BC182LB BC182LB NPN General Purpose Amplifier * This device is designed for general purpose amplifier application at collector currents to 100mA. * Sourced from process 10. TO-92 1 1. Emitter 2. Collector 3. Base Absolute Maximum Ratings TC=25C unless otherwise noted Symbol VCEO Collector-Emitter Voltage Parameter Value 50 VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 6 V IC Collector Current 100 mA TJ, TSTG Storage Junction Temperature Range - 55 ~ 150 C - Continuous Units V Electrical Characteristics TC=25C unless otherwise noted Symbol Parameter Off Characteristics V(BR)CEO Collector-Emitter Breakdown Voltage Test Condition Min. Typ. Max. Units IC = 2mA, IB = 0 50 V V(BR)CBO Collector-Base Breakdown Voltage IC = 10A, IE = 0 60 V 6 V(BR)EBO Emitter-Base Breakdown Voltage IE = 100A, IC = 0 ICBO Collector Cut-off Current VCB = 50V, VBE = 0 15 nA IEBO Emitter-Base Leakage Current VEB = 4V, IE = 0 15 nA 0.25 0.6 V On Characteristics hFE DC Current Gain VCE(sat) VCE = 5V, IC = 10A VCE = 5V, IC = 100mA 40 80 Collector-Emitter Saturation Voltage IC = 10mA, IB = 0.5mA IC = 100mA, IB = 5mA VBE(sat) Base-Emitter Saturation Voltage IC = 100mA, IB = 5mA VBE(on) Base-Emitter On Voltage VCE = 5V, IC = 2mA 0.55 VCE = 5V, IC = 10mA, f = 100MHz 150 Dynamic Characteristics fT Current Gain Bandwidth Product Cob Output Capacitance VCE = 10V, IC = 0, f = 1MHz hfe Small Signal Current Gain VCE = 5V, IC = 2mA, f = 1KHz NF Noise Figure VCE = 5V, IC = 0.2mA RS = 2K, f = 1KHz, BW = 200Hz (c)2002 Fairchild Semiconductor Corporation V 1.2 V 0.7 V MHz 5 240 pF 500 10 dB Rev. A1, August 2002 Symbol PD Parameter Total Device Dissipation @TA=25C Derate above 25C Max. 350 2.8 Units mW mW/C RJA Thermal Resistance, Junction to Ambient 357 mW/C RJC Thermal Resistance, Junction to Case 125 C/W (c)2002 Fairchild Semiconductor Corporation Rev. A1, August 2002 BC182LB Thermal Characteristics TA=25C unless otherwise noted BC182LB Package Dimensions TO-92 +0.25 4.58 0.20 4.58 -0.15 0.10 14.47 0.40 0.46 1.27TYP [1.27 0.20] 1.27TYP [1.27 0.20] 0.20 (0.25) +0.10 0.38 -0.05 1.02 0.10 3.86MAX 3.60 +0.10 0.38 -0.05 (R2.29) Dimensions in Millimeters (c)2002 Fairchild Semiconductor Corporation Rev. A1, August 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FACTTM ActiveArrayTM FACT Quiet seriesTM BottomlessTM FAST(R) FASTrTM CoolFETTM CROSSVOLTTM FRFETTM GlobalOptoisolatorTM DOMETM EcoSPARKTM GTOTM E2CMOSTM HiSeCTM EnSignaTM I2CTM Across the board. Around the world.TM The Power FranchiseTM Programmable Active DroopTM ImpliedDisconnectTM ISOPLANARTM LittleFETTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench(R) QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM TruTranslationTM UHCTM UltraFET(R) VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. (c)2002 Fairchild Semiconductor Corporation Rev. I1