CCF chip fuse EU features * Surface mount fuse suitable for primary and secondary circuits * Ceramic case provides excellent mechanical strength * Suitable for flow and reflow soldering * Marking: White body color with black marking * Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Dimensions inches (mm) W t W L t Type L CCF .236.008 (6.00.2) .098.008 (2.50.2) d .098.008 (2.50.2) .055.008 (1.40.2) d d Ceramic Fuse Case Element circuit protection End Cap ordering information New Part # CCF 1 N Type Style Characteristic N: Normal blow 1 T Rated Current Reference rating chart Termination Material T: Sn TE Packaging TE: 4mm pitch embossed plastic (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/23/10 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 241 CCF chip fuse applications and ratings Part Designation Current Rating CCF1N0.4 CCF1N0.5 CCF1N0.63 CCF1N0.8 CCF1N1 CCF1N1.25 CCF1N1.6 CCF1N2 CCF1N2.5 CCF1N3.15 CCF1N4 CCF1N5 CCF1N6.3 Voltage Rating 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A CCF1N7 7A CCF1N8 CCF1N10 CCF1N12 8A 10A 12A CCF1N15 15A Operating Temperature Range Interrupting Capacity Fusing Characteristics UL (c-UL) AC 125V 50A DC 60V 50A (DC 160V) UL (c-UL) 100% 200% 4 hour min. 1 second max. PSE AC 100V PSE AC 100V 100A PSE 130% 160% 200% 4 hour min. 1 hour max. 1 second max. UL (c-UL) AC 125V 50A DC 60V 50A UL (c-UL) 100% 200% 4 hour min. 1 second max. -55C to +125C Normal Melting l2t (A2, seconds) 650 510 390 250 90.4 75.9 59.3 42.9 36.6 26 20.1 15.3 11.4 0.024 0.030 0.052 0.125 0.156 0.220 0.513 0.814 1.31 2.37 3.85 6.5 10.6 10.5 12.8 9.5 7.5 4.5 17.0 27.7 73.5 3.5 125.5 Rated Current Fusing Time UL (c-UL) AC 125V DC 60V (DC 160V) UL (c-UL) AC 125V DC 60V Internal R. (m) Max. (DC 160V) (DC 160V) UL (c-UL) AC 65V DC 65V UL (c-UL) AC 65V 50A DC 65V 50A UL (c-UL) 100% 200% 4 hour min. 60 seconds max. environmental applications Fusing Characteristics 10 -35 -15 5 25 45 65 85 105 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -55 Fusing Time (Sec.) circuit protection Derating Coefficient Number Derating Curve 1 .1 .01 .001 0.1 125 1 Ambient Temperature (C) 10 100 Fusing Current (A) Performance Characteristics Parameter Fusing Characteristics Surface Temperature Rise Bending Test Requirement R% Limit Typical Within specified time. -- No restrike -- Max. Temp. Rise 140C Max. Temp. Rise 75C No mechanical damages -- -- Test Method Fusing time measured under rated current x 160% and 200% Surface temperature should be measured by rated current x 115% Surface temperature should be measured by rated current x 100% Distance between holding points 90mm, bending width 3mm, 1 time 10% 3% 260C 5C, 10 seconds 0.5 seconds 95% coverage min. 10% -- 5% 235C 5C, 3 seconds 0.5 seconds 70C 2C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle Load Life Moisture 10% 5% 40C 2C, 90 - 95% RH, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle Rapid Change of Temperature 10% 5% -55C (30 minutes), +125C (30 minutes), 100 cycles Resistance to Soldering Heat Solderability Load Life Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 242 1/01/11 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com