SBE / SBF LIGHTED PUSHBUTTON SWITCHES - SEALED (IP65)
Phone 707-778-6311 ¥ Fax 707-778-6401 ¥ E-mail info@schurterinc.com ¥ Website http://www.schurterinc.com 59
Models Dimensions Part Number
SBE 0041.3012
Can be combined with all contact
blocks.
With colored, transparent or
covered lenses as well as with
legend plate inserts and indicator
for key position.
SBE Lighted pushbutton switch
18 x 24mm
SBE 0041.3014
Can be combined with all contact
blocks.
With colored, transparent or
covered lenses as well as with
legend plate inserts and indicator
for key position.
SBE 0041.3016
Can be combined with all contact
blocks.
With colored, transparent or
covered lenses as well as with
legend plate inserts and indicator
for key position.
SBE Lighted pushbutton switch
¯ 18mm
8 N
6 mm
AC (category 11) DC (category 11)
Ui250 V Ui300 V
Ue250 V Ue220 V, 110 V, 60 V, 24 V
Ie5 A SEV/CSA Ie0.2 A, 0.4 A, 1 A, 2 A
6.3 (3) A VDE/UL/SEMKO 1-pole
4 (3) A SEMKO 2-pole
IP 65 according to IEC 529 (front side)
qualified for equipment of protection class II/IEC 536
Actuating force
Operating travel
Rated insulation voltage
Rated voltage
Rated current
Mech. lifetime
Breaking capacity
106105
10¥Ie1.1¥Ie
Protection class
Degree of protection (see pg. 93 for key to IP codes)
General Description
SBE and SBF actuators permit optimum use of the avialable area with minimum space requirement and are the mechanically robust
version of the EMF series actuators (see pg. 56 ). The SBE is built according to SEV 1005, VDE 0630, SEMKO 124, CSA C22.2/14,
UL 508, CEE 24. Both the SBE and SBF have international approvals from UL, CSA, VDE, SEMKO, SEV.
Illumination:
The actuators can be used with incandescent lamps, neon lamps and LEDÕs with sockets and resistors. The actuator sockets accept
mini lamps T5, 5K-22 max. length.
SBE Lighted pushbutton switch
18 x 18mm
SBF 0041.3009
Can be combined with contact
block 0041.3101/3102
Red mushroom switch, latching in
depressed position, twist to reset.
With center of pressure for
inadvertant operation.
0886.0008 (required accessory)
Yellow, panel nameplate, PVC
foil, self adhesive, 16mm cutout
SBF emergency STOP switch
¯ 32mm
Technical data
SEK CONTACT BLOCKS - SEALED (IP 65)
Models Dimensions Part Number
Contact block with hard silver contacts
The series SEK contact blocks can be connected to built-in units as described on page 59. The 2.8 x 0.8 mm quick connect
terminals can also be used as solder terminals. The contact blocks have a quick-release fastener for connecting to the
actuators. The contact blocks each have one N.C. and one N.O. contact (change-over). The contacts are self cleaning by the
slight relative motion of the connection link. Contact break is duplicated and under contraint for the N.C. contact. Other contact
configurations available on request.
Terminal markings
The terminals are deignated in accordance with European standard EN 50013 with 21 and 22 (31 and 32) for N.C. contacts
and 13 and 14 (43 and 44) for N.O. contacts. The lamp terminals are marked ÒX1Ó and ÒX2Ó.
Illumination
The actuators can be used with incandescent lamps, neon lamps and LEDÕs with sockets and resistors. The actuator sockets accept
mini lamps T5, 5K-22 max. length.
Approvals
UL Recognition (File #E73407) VDE Approval SEV Approval
CSA Certification (File #LR14568) SEMKO Approval
60 Phone 707-778-6311 ¥ Fax 707-778-6401 ¥ E-mail info@schurterinc.com ¥ Website http://www.schurterinc.com
SEK 0041.3105
¥ 2 N.O. + 2 N.C. contacts
¥ T5.5K lamp sockets
¥ lamps ordered separately; see
page 64)
SEK 0041.3109
¥ 2 N.O. + 2 N.C. contacts
¥ T5.5K lamp sockets
¥ lamps ordered separately; see
page 64)
Momentary action, lighted
Latching action, lighted
Momentary action, unlighted SEK 0041.3101
¥ 1 N.O. + 1 N.C. contact