CUSTOMER DRAWING Product Revision Product Name B-020-42-05 Product Dimensions oB oC L min min max oA min B 6.30 [.248] 4.60 [.181] 2.80 [.110] 31.00 [1.220] K min 180.00 [7.087] oD oE 2.20 [.087] to 5.70 [.224] 2.10 [.083] to 4.50 [.177] Cable Dimensions oF G0.5 min (G0.02) M0.5 (M0.02) 6.0 [.236] 17.0 [.669] 0.30 [.012] MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORMS WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. 4. CONDUCTOR LEAD: Raychem 55A0111-22 in accordance with MIL-W-22759/32 AWG22 stranded tin plated copper. Color: white. 5. GROUND LEAD: Raychem 55A0111-22 in accordance with MIL-W-22759/32 AWG22 stranded tin plated copper. Color: black. APPLICATION 1. This controlled soldering device is designed for termination of coaxial cables to connectors and printed circuit boards. They will terminate the tin or silver plated center conductor and the single or double tin or silver plated copper braid of a coaxial cable having an insulation rated for at least 125C. 2. Temperature range: -55C to +150C. 3. Install using Raychem-approved convection or infrared hating tools in accordance with Raychem Installation Procedure RPIP-500-03. NOTE: For best results, prepare the cable as illustrated above. TITLE : Raychem Devices UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN [.xxx] BRACKETS. Raychem reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should 0.00 N/A evaluate the suitability of the product ROUGHNESS IN 0.0 N/A for their application. MICRON 0 N/A DRAWN BY: M. FORONDA CAGE CODE: 06090 CAD NAME: B-020-42-05.doc (c)2015 TE CONNECTIVITY LTD. FAMILY OF COMPANIES. ALL RIGHT RESERVED. COAXIAL SOLDERSLEEVE DEVICE WITH PRE-INSTALLED STRANDED WIRES DOCUMENT NO.: B-020-42-05 DATE: REVISED PER: 12-Jun-15 PROD. REV. SEE TABLE ECO-15-008855 REVISION: A1 SIZE: A If this document is printed it becomes uncontrolled. Check for the latest revision. SHEET: 1 of 1