts to a wall or ﬂat surface

• Security screw holds cover in place

• Flexible cable routing: Distribution cable can exit from bottom or side of unit

BENEFITS

• Cost Savings: RapidReel cable spool reduces upfront deployment costs by eliminating

site survey inspections, reducing labor hours and streamlining cable requirements

• Reduced Labor: Preconnectorized plug-and-play solution eliminates

splice labor requirements and speeds network construction

• Easy Access: Technician friendly, the mini RDT provides easy

access to connectors for service andmaintenance

• Space Savings: Compact MPO connector design and multi-ﬁber cable is ideal for high density

intrafacility applications. Excess ﬁber is stored within unit, no additional enclosures are required

SPECIFICATIONS

Installation Type: Indoor

Fibers: 12

Splice Trays: N/A

Cable Ports: 1 Bottom

Rating: UL

Height: 7.9" (200mm)

Width: 5.5" (140 mm)

Depth: 2.4" (60mm)

9www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Enclosure Type

M12 Fiber plastic

Catalog Number

RDT - S M __ __ __ 0 0 __ __ __ __ __ __

Enclosure End Configuration

9900 µm - standard

Cable Count

04 4

08 8

12 12

Connector Type

JSC/APC

KLC/UPC

LLC/APC

NSC/UPC

Cable Type

DIndoor/outdoor 3.6mm black

P3 mm loose tube ivory

plenum (zipcord for 24 ﬁbers)

Stubbed End Configuration

AMPO connector

ONo connector

Fanout

JSC/APC

KLC/UPC

LLC/APC

NSC/UPC

Cable Length (Plenum)1

030 30 meters (100')

061 61 meters (200')

092 92 meters (300')

122 122 meters (400')

152 152 meters (500')

183 183 meters (600')

1External spool included for plenum cable

lengths over 650' (198 m) and indoor/

outdoor cable over 600' (183 m)

Cable Length (Indoor/Outdoor)1

015 15 meters (50')

030 30 meters (100')

045 45 meters (150')

061 61 meters (200')

076 76 meters (250')

092 92 meters (300')

107 107 meters (350')

122 122 meters (400')

137 137 meters (450')

152 152 meters (500')

168 168 meters (550')

183 183 meters (600')

198 198 meters (650')

Wall Box Solutions

Mini Rapid Fiber Distribution Terminal (RDT)

10 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Rapid Fiber Distribution Terminal (RDT)

Eliminates the need for splice cases and separate cable assemblies by integrating

the patened RapidReel ﬁber cable spool. The RapidReel cable spool includes a

built-in reel enabling quick payo of up to 500 feet of MPO stubbed 12 or 24

count optical ﬁber cable from a single 6"x 9" wall box. The MPO stub is pulled for

installation into either the collector enclosure or directly to an indoor or outdoor

ﬁber distribution hub, panel, connector or adapter with MPO compatibility. After

installation the spool ﬂanges can be broken away and the wall box is secured to

the wall safely storing the remaining slack cable. Use of factory terminated and

tested MPO connectors instead of splicing provide a plug-and-play environment

that reduces labor costs and speeds project completion.

Rapid Fiber RDT with built-in spool

FEATURES AND BENEFITS

• Built-in spool allows for easy payo of MPO stub

• RapidReel cable spool allows the cable to payo from

the complete stubbed enclosure assembly

• Break-away spool ﬂanges reduce slack storage

size to within the enclosures footprint

• Designed for indoor use

• Utilizes reduced bend radius ﬁber

• Designed to meet NEMA 12 requirements

Rapid Fiber RDT using slider adapter packs

SPECIFICATIONS

RDT-12 RDT-24

Installation Type Indoor Indoor

Fibers 12 24

Splice Trays 2/12f 2/12f

Cable Ports 2 top; 1 bottom 2 top; 1 bottom

Rating NEMA-12 NEMA-12

Height 6.0" 6.0"

Width 9.0" 9.0"

Depth 4.0" (5.5" with splice) 4.0" (5.5" with splice)

ORDERING INFORMATION

Enclosure Type

J24 ﬁber

Catalog Number

RDT- __ __ __ __ __ __ __ __ __ __ __ 2 __

Conﬁguration

SStandard

Fiber Count

12 12

24 24

Connector Type

JSC/APC

NSC/UPC

Splice Trays (only on splice boxes)

0No tray

2Heat shrink fusion

Provider Side Pigtails =(only on splice boxes)

P3 mm, 12 ﬁber fanouts with 2 mm outputs

0No pigtails, no splice trays

Cable Type

D3 mm loose tube plenum

(zipcord for 24 ﬁber)

B12 F 3 mm loose tub riser

C12F 3.6 mm loose tube indoor/outdoor

Stubbed End Conﬁguration

AMPO connectors

0No connectors

Enclosure End Conﬁguration

22 mm fanouts

0No connectors

Cable Length

100 100'

200 200'

300 300'

400 400'

500 500'

11 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Small Outdoor Fiber Distribution Terminal (oFDT)

The small outdoor ﬁber distribution terminal is designed to terminate, splice and

interconnect up to 48 ﬁber optic cables in an outdoor environment. The enclosure

is mounted to the exterior surface and connects the distribution cable and drops.

The cables meet at a central connector ﬁeld that includes termination for the

distribution cable and drop cables. The cabinet may be conﬁgured with splice

trays for splicing the cable to connector pigtails. The oFDT may be pre-terminated

on the distribution side with outside plant cable stubs so that the unit is quickly

connected. The oFDT may also be pre-wired with pigtails on the drop side so that

individual drops routed into the unit can be spliced to the connectorized pigtails.

The oFDT features a unique “swing frame” type design that separates the splicing

in the rear from the patch access in the front of the swing frame. It allows for

easy connector access to the rear connectors for maintenance and cleaning. This

approach allows for a single door sealing method, ensuring reliability to withstand

long-term outdoor conditions.

The unit accommodates a variety of OSP cable types via sealed grommet entry.

Cables are secured with standard grip clamps to provide required pull out

strength. The enclosure provides grounding for metallic members and for the

cabinet.

The oFDT product accommodates 6, 12, 24 or 48 ﬁbers. Distribution cable

ﬁbers are terminated on standard SC/APC, SC/UPC and LC/APC adapters that

are easily accessible for service connection and maintenance. Drop pigtails are

terminated on adapters adjacent to the distribution termination adapters until

services are requested.

FEATURES AND BENEFITS

• Accommodates smaller ﬁber counts; 6-, 12- and 24-ﬁber

• Eliminates need for transitional NEMA box that provides for mini-ducts

• Liquid tight ﬁttings oer cost savings

• Supplied pigtails and splice tray

• Wall-mount; ecient use of wall space

• Cable termination and splicing

• Complete connector access

• Lockable 216 tool/padlock oers ﬂexible security options

• Environmental enclosure provides heavy-duty protection

from wind, dust, rain, and other contaminants

• Aluminum welded construction provides strength and resists corrosion

• Lightweight structure provides for easy installation

• Cable entrance ports seal cable at entry

• Cable management and routing limits radius and adds strain relief

• Standard stub lengths of 100, 300, 500, and 1000 feet

12 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Small Outdoor Fiber Distribution Terminal (oFDT)

Catalog Number

FDT- __ __ __ __ __ N X __ __ __ __ 0

Enclosure

GoFDT-48 (Available with

-6, -12, -24 and -48 Fibers)

Splice Tray

0No Tray

2Heat Shrink Fusion

3Mechanical/Ribbon

Fiber Count

06 6 Fiber

12 12 Fibers

24 24 Fibers

48 48 Fibers

Stub Length

000 0 Feet (Pigtail Option)

025 25 Feet

100 100 Feet

200 200 Feet

300 300 Feet

500 500 Feet

Cable Type

Pigtails

ABare Ribbon Pigtail Assembly

B12 Fiber Software Bundle*

Stubs

SRibbon OSP w/Conn

RRibbon IFC w/Conn

TLoose Tube OSP w/Conn

VLoose Tube IFC w/Conn

OAdapters Only

*900 micron ﬁber bundled in a soft jacket.

Connector Type

Singlemode

JSC/APC

NSC/UPC

KLC/UPC

Multimode

9MMSC

6MMLC

SPECIFICATIONS

FDT-G

Installation Type: Outdoor

Fibers: 48

Splice Trays: 2 Trays

Cable Ports: 4 Bottom

Rating: NEMA-4

Height: 13.5"

Width: 19"

Depth: 8.25"

13 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Large Outdoor Fiber Distribution Terminal (oFDT)

The TE outdoor ﬁber distribution terminal is designed to terminate, splice and

interconnect up to 96 ﬁber optic cables with SC connectors, or 192 cables with

LC connectors in an outdoor environment. This terminal may be adapted to

applications by mounting the enclosure to the exterior surface and connecting

between the distribution cable and drops. The oFDT is typically divided into

two side-by-side sections with distribution cable routed into one side and drop

cable routed into the other side. The cables meet at a central connector ﬁeld that

includes termination for the distribution cable. Each side of the cabinet may be

conﬁgured with splice trays for splicing the cable to connector pigtails. The

oFDT-may be pre-terminated on the distribution side with outside plant cable

stubs so that the unit is quickly connected to the plant. The oFDT may be pre-

wired with pigtails so that individual drops routed into the unit can be spliced to

the connectorized pigtails.

The unit accommodates a variety of OSP cable types via sealed grommet entry.

Cables are secured with standard grip clamps to provide required pull out strength.

The enclosure provides grounding for metallic members and for thecabinet.

MOUNTING APPLICATIONS

All units are conﬁgurable for a variety of mounting arrangements including wall,

pole and pedestal mounting. Each unit is provided nominally with a wall mount

bracket. Optional pole-mount brackets and pedestals may be ordered separately.

FEATURES AND BENEFITS

• Environmental enclosure provides heavy-duty protection

from wind, rain, and other contaminants

• Aluminum welded construction provides strength and resists corrosion

• Flexible design accommodates 24, 48, 72 and 96 ﬁbers

• Lightweight structure provides for easyinstallation

• Lockable tool or padlock oers ﬂexible security options

• Cable entrance ports seal cable at entry

• Cable management and routing limits radius and adds strain relief

SPECIFICATIONS

FDT-F

Installation Type: Outdoor

Fibers: 96

Splice Trays: 2 Trays

Cable Ports: 3 Bottom

Rating: NEMA-4

Height: 22"

Width: 20"

Depth: 10"

14 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Large Outdoor Fiber Distribution Terminal (oFDT)

Enclosure

oFDT-96 (Available

with -24, -48, -72

and -96 Fibers)

Splice Tray

0No Tray

2Heat Shrink Fusion

3Mechanical/Ribbon

Fiber Count

24 24 Fibers

48 48 Fibers

72 72 Fibers

96 96 Fibers

Catalog Number

FDT- __ __ __ __ __ NX __ __ __ __

Cable Type

Pigtails

0No Pigtails

ABare Ribbon Pigtail Assembly

B12 Fiber Softwall Bundle

Stubs

SRibbon OSP w/Conn

RRibbon IFC w/Conn

TLoose Tube OSP w/Conn

VLoose Tube IFC w/Conn

Stub Length

000 0 Feet

025 25 Feet

100 100 Feet

200 200 Feet

300 300 Feet

500 500 Feet

*900 micron ﬁber bundled in

a soft jacket.

Connector Type

Singlemode

JSC/APC

NSC/UPC

KLC/UPC

Multimode

9MMSC

6MMLC

15 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Indoor Fiber Distribution Terminals (iFDT)

The TE indoor ﬁber distribution terminal (iFDT) series provides customer premises

equipment applications with a compact and secure family of enclosures for

connecting ﬁber cables within building entrance locations, communication closets,

computer rooms and other indoor environments. The iFDT products utilize a

rugged double-hinged design that eectively isolates the splicing and cable

termination in the rear compartment from the jumper interconnection in the front

compartment. Separating the cable splicing and termination function from the

interconnection function allows the unit to be used as a dual-access product with

secure lockable access provided for eachcompartment. The layered iFDT and

staggered interconnection ﬁeld provides ease of access to allconnections.

SIZES

The iFDT products are designed to splice and terminate ﬁbers in a range of sizes

including 6, 12, 24, 48, 72, and 96 ﬁbers.

MOUNTING APPLICATIONS

The TE iFDT series cabinets are for indoor wall mount applications and are

designed to NEMA-12 rating. The dual hinged design allows complete front and

rear access. The two secure doors are locked with a standard can wrench tool

and may optionally be secured with a standard pad-lock. The unit may also be

conﬁgured for single lock entry thus allowing the products to be used for single

access applications.

FIBER MANAGEMENT

The enclosures accommodate optical component modules allowing the unit

to house splitters, WDMs, ﬁlters and other optical components. For splicing

applications, TE's splice trays can be installed to support either individual fusion

splicing or mass fusion splicing. The units provide sealed cable ports for cables

and interconnection cables and gaskets to protect against dust and water spray.

The units can also be conﬁgured with a standard cable grip kit to provide strain

relief for incoming ﬁber cables. The splice compartment provides ample space for

storing loose-tube, ribbon or individual ﬁber slack.

FEATURES

• 12-Packs provide for high-density terminations and conserve wall space.

• Integrated splice tray oers ﬂexible splice

management for individual or mass splicing.

• Sealed enclosure protect ﬁbers from dust, water

spray, insects and other contaminants.

• Dual-hinged design ensures separation of owner/client network segments.

• Designed to NEMA-12

• Front and rear layer maximizes wall space utilization

for both splicing and interconnect.

• Robust steel construction protects ﬁbers against

damage and ensures network reliability.

• Slotted cable entrance ports allow for rapid cable

installation and pass-through capability.

• Cable management and routing limits bend radius and adds strain relief.

• 216-Tool (can wrench), key lock or padlock oers ﬂexible security options.

16 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Indoor Fiber Distribution Terminals (iFDT)

Catalog Number

FDT- __ __ __ __ __ N X __ __ __ __ 0

Enclosure Type/Capacity

AiFDT-12 12 Fiber

BiFDT-24 24 Fiber

CiFDT-48 48 Fiber

DiFDT-72 72 Fiber

EiFDT-96 96 Fiber

Cable Type

Pigtails

ABare ribbon pigtail assy

B12 Fiber Soft-Walled Bundle*

Stubs

SRibbon OSP w/Conn

RRibbon IFC w/Conn

TLoose Tube OSP w/Conn

VLoose Tube IFC w/Conn

Stub Length

000 0 Feet

025 25 Feet

100 100 Feet

200 200 Feet

300 300 Feet

500 500 Feet

Splice Tray

0No Tray

2Heat Shrink Fusion

3Mechanical/Ribbon

Fiber Count

06 6 Fiber

12 12 Fiber

24 24 Fiber

48 48 Fiber

72 72 Fiber

96 96 Fiber

Connector/Adapter Style

Singlemode

JSC/APC

NSC/UPC

KLC/UPC

Multimode

9MMSC

6MMLC

* 900 micron ﬁber bundled in a soft

jacket.

SPECIFICATIONS

FDT-A FDT-B FDT-C FDT-D FDT-E

Installation Type: Indoor Indoor Indoor Indoor Indoor

Fibers: 12 24 48 72 96

Splice Trays: 1 Tray 2 Trays 4 Trays 6 Trays 8 Trays

Cable Ports: 2 Top; 2 Bottom 2 Top; 4 Bottom 2 Top; 4 Bottom 2 Top; 4 Bottom 2 Top; 4 Bottom

Rating: NEMA-12 NEMA-12 NEMA-12 NEMA-12 NEMA-12

Height: 7.25" 8" 18.75" 23.6" 32.5"

Width: 11.8" 14" 14.5" 14.56" 14.7"

Depth: 3.25" 5" 5" 5" 5"

17 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Indoor Fiber Wall Mount Boxes

TE's FL1 indoor ﬁber termination products include a variety of two door wall

mount box conﬁgurations. These products are designed speciﬁcally to act as part

of the ﬁber distribution system in an enterprise networkcell site backhaul network,

or as the demarcation point for the service provider at the customer’slocation.

FL1 products utilize adapter pack technology, which enables service providers to

add new subscriber connections as needed —deferring unnecessary CAPEX.

Excellent labeling, grommets, door latches and ribbon pigtail routing reinforce

the value these products bring to the physical layer of any network with higher

quality and reliability, greater operational eciencies, and networksimpliﬁcation.

FEATURES/BENEFITS

• Economical, "build-as-you-grow" solution

• Quick installation

• Compact size

• Durability

• Single catalog number ordering

• Single package shipping

TWO DOOR FIBER WALL MOUNT BOXES

The FL1 two-door, wall-mount boxes feature a unique design and many integrated features suchas:

• Multiple, conﬁgurable locking options that allow users and service providers separate access for security

• Acceptance of strength member tie-o hardware

• Acceptance of cable clamps at each corner

SPECIFICATIONS

FL1-G FL1-H FL1-J FL1-P

Installation Type: Indoor Indoor Indoor Indoor

Fibers: 12 24 48 72

Splice Trays: 1 Tray 2 Trays 4 Trays 6 Trays

Cable Ports: 2 Top; 2 Bottom 2 Top; 2 Bottom 2 Top; 2 Bottom 2 Top; 2 Bottom

Rating: NEMA-12 NEMA-12 NEMA-12 NEMA-12

Height: 11.2" (28.4 cm) 15.1" (38.4 cm) 17.7" (45 cm) 17.7" (45 cm)

Width: 13" (33 cm) 14" (35.6 cm) 17" (43.1 cm) 17" (43.1 cm)

Depth: 3.6" (9.1 cm) 3.6" (9.1 cm) 6.2" (15.7 cm) 6.2" (15.7 cm)

12-Position

18 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Indoor Fiber Wall Mount Boxes

HOW TO ORDER AN FL1 TWO-DOOR WALL MOUNT BOX

1. Select wall box type

2. Select 6pak (with or without ﬁber) installed in wall mount box

3. Select 6pak adapter type

4. Select splice tray with chip

5. Select number of cable clamps (0-9)

6. Select number of compression ﬁttings (0-9)

7. Select number of bonding grounding kits (0-9)

8. Select number of strength member tie-o kits (each wall box accepts 2, maximum) (0-9)

9. Select locks

Multimode and Singlemode

6pak Adapter/Connector Type

NBlank

Singlemode

7SC/UPC ultra polish

ESC/UPC duplex

JSC/APC angled polish

BSC/APC duplex with angled polish

8LC

Multimode

9SC

DSC duplex

6LC

Accessories

Enter quantity (0-9) above

corresponding accessory

5Cable clamp

6Compression ﬁttings

7Bonding grounding kit

8Strength member tie-o

Splice Tray with Chip

1Bare fusion

2Heat shrink fusion

3Mechanical (elastomeric)

NNone

Catalog Number

FL1- __ __ __ __ __ __ __ __ - __ __ __ __

1 2 3A 3B 3C 3D 3E 4 5 6 7 8

Wall Box Type (2-door)

G12-position termination/

splice wall box

H24-position termination/

splice wall box

J48-position termination/

splice wall box

P72-position termination/

splice wall box

6paks Installed into Wall Box

3Adapters with pigtails

(2 mm x 3 m)

4Adapters only – no ﬁber

66-ﬁber softwall bundle

(3 m (12-ﬁber for LC)

912-ﬁber ribbon (3 m)

19 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

FL1 6pak Adapter Packs

Note: All configured wall boxes will have adapter packs loaded starting from the wall side.

PLACEMENT OF 6PAKS

12-Position

Wall Mount

Type G Box Viewed

from Equipment Side

Wall Mount Side

(Rear of Box)

Door Side

Type G Box

(Viewed from Side of Box)

24-Position

Wall Mount

Type H Box Viewed

from Equipment Side

Wall Mount Side

(Rear of Box)

Door Side

Type H Box

(Viewed from Side of Box)

48-Position

Wall Mount

Type J Box Viewed

from Equipment Side

Wall Mount Side

(Rear of Box)

Door Side

Type J Box

(Viewed from Side of Box)

72-Position

Wall Mount

Type P Box Viewed

from Equipment Side

Wall Mount Side

(Rear of Box)

Door Side

DDC

Type P Box

(Viewed from Side of Box)

20 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

FL1 6pak Adapter Packs

6pak without ﬁber

6pak with ﬁber

Description

Multimode (62.5/125) - Adapter 6 Packs

SC FL2-6PMMSC

LC FL2-6PMMLC

Singlemode - Adapter 6 Packs

SC/APC FL2-6PSMASC

SC/UPC FL2-6PSMSC

LC FL2-6PSMLC

Multimode (62.5/125) with 3 Meters of Fiber

SC FL1-6P9BC003

LC FL1-6P6BC003

Singlemode with 3 Meters of Fiber

SC/UPC FL1-6P7SC003

SC/UPC angled 8° FL1-6PJSC003

LC FL1-6P8SC003

10G 6paks – with 50/125 µm Laser Optimized Multimode Pigtails*

10G Multimode LC (aqua), with 3 meter 12 ﬁber stranded pigtails FL2-6P6JC603W

10G Multimode SC (aqua), with 3 meter 6 ﬁber stranded pigtails FL2-6P9JC603W

6paks - Singlemode Pigtails and adapters

Singlemode LC (blue), with 3 meter 12 ﬁber stranded pigtails FL2-6P8SC603W

Singlemode SC/APC (blue), with 3 meter 6 ﬁber stranded pigtails FL2-6P7SC603W

* 10G 6paks utilize 50/125 µm laser optimized multimode to 300

meters or OM3 rated glass and aqua colored adapters.

6pak Adapter

(With SC Adapters and Pigtails)

6pak Adapter — Adapters and Pigtails

FEATURES

• Flexibility for future growth: To add capacity to an existing

FL1 wall box, simply order the appropriate 6pak

• Can be purchased and installed as growth necessitates

• Available with preterminated three-meter pigtails

• Pigtails consist of a single outer jacket containing

six color-coded 900 µm ﬁbers

• One end of pigtail terminated with chosen connector

style and installed into the 6pak adapter

• Saves installation time

ORDERING INFORMATION

21 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

FL1 6pak Adapter Packs

6pak Connector Plug-Ins and Accessories

FEATURES

• Completely interchangeable between FL2000 panel and wall box products

• Can be ordered with all standard types of simplex and duplex

single and multimode adapters and connectors

• Feature TE's removable angled retainers which provide superior

ﬁber management

• No tools required to install into FL2000 boxes or panels

6pak plug-in (shown with

singlemode simplex adapters)

6pak plug-in (shown with

multimode simplex adapters)

6pak plug-in (shown with

singlemode duplex adapters)

6pak plug-in (shown with

multimode duplex adapters)

6pak Adapter-Only

(Without Fiber)

Description Catalog Number

Multimode (62.5/125)

SC FL2-6PMMSC

SC (aqua) OM3 50/125 FL2-6PMMSC-A

LC FL2-6PMMLC

LC (aqua) FL2-6PMMLC-A

Singlemode

SC FL2-6PSMSC

LC FL2-6PSMLC

6pak blank plug in FL2-6PBLNK

Compression ﬁtting FL1-ACC001

Compression ﬁtting with plate FL1-ACC006

Strength member tie-o kit FL1-ACC003

Cable clamp FL1-ACC011

Bonding grounding kit FL2-ACC004

Locks

Lock and Key Type A IPA-K1

Lock and Key Type B IPA-K2

Mini-splice tray (used only in 12-position, wall-mount box)

Bare fusion FL1-M-FT

Heat shrink (single ﬁber fusion) FST-M-HS

Mechanical (mass fusion) FST-M-MT

Standard splice tray

Bare fusion FST-FT

Heat shrink fusion (single ﬁber fusion) FST-HS

Mechanical (mass fusion) FST-MT

ORDERING INFORMATION

22 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Flexible Fiber Box (FFB)

Fixed FFB

Fixed FFB with Internal Demarc Door

Rapid Fiber FFB

TE Connectivity’s (TE) ﬂexible ﬁber box (FFB) is designed to address the unique

challenges of indoor, outside plant and ﬁber installations. Available in two unique

base conﬁgurations, ﬁxed and Rapid Fiber, the FFB promotes true ﬂexibility

with easily interchangeable components for termination, sliding adapter pack,

ﬁxed bulkhead, splice, MPO and hardened multiﬁber optical connector (HMFOC)

conﬁgurations.

The Rapid Fiber FFB system leverages TE’s RapidReel ﬁber cable spool to payout

ﬁber directly from the enclosure. By enabling faster cable routing and installation,

the ﬁber cable spool helps to minimize overall labor costs. In addition, the spooling

system reduces the need for site survey inspections, and simpliﬁes cable ordering

and inventory requirements. Any excess cable stores easily back on to the spooling

system, eliminating the need for additional slack storage equipment.

The ﬁxed FFB system uses an assortment of ﬁxed conﬁguration plates to mix-and-

match dierent cable and connector types. One half of the box manages feeder

cable connections; the other half manages drop connections. To meet co-location

requirements, the feeder side of the box is available with a lockable cover.

TE’s ﬂexible ﬁber box series incorporates the latest in cutting-edge technology, helps

to deliver unmatched savings in installation time, labor costs, and oers unrivaled

performance for next generation networks..

BENEFITS

Flexibility: Designed to serve any network topology, any location,

any technology.

Protection: Built to withstand harsh environmental conditions -

including dust, moisture and UV.

Right-Sized: Enclosure meets space requirements for a variety of environments.

Performance: Reduced bend radius ﬁber cable reduces attenuation caused by

tight bends and frequent handling.

Easy Installation: Mounts on a wall, pole or other ﬂat surface with minimal tools.

SPECIFICATIONS

Installation Type Indoor/Outdoor

Fibers 24

Splice Trays 2 Trays

Cable Ports 4 Bottom

Rating NEMA-4, UL

Height 10.5" (.26 m)

Width 12" (.3 m)

Depth 5" (.12 m)

23 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Flexible Fiber Box (FFB)

Preconfigured Rapid Fiber FFB

Preconﬁgured Rapid Fiber FFB units are available to ship from the factory with preinstalled RapidReel ﬁber cable spools,

sliding adapter packs, splice trays and/or preterminated cable assemblies, and help to simplify the ordering process and

reduce installation time and cost.

Rapid Fiber FFB – LC or SC Connectors

Rapid Fiber FFB - Splice Tray

FFB with external ﬁber spool.

XXX=

031

061

076

092

123

153

183

213

244

274

305

100' Spooled (31 m)

200' Spooled (61 m) 24 Fiber requires ext. spool

250' Spooled (76 m) 24 Fiber requires ext. spool

300' Spooled (92 m) with ext. spool

400' Spooled (122 m) with ext. spool

500' Spooled (153 m) with ext. spool

600' Spooled (183 m) with ext. spool

700' Spooled (213 m) with ext. spool

800' Spooled (244 m) with ext. spool

900' Spooled (274 m) with ext. spool

1000' Spooled (305 m) with ext. spool

NOTE: The FFB is available with a maximum of 1000' of

spooled cable.

ORDERING INFORMATION

Description Cable Type Fibers Connector Type Part Number

Rapid Fiber FFB

Sliding Adapter Pack

Option

Singlemode

12 LC-MPO FFB-R012ESKSSDUXXX

SC-MPO FFB-R012ES7SSDUXXX

24 LC-MPO FFB-R024ESKSSDUXXX

SC-MPO FFB-R024ES7SSDUXXX

Multimode

12 LC-MPO FFB-R012MSCSSFUXXX

SC-MPO FFB-R012MSTSSFUXXX

24 LC-MPO FFB-R024MSCSSFUXXX

SC-MPO FFB-R024MSTSSFUXXX

Rapid Fiber FFB

Splice Option

Singlemode

12 MPO (far end) FFB-R012ES22SDUXXX

Stub (far end) FFB-R0120S22SDUXXX

24 MPO (far end) FFB-R024ES22SDUXXX

Stub (far end) FFB-R0240S22SDUXXX

Multimode

12 MPO (far end) FFB-R012MS22SFUXXX

Stub (far end) FFB-R0120S22SFUXXX

24 MPO (far end) FFB-R024MS22SFUXXX

Stub (far end) FFB-R0240S22SFUXXX

24 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Replace X with "D" to include internal demarc door, or "0" to exclude door.

Preconfigured Fixed FFB

Preconﬁgured ﬁxed FFB units are available to ship from the factory with preinstalled connectors, adapter packs, splice trays,

cables and/or preterminated pigtail assemblies, and help to simplify the ordering process and reduce installation time and

cost.

ORDERING INFORMATION

Product Description Fibers Connector Type Part Number

Feeder: MPO

Drop: Sliding Adapter Type

LC FFB-F012EMSKSSDDUX

SC FFB-F012EMS7SSDDUX

LC FFB-F024EMSKSSDDUX

SC FFB-F024EMS7SSDDUX

Feeder: HMFOC

Drop: Sliding Adapter Type

LC FFB-F012UMSKSSDDUX

SC FFB-F012UMS7SSDDUX

LC FFB-F024UMSKSSDDUX

SC FFB-F024UMS7SSDDUX

Feeder: Splice

Drop: VAM

(Order VAM modules

separately. See the full

catalog for details.)

12 – FFB-F01222SOVS0000

24 – FFB-F02422SOVS0000

Feeder: External HMFOC Input with

Demarc Door

(Sliding Adapter Type

Shown)

LC FFB-F01200HKSSDDUD

SC FFB-F01200H7SSDDUD

LC FFB-F02400HKSSDDUD

SC FFB-F02400H7SSDDUD

Feeder: Splice

Drop: Sliding Adapter Type

LC FFB-F01222SKSSDDUX

SC FFB-F01222S7SSDDUX

LC FFB-F02422SKSSDDUX

SC FFB-F02422S7SSDDUX

Feeder/Drop: Fixed Adapter Type

in Center

LC FFB-F012KCSK0SA00X

SC FFB-F0127CS70SA00X

LC FFB-F024KCSK0SA00X

SC FFB-F0247CS70SA00X

Feeder: MPO

Drop: Fixed Adapter Type Plate

LC FFB-F012EMSKFSDDUX

SC FFB-F012EMS7FSDDUX

LC FFB-F024EMSKFSDDUX

SC FFB-F024EMS7FSDDUX

Wall Box Solutions

Flexible Fiber Box (FFB)

25 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Fiber Splitter Box (FSB)

TE's ﬁber splitter box (FSB) enables service providers to accelerate their

deployments more eectively and is an ideal solution when deploying networks in

customer premisesapplications.

These wall boxes provide a small footprint for splitting, splicing and terminating

and are environmentally rated for indoor or outdoor use. Available in three sizes,

each box is equipped with a 12-ﬁber splice tray allowing for an input splicing

option. FSB’s accept standard plug and play (PNP) splitters and splitters can be

easily added after the wall box has been installed. FSB’s accommodate 1x4, 1x8,

1x16 and 1x32 splitters; up to 72 ﬁbers.

FSB’s oer increased eciency within distinct FTTX network applications.

Featuring a compact solution for wall mounting, these boxes provide a signiﬁcant

space savings while maintaining hand access to connectors. The unique swing

frame design also allows for easy access to the back section of the wall box.

FSB’s small size and ﬂexible mounting options oer easy integration into cell

sites and huts—providing on-demand capacity for wireless backhaul applications.

For serving facilities in rural locations, i.e. strip malls, FSB’s oer an economical

solution where installing larger sized FDH’s may be unfeasible.

FSB-16 - Indoor or Outdoor Enclosure

FEATURES AND BENEFITS

• Accommodates up to 16 ports

• Rated for indoor or outdoor use

• Traditional swing frame design allows for access

to the back section of the wall box

• Splitter can be easily installed after wall box install

• Standard 12-ﬁber splice tray allows for input

splicing option

• Output pigtails can either be stored internally

or routed externally

• Accepts standard PNP splitter

26 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Fiber Splitter Box (FSB)

FSB-72 – Outdoor Enclosure

FEATURES AND BENEFITS

• Traditional swing frame design allows for access

to the back section of the wall box

• Splitter can be easily installed after wall box install

• Standard 12-ﬁber splice tray allows for input

splicing option

• Accommodates up to 3 PNP splitter modules

• 72 port capacity with built-in 32-port parking

• Easily wall mounts to buildings

• Accepts standard PNP splitter

SPECIFICATIONS

FSB-16 (H) FSB-32 (B) FSB-72 (G)

Installation Type Indoor/Outdoor Indoor Outdoor

Fibers 16 32 72

Splice Trays 1/12f 1/12f 5/12f

Splitter/WDM Ports 1 1 3

Rating NEMA-4 NEMA-12 NEMA-4

Height 9" 8" 13"

Width 9" 13" 19"

Depth 3.5" 5" 10"

FEATURES AND BENEFITS

• Dual hinge design creates separation between rear splitter section

and front customer sideaccess

• Splitters can be easily installed after wall box install allowing for

separate purchase

• Standard 12-ﬁber splice tray allows for input splicingoption

• Accommodates up to 32 splitter ports for one splitter module

• Dual hinge provides small footprint on the wall while

maintaining excellent hand access to connectors

• Accepts standard PNP splitter

FSB-32 – Indoor Enclosure

27 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Fiber Splitter Box (FSB)

Connector Type

JSC/APC

NSC/UPC

Splice Tray (Feeder Side)

2Heat Shrink Fusion

3Mechanical/Ribbon

0No Splice Tray

Fiber Count (Distribution)

12 12 Fibers

16 16 Fibers

32 32 Fibers

48 48 Fibers

72 72 Fibers

Splitter Type Installed

0None Installed

A1x32 Standard

C1x16 Standard

J1x8 Standard

LDual 1x8 Standard

MDual 1x16 Standard

N1x4 Standard

P2x16 Standard

UDual 1x4 Standard

Enclosure Type

Code Description Capacity Size

(HxWxD)

BIndoor FSB-32 32-Fiber 8"x13.5"x5"

GOutdoor FSB-72 72-Fiber 13.5"x19"x8"

HIndr/Outdr

FSB-16 16-Fiber 9"x9"x3.7"

Cable Type (Feeder Cable)

Adapters

0Adapters Only

(No Pigtail for Feeder)

Pigtails

ASplice-Ribbon Pigtail Assy

CSplice-Pigtails

(900 Micron)

Stubs

SRibbon OSP Cable

RRibbon IFC Cable

TLoose Tube OSP Cable

VLoose Tube IFC Cable

M900um IFNR Cable

Catalog Number

FSB- __ __ __ __

__ __ __

1 432 6 7 8 9 10 115

Feeder Cable Length

000 0 Feet

025 25 Feet

100 100 Feet

200 200 Feet

300 300 Feet

500 500 Feet

Feeder Fiber Count

0No Stub

22 Fibers

44 Fibers

66 Fibers

88 Fibers

Key Locks

0None (Pad Lock Ready)

AFront Lock 1, Rear Lock 1

BFront Lock 1, Rear Lock 2

CFront Lock 1, No Rear Lock

DRear Lock 2, No

Front Lock

Splitter Qty Installed

0None

1One (1) Installed

2Two (2) Installed

3Three (3) Installed

Conﬁguration

SStandard

28 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Premises Patch and/or Splice Enclosure - FibrBoss PB 06-S

The FibrBoss PB06-S premises splice enclosure is designed for low count indoor

or outdoor splicing applications. This product is wellsuited as a demarcation splice

point between the service provider and customer or for “hando” splicing of

ﬁbers whereby the service provider supplies ﬁbers for use by a third party. This

compact enclosure design includes a rugged plastic housing with a single covered

ﬁber management tray for both ﬁber storage and splice storage. Cable retention

brackets are integrated into the tray and splice protection sleeves are included with

the enclosure for added customer convenience and eciency.

FEATURES AND BENEFITS

• Intended as a small splice or ﬁber “hand-o” enclosure

• UL listed and UV resistant enclosure

• Tie-wrap door security is standard

• Small size (5” x 4” x 2” interior dimensions)

• Accommodates ﬁeld supplied ﬂ at or round drop cable inputs

• Accommodates ﬁeld or factory supplied pigtail outputs

• Fiber storage and splices integrated on one tray – tray cover included

• Six position splice sleeve holder on tray

• Six splice sleeves included

• Output pigtails are optional

Catalog Number

F - PB06 - SA2 - R __ __ - __ __ __ __ __ - O __

Pigtail Count

N N No pigtails

0 2 Two pigtails

0 4 Four pigtails

0 6 Six pigtails

Connector Type

N N None

S 1 SC/UPC

S 2 SC/APC

L 1 LC/UPC

L 2 LC/APC

Pigtail Length (Meters)

0 0 No pigtail

0 1 1 m pigtail

0 3 3 m pigtail

0 6 6 m pigtail

Pigtail Packaging

NNo pigtails

2Pigtails included, not installed

Pigtail Type

NNo pigtails

B1.8 mm OFNR cord

Pigtails are only included when option 3 in “Pigtail Packaging” is selected.

29 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Premises Patch and/or Splice Enclosure - FibrBoss PB 06-B

The FibrBoss PB06-B six-connector ﬁber premises box is intended to be used to

patch and splice up to six ﬁbers in an environmentally secure housing in an indoor

or outdoor wall mounted application. Incoming ﬁber optic cables up to 10mm OD

can be accommodated by this enclosure. This compact design includes a rugged

plastic housing with a combination patching (top) and splicing (bottom) tray. The

patching features of the tray include bend controls and integrated ﬁber retention

clips for proper pigtail management. The splicing features of the tray include a

covered ﬁber management tray for both ﬁber storage and splice storage. Cable

retention brackets are integrated into the tray, and splice protection sleeves are

included with the enclosure for added customer convenience and eciency.

FEATURES AND BENEFITS

• Intended as a small patch and splice or ﬁber “hands-o” enclosure

• UL listed and UV resistant enclosure

• Small size (4.8” x 6.4” x 2.4” interior dimensions)

• Accommodates ﬁeld supplied ﬂat or round drop cable inputs

• Accommodates ﬁeld supplied cable and pigtail outputs

• Fiber storage and splices integrated on one tray – tray cover included

• Six position splice sleeve holder on tray

• Six splice sleeves included

• Mounting features for wall, pole, or pedestals

• Optional security screw for the ﬁber tray for use as a demarcation enclosure

(contact customer service)

Catalog Number

F - PB06 - BC2 - R __ __ - __ __ __ __ __ - O __

Pigtail Count

N N No Pigtails

0 2 Two Pigtails

0 4 Four Pigtails

0 6 Six Pigtails

Connector Type

N N None

S 1 SC/UPC

S 2 SC/APC

L 1 LC/UPC (Limited to

6 pigtails total)

L 2 LC/APC (Limited to

6 pigtails total)

Number of Adapters

(and pigtails if selected)

0 0 No Pigtails

0 1 One-Meter Pigtails

Pigtail Packaging

NNo Adapters, No Pigtails

2Adapters and Internal Pigtails

Included and Installed

5Adapters Included and

Installed, No Pigtails

Pigtail Fiber/Cable Type (Singlemode)

NNo Pigtails

A900um Buer, Color Coded

(Internal Pigtails Only)

30 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - OWB-S (Outdoor Wall Mounted Small Box)

OWB-S (Outdoor Wall Mounted Small Box)

The OWB-S is a small wall-mountable ﬁbre box, providing an environmental

and mechanical protection for the ﬁbre management system that includes the

functions of storage, splicing, patching and passive component integration. This

product is designed for wall location, typically used as a premises connection

device in FTTH networks, but can also be used in other outdoors above-ground

applications. A variety of possible conﬁgurations are accommodated.

FEATURES AND BENEFITS

• Compact size

• High seal rate: IP65

• LSZH & UV resistant

• Hinge + latch design allows easy access

• Multiple cable entry points

• Wall or pole mountable

• Optional padlock

CABLE PORT

3x5.4mm (ﬁgure 8) 1 on top + 1 on bottom

OD up to 5mm 1 on rear + 4 on bottom

OD up to 10mm Each on both sides

Catalog Number

OWB - S - _ _ - __ _ - __ - _

Splice type

NNo splicing application

RRECORDsplice

mechanical splice

SFusing splice

Splitter integrated

NN None

Mounting Kit

NNone

WWall mounting kit

PPole mounting kit

Number of splice protector

0-12

Number of splice protector

S1 SC/UCP

S2 SC/APC

NN None

Number of adapters

0-4

ORDERING INFORMATION

DIMENSIONS (MM)

SPECIFICATIONS

Installation Type Outdoor

Fibers 4

Splice Trays 1/12f

Cable Ports 1 top; 3 Bottom

Rating IP65 seal rate; LSZH & UV resistant

Height 209.8 mm

Width 173.8 mm

Depth 72 mm

31 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - Rapid Fiber Faceplate

Rapid Fiber Faceplate

The Rapid Fiber faceplate incorporates a unique spooling system for integrated cable

storage, with the ability to store up to 30 meters of 1.2 mm cable behind a low proﬁle

wall outlet. The 1.2 mm cable is terminated to a low loss SCA connector terminated

at the outer end with a small proﬁle dust cap / hauling eye solution for internal cable

hauling. The inner end of the cable is presented within a low loss SCA adapter with

integrated laser safety shutter.

BENEFITS

• Greatly reduces time to install and removes craft sensitivity

• Removes the need for ﬁeld termination at time of customer connect

• Reduces inventory items, utilizing only standard items

• Removes the need for extensive site survey

• Simple installation technique, no specialist tools required

• Compatible with multiﬁber pass through cables up to 8 mm diameter

• Cables up to 4.8 mm* can be accommodated within the faceplate

FEATURES

• Up to 30 m of internal cable storage facility

• Integrated SCA dust cap / hauling eye

• Suitable for cavity mount installations or surface mount installation

• 1.2 mm G657.B3 micro cable technology

• Accommodates up to 2F splice tray incorporated into base of the faceplate

• Integrated cable pass-through functionality

• Standalone faceplate or supplied with 30 or 60 m of pre-terminated 1.2 mm cable

• *Limited routing options available

ORDERING INFORMATION

Catalog Number

RFP - __ - __ __ - __ __ - __ - __ - __ - __ __

Spool Length

0No spool

30 30 meters

60 60 meters

Number of Adapters

11 adapter

Number of Fibers

0No ﬁber

11 ﬁber

Connector Type

S2 SC/APC

S1 SC/UPC

Speciﬁc Logo

TE TE logo

Adapter Type

LLow loss (0.1 dB max)

Mounting Solution

XNo mounting required

WSurface mount

CCavity mount

32 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - Customer Wall Outlet (COWO)

Customer Wall Outlet (COWO)

COWO is a ﬁber optic customer outlet that allows easy and unobtrusive

termination of ﬁber optic cables in an oce, home or communications

room.

FEATURES AND BENEFITS

• Accommodates two termination/splice connections

–2 SC simplex or 1 LC duplex adapters

–2 crimp, mechanical or heat shrink splices

• IP20 rated

• Very ﬂat design, mounts on a standard ﬂush mount electrical outlet

• Utilizes reduced bend radius ﬁber (G657.a and B)

• Possibility to invert the adapter in the holder to

prevent disconnection when pulling the patch cords

• RoHS compliant

• Conforms to UL 94 V-O

• Lockable with screw or lead-wire seal

• Cable entrance from the bottom, left and rear

• Made of molded plastic (halogen free, LSZH-1), white (RAL 9010)

TECHNICAL DATA

Number of input cable positions 4

Input cable diameter 3-7 mm

Max. capacity 2 ﬁbers

Max. number of customer feeds 2 patch cords

Operating temperature -40°C to +70°C

Material PC-FR

Catalog Number

COWO - ____ __ __

Connector type

S1 SC/UPC

S2 SC/APC

L1 LC/UPC

L2 LC/APC

NN None for cable splicing

Number of pigtails

Number of adapters

ACCESSORIES

For cable splicing, a strain relief can be installed instead of an adapter at the same position.

FTX-7029 1 900-30 Strain Relief for TWO cable up to 3,0mm diameter

FTX-7029 1 900-50 Strain Relief for ONE cable up to 4,2mm diameter

ORDERING INFORMATION

33 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - Transition Box with DLX Adapters

Transition Box with DLX Adapters

DESCRIPTION

This outside plant transition box oers the ultimate “plug-and-play” solution

for durable and reliable service connection in the outside plant/drop segment

of the network. The technician-friendly design greatly simpliﬁes installation and

maintenance by minimizing splicing required at the customer’s premises.

The cost-eective solution provides lower overall installed costs throughout the

FTTX network. Rather than having to break a splice, technicians can troubleshoot

or perform routine maintenance by simply unplugging a connector

FEATURES AND BENEFITS

• Accommodates up to two DLX - terminations

• Made of molded plastic (UL94-V0)

• IP54 rated

• Wall- or Pole mount

• Utilizes reduced bend radius ﬁber (G657.A and B)

• Lockable with screw or lead-wire seal

• Cable entrance from bottom and rear

TECHNICAL DATA

Number of input cable positions:: 2

Input cable diameter: 3-5mm

Maximum capacity: 2 ﬁbres

Material: Polystryrol-blend (ASA)

Color: RAL 7032 light grey

Operating temperature: -30° C to +70° C

Environmental Characteristics: IP54 rated

RoHS compliant

Dimensions (H x W x D): 90 x 63 x 50 mm

Description

Product Catalog Number

Transition box

1 DLX hardened connector FTX-7029 1 007-01

2 DLX hardened connector FTX-7029 1 007-02

ORDERING INFORMATION

34 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - FTUO (Fiber Termination Unit Outdoor)

FTUO (Fiber Termination Unit Outdoor)

This box is typically used as a transition point where the OSP cable is spliced to

an indoor cable.

FEATURES AND BENEFITS

• Compact enclosure (168 x 132 x 33 mm)

• The box allows the installation of ﬁbers with a minimum

bend radius of 25 mm over a length of 2m.

• In-line and butt conﬁguration possible for main cable

• Universal splice holder for 8 splices: SMOUV, ANT, RECORDsplice.

• Ready for TE Connectivity OCC1 splitter installation

• Cable inlet is provided at the bottom left

side. Optionally the main cable can continue

at the top left side. (wraparound pass-through)

• Cable outlet ports (max. 2 cables) are provided

at 5 sides: left, right, top, bottom, back

• IP 43 when cable enters from bottom;

• IP40 when cable enters from top

• Impact rating: IK08

• UV resistant housing

• Standard colour: RAL7035 grey

• Gasventing provided

• Locking with screw, optionally security seal

• Main cable up to 12 mm diameter

• Drop cable up to 5 mm diameter

KIT CONTENT:

– Box with base, ﬁber organizer, cover

– Main cable seal + tiewraps + foam

– Drop cable seals for 2 drops and

cable ﬁxation accessories

– Universal splice holder for 8 splices

(SMOUV, ANT, RECORDsplice)

Catalog Number

FTUO - _ - _ - __ - 1

Connector type

Msize = medium

Number of pigtails

Splice holder type = Universal

splice holder (for SMOUV, ANT,

RECORDsplice), 8 splices

Number of adapters

ACCESSORIES

FTUO-USEAL-01 additional main cable seals (MOQ/SPQ = 500 pcs)

FTUO-OSEAL-01 additional drop cable seals (MOQ/SPQ = 1000 pcs)

CPWO-LABEL-7035-(1000) security label to cover the access screw (RAL7035 colour) (MOQ/SPQ = 1000 pcs)

ORDERING INFORMATION

35 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Wall Outlets - Customer Premises Wall Outlet (HFTP)

Customer Premises Wall Outlet (HFTP)

The HFTP is a compact ﬁber wall outlet for use at the ﬁnal ﬁber termination point in the

customer premises. The HFTP provides mechanical protection and managed ﬁber control

in an attractive format suitable for use inside customer premises. A variety of possible

ﬁber termination techniques are accommodated.

FEATURES AND BENEFITS

• Splicing to factory terminated pigtails

• Positive ﬁber management

• Direct termination with ﬁeld installable connectors

• Attractive design for indoor use

• Can hold up to 4 mechanical splices (RECORDsplice) and fusion splice protectors

(SMOUV and ANT) and mechanical SC connectors can be integrated as well

• Splice cable to cable

• Compatible with 2 SC Simplex adaptors

• Multiple cable entry points (cable diameter ≤ 6mm)

• Can be wall mounted and mounted on wall boxes with ﬁxation points of 60mm

• Laser safe with individual shutters

Catalog Number

HFTP - NO - __ __ __ __ - __

Connector type

S1 No pigtails

S2 Two pigtails

NN Four pigtails

L1 LC/UPC

L2 LC/APC

LN No pigtails and adaptors

but with LC shutters

Number of pigtails

4(LC only)

Number of adapters

Mounting kit

EExpansion screws

ACCESSORIES

CPWO-LABEL-(1000) Access screw cover and security label (MOQ/SPQ = 1000 pcs)

NOTE

HFTP-N0-NN00-E and HFTP-N0-LN00-E have an MOQ of 10 pcs

All other items have an MOQ = SPQ = 300 pcs

Packaging: 10 pieces per box

36 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Accessories

Fiber Connector/Adapter Cleaning Kit

The ﬁber connector/adapter cleaning kit contains all the items required to

adequately clean ﬁber connectors and adapters. The performance of an optical

ﬁber system is largely dependent on the ﬁber connector cleaning procedures

followed prior to installation. It is suggested that all the connectors and adapters

be cleaned before making any connections. The kit cleans approximately 500

connectors or adapters.

Description Catalog Number

Fiber connector/adapter cleaning kit FPC-CLNKIT

Includes:

• Instruction sheet

• Lint-free wipes

• Isopropyl alcohol

• Cotton swabs

• Lint-free pipe cleaners

• Oil-free compressed air

This kit contains ﬂammable alcohol and compressed air. For this reason, it can be shipped by

surface method only.

Cleaning Kit

ORDERING INFORMATION

37 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Accessories

ORDERING INFORMATION

Product Description Image Quantity Catalog Number

Optical Fiber Inspection and Cleaning Kit for Standard Connector Styles (LC, SC, ST, FC), MT-RJ,

and MPO.

Kit includes everything needed to perform routine ﬁber maintenance and troubleshooting -

including cleaning tools, an inspection microscope, a visual fault locator, and a CD-ROM with

detailed inspection, cleaning instructions and a rugged carrying case. Kit components:

A 1 2064651-1

Visual Fault Locator (VFL)) with 1.25 MM Adapter B 1 1828352-2

200x Microscope with 2.5 mm Adapter C 1 1754767-1

1.25 mm (LC) Microscope Adapter D 1 1754765-1

MT-RJ Microscope Adapter E 1 1754768-1

MPOA Microscope Adapter F 1 1828837-1

MPO Microscope Adapter G 1 1828836-1

Termination Training, CD-ROM H 1 2064710-1

2.5 mm Stick Cleaners (10/package) I 5 1918807-1

1.25 mm Stick Cleaners (10/package) J 5 1918808-1

One Slot Reel Cleaner K 1 1918803-1

MT-RJ w/pins Reel Cleaner L 1 1918804-1

SC in Bulkhead Cleaner (IBC) M 1 2064499-1

LC IBC N 1 2064500-1

MPO IBC O 1 1918809-1

Premium Hard Case P 1 TBD

Fiber Inspection Kit

38 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Wall Box Solutions

Accessories

Accessories – Protective Tubing Cutting Tool

The protective tubing cutting tool is used to score the protective tubing so the

tubing can be cut to the appropriate lengths for the ﬁnal installation.

Accessories – Grounding Kit

Kit used to ground armored fiber cable.

2 Securing Nuts

Top

Base

Bullet Ground

Connector

Set Screws

10-24 Screw

Cable Assembly Lug

Grounding Kit

(GAK-FEC001 Shown)

Grounding Kit

(GND-STPKIT Shown)

#6 Ground Cable

Grounding/Moisture Blocking Kits

Kit used to properly block gel filled stranded and ribbon cables.

ORDERING INFORMATION

Product Description Catalog Number

Protective tubing cutting tool BLK-BK0TUB

ORDERING INFORMATION

Product Description Catalog Number

Grounding kit for;

Armored OSP cable

Includes:

One cable assembly lug type ground kit

One #6 ground cable 229 mm (9") long

GAK-FEC001

Any armored loose tube or buer tubed ﬁber

OSP cable

Includes:

One bullet ground connector

One #6 ground cable 127 mm (5") long

GND-STPKIT

Frame mount conﬁguration

Any armored loose tube or buer tubed OSP cable

Includes:

One bullet ground connector

One #6 ground cable 305 mm (12") long

FEC-ACCGND02

ORDERING INFORMATION

Product Description Catalog Number

Grounding/Moisture blocking kit;

Includes components for grounding and blocking gel ﬁlled ﬁber

cables: blocking gel, heat shrink and grounding accessories

FBK-0SP002

Moisture blocking kit;

Includes components for blocking gel ﬁlled

ﬁber cables: syringe, blocking gel

BLK-MSTRKIT

39 www.te.com/bns 1-800-366-3891 x73000 Fax: 1-952-917-3237 12/14 109756.2AE

Accessories – Splice Protector Sleeve

The splice protector sleeve is constructed to protect a splice post fusion. It is

made from heat shrinkable material and contains a built-in strength member for

physical protection of the fusion splice. The splice protector sleeve is placed on

the ﬁber before making a splice, moved over the splice when the splice fusion is

complete and shrunk into place. They are available in either single ﬁber or mass

fusion sleeves.

Accessories – 216 Tools – Can Wrench Keys

Splice Protector Sleeve

(FST-ACC001 Shown)

ORDERING INFORMATION

Product Description Catalog Number

Splice protector sleeve for

Single ﬁber – single fusion; 60 mm (2.4") length, 1 each FST-ACC001

Single ﬁber – single fusion; 40 mm (1.6") length, 1 each FST-ACC005

12-ﬁber – mass fusion – heat shrink; 40 mm (1.6") length, 1 each FST-ACC006

ORDERING INFORMATION

Product Description Catalog Number

Nickel plated brass can wrench key

For use in loosening/tightening security screws OSP-216BKEY1

Aluminum can wrench key

For use in loosening/tightening security screws OSP-216BKEY2

Plastic can wrench key

For use in loosening/tightening security screws OSP-216BKEY3

Wall Box Solutions

Accessories

P.O. Box 1101

Minneapolis, Minnesota

USA 55440-1101

Tel: 1-800-366-3891 x73000

1-952-917-3000

Fax: 1-952-917-3237

www.te.com/bns

CATALOG

BROADBAND NETWORK SOLUTIONS /// WALL BOX SOLUTIONS

te.com

TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products

and/or company names referred to herein might be trademarks of their respective owners.

The information given herein, including drawings, illustrations and schematics which are intended for illustration

purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or

completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be

as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE

Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use

or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the

suitability of each such product for the speciﬁc application.

106756.2AE 12/14 Revision

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TE Connectivity Divested:

1435797-3