379
Surface Mount Fuses
www.littelfuse.com
10
SURFACE MOUNT
FUSES
For NANO2® Surface Mount Fuses
SMF OMNI-BLOK®Fuse Block Molded Base Type 154 Series
With Very Fast-Acting Fuse Installed
Catalog Ampere Fuse
Number Rating Furnished1
154.062 1/16 0451.062
154.125 1/8 0451.125
154.250 1/4 0453.250
154.375 3/8 0453.375
154.500 1/2 0453.500
154.750 3/4 0453.750
154 001 1 0453 001.
154 01.5 1.5 0453 01.5
154 002 2 0453 002.
154 02.5 2.5 0453 02.5
154 003 3 0453 003.
154 03.5 3.5 0453 03.5
154 004 4 0453 004.
154 005 5 0453 005.
154 007 7 0453 007.
154 008 8 0453 008.
154 010 10 0453 010.
With Slo-Blo®Fuse Installed
Catalog Ampere Fuse
Number Rating Furnished2
154.375T 3/8 0454.375
154.500T 1/2 0454.500
154.750T 3/4 0454.750
154 001T 1 0454 001.
154 01.5T 11/20454 01.5
154 002T 2 0454 002.
154 02.5T 21/20454 02.5
154 003T 3 0454 003.
154 03.5T 31/20454 03.5
154 004T 4 0454 004.
154 005T 5 0454 005.
1453 Series Fuse has silver plated end caps, installed to accommodate solder reflow process.
Use either 451 or 453 Series for replacement purposes, page 371.
2454 Series Fuse has silver plated end caps, installed to accommodate solder reflow process.
Use either 452 or 454 Series for replacement purposes, page 372.
The RoHS Compliant SMF Omni-Blok®Fuseholder permits quick and
easy replacement of Nano2® SMF surface mount fuses. The fuse block
and pre-installed fuse combination can be placed on the PC board in
one efficient manufactur ing operation. Fuse replacement is accomplished
without exposing the PC board to the detr imental effects of solder heat.
Refer to notes 1 and 2, below, for fuse/fuseholder combinations
available.
AGENCY APPROVALS: Recognized under the Components Program
of Underwriters Laboratories and Certified by CSA.
SPECIFICATIONS:
Electrical: 8 Amperes, 125 Volts.
Molded Parts: Thermoplastic (94V0).
Terminals: Tin Plated Copper.
Ambient T emperature: –55°C to +125°C.
Shock: MIL-STD-202, Method 213, Test Condition I
(100 G’s peak for 6 milliseconds).
Vibration: MIL-STD-202, Method 201 (10 –55 Hz).
Thermal Shock: MIL-STD-202, Method 107, Condition A
(200 cycles: 30 minutes at –55°C, 30 minutes at 125°C).
Soldering Parameters (Fuse Installed):
Reflow — 154 000: 446°F (230°C), 30 sec.
154 000T: 446°F (230°C), 30 sec.
Solderability: MIL-STD-202, Method 208.
Packaging: 16mm Tape and Reel for use with automatic pick and
place equipment per EIA Standard 481; 1,500 per reel, add suffix DR.
PATENTEDORDERING INFORMATION:
L
F
7 A
L
F
3.81
(.150")
2.13
(.084")
REF.
10.62
(.418")
4.24
(.167")
9.73
(.383") REF.
3.81
(.150")
5.03
(.198")
1
5
5
FUSE
Recommended Pad Layout
®®
RoHS