> Literature
> 3010 Series General
Purpose VRS Sensors
> 3015 Series General
Purpose VRS Sensors
> 30X9 Series High
Resolution VRS
Sensors
> 304X Series High
Resolution VRS
Sensors
> 30X4 Series High
Resolution VRS
Sensors
> 3070/3090 Series
Explosion Proof VRS
Sensors
> 2015/2025/2030/2040
Series Molded VRS
Sensors
> 3040 Series Power
Output VRS Sensors
3030 Series M16 [5/8 in] High Output VRS Sensors
For speed sensing applications where higher
output voltages are needed. Performs best at low
to medium speeds with medium to high
impedance loads.
Optimum Actuator: 20 DP (Module 1.27) Ferrous Metal Gear
Test Condition: A
VP/P
Specifications
Parameter Value
Output Voltage 190V P-P min.
Coil Resistance 191 Ohm to 1200 Ohms
Pole Piece Diameter 2,69 mm [0.106 in]
Minimum Surface Speed 10 IPS (0.25 m/Sec.) Typical
Operating Temperature Range -55 °C to 120 °C [-67 °F to 250 °F]
Inductance 450 mH max.
Gear Pitch Range 24 DP (Module 1.06) or Coarser
Maximum Operating Frequency 15 KHz Typical
Vibration Meets Mil-Std 202F Method 204D
Sensors with 5/8-18 UNF-2A Mounting Thread*, MS3106
Connector
Dimensions
Part Number Thread Length Weight
3030AN 28 mm [1.1 in] 70 g [2.5 oz]
3030AN25 63 mm [2.5 in] 84 g [3.0 oz]
3030AN30 76 mm [3.0 in] 84 g [3.0 oz]
3030AN40 101 mm [4.0 in] 98 g [3.5 oz]
3030AN50 127 mm [5.0 in] 128 g [4.5 oz]
> 3080 Series Sub
Miniature VRS Sensor
> 3015HTB Series High
Temperature VRS
Sensors
> Download VRS
Calculator
Mates with 41010(VR) Connector or CA210 Cable Assembly.
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
Sensors with 5/8-18 UNF-2A Mounting Thread*, 24" (300 mm)
Leads
Dimensions
Part Number Thread Length Weight
3030S20 50 mm [2.0 in] 70 g [2.5 oz]
3030S30 76 mm [3.0 in] 84 g [3.0 oz]
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
Sensors with 5/8-18 UNF-2A Mounting Thread*, 1/2-14 NPT
Conduit Mount, 300 mm [24 in] Leads
Dimensions
Part Number Thread Length Weight
3030H20 50 mm [2.0 in] 140 g [5.0 oz]
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
Sensors with 5/8-18 UNF-2A Mounting Thread*, MS3106
Connector, 7,9 mm [0.312 in] Thread Relief
Dimensions
Part Number Thread Length Weight
3030A 1.4" (35 mm) 2.5 oz. (70 gr.)
3030A25 2.5" (63 mm) 3.0 oz. (84 gr.)
Mates with 41010(VR) Connector or CA210 Cable Assembly.
* For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of
the model number.
