General Purpose, Pulse and DC Transient Suppression PHE448 Series Polypropylene Film/Foil, Radial Overview Applications The PHE448 Series is a capacitor with polypropylene film dielectric and metal foil electrodes, encapsulated in selfextinguishing resin in a box of material meeting the requirements of UL 94 V-0. Typical applications include high frequency and high voltage applications requiring capacitors with extremely high current handling capability, i.e., high dV/dt values. Benefits * * * * * * * * * Rated voltage: 1,600 - 2,000 VDC Rated voltage: 650 - 700 VAC Capacitance range: 0.0001 - 0.022 F Lead spacing: 15 mm Capacitance tolerance: 5%, other tolerances on request Climatic category: 55/105/56, IEC 60068-1 Tape and reel packaging in accordance with IEC 60286-2 RoHS Compliant and lead-free terminations Category temperature range of -55C to +105C Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Legacy Part Number System PHE448 R B 4150 Series Rated Voltage (VDC) Lead Spacing (mm) Capacitance Code (pF) B = 15.0 The last three digits represent significant figures. The first digit specifies the total number of digits. Polypropylene Film/Foil R = 1,600 S = 2,000 J R06 Capacitance Tolerance J = 5% Other tolerances on request Packaging See Ordering Options Table New KEMET Part Number System F 448 B D Capacitor Class Series Lead Spacing (mm) Size Code F = Film Polypropylene Film/Foil B = 15.0 See Dimension Table 152 J Capacitance Code Capacitance (pF) Tolerance First two digits J = 5%, represent Other tolerances significant on request figures. Third digit specifies number of zeros. 1K6 Rated Voltage (VDC) 1K6 = 1,600 2K0 = 2,000 C Packaging See Ordering Options Table One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 1 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) KEMET Legacy Lead and Lead and Packaging Packaging Code Code Standard Lead and Packaging Options Bulk (Bag) - Short Leads Bulk (Bag) - Long Leads 15 6 +0/-1 17 +0/-1 C A R06 R17 Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) Tape & Reel (Large Reel) 30 +5/-0 H0= 18.5 +/-0.5 H0= 18.5 +/-0.5 ALW0L L P R30 R17T0 R17T1 Ammo Pack H0= 16.5 +/-0.5 XLAF1 R25XA Tape & Reel (Standard Reel) H0= 16.5 +/-0.5 XLTF1 R25X2 Other Lead and Packaging Options Native 15 formed to 7.5 Dimensions - Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p p B H L d KEMET Size Code Legacy Size Code Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance BD BL BJ BQ BV BY B04 B06 B10 B11 B14 B16 15 15 15 15 15 15 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 5.5 7.5 6.5 8.5 9.5 11 Maximum Maximum Maximum Maximum Maximum Maximum 10.5 14.5 12.5 16 17.5 19 Maximum Maximum Maximum Maximum Maximum Maximum 18 18 18 18 18 18 Maximum Maximum Maximum Maximum Maximum Maximum 0.8 0.8 0.8 0.8 0.8 0.8 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 2 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Performance Characteristics Voltage Range (VDC) 1,600 2,000 Voltage Range (VAC) 650 700 0.0015 - 0.022 0.0001 - 0.0033 Capacitance Range (F) Capacitance Values Capacitance Tolerance Category Temperature Range Rated Temperature Voltage Derating Climatic Category In accordance with IEC E12 series 5%, other tolerances on request -55C to +105C +85C The rated voltage is decreased with 1.3%/C between +85C and +105C IEC 60068-1, 55/105/56 Maximum Values at +23C Dissipation Factor tan 1 kHz 0.0003 10 kHz 0.0005 100 kHz 0.001 Measured at +23C, 100 VDC 60 seconds for VR < 500 VDC and at 500 VDC for VR 500 VDC Minimum Values Between Terminals Insulation Resistance 100,000 M Minimum Values Between Terminals and Case 100,000 M Derating of Vrms vs. Frequency, +85C Ambient Temperature and 10C Internal Heating, Typical Values (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 3 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Environmental Test Data Test Voltage Proof IEC Publication 60384-1 Clause 4.6 Clause 4.6 2.3 Vibration 60068-2-6 Test Fc Bump 60068-2-29 Test Eb Resistance to Soldering Heat 60068-2-20 Method 1A Climatic Sequence 60384-1 Paragraph 4:21 Damp Heat Steady State 60068-2-3 Test Ca Endurance, AC Charge and Discharge 60384-17 Paragraph 4.13 Procedure 1.6 x VR after 60 seconds 2 x VR (minimum 400 VDC to case) after 60 seconds 6 hours with 10 - 500 Hz and 0.75 mm amplitude or 98 m/s2 depending on frequency 4,000 bumps with 390 m/s2 mounted on PCB Solder bath at + 260C 5C with screening 60068-2.2 dry heat 16 hours 60068-2-34 damp heat, one cycle 60068-2-1 Test Aa 2 hours +40C and 90 - 95% RH Requirements The capacitors must withstand the voltage without breakdowns or flashovers and without decreased insulation resistance below the value in each detail specification. No visible damage As above No visible damage tan 1.2 x stated value at 100 kHz C/C 0.5 % C/C 0.5% tan 1.2 x stated value at 100 kHz Insulation resistance: 100,000 M for CR 0.33 F 30,000 M * F for CR > 0.33 F Immersion of the terminations into the solder bath shall be completed in a time not exceeding 1 second and the terminations shall remain immersed to the specified depth for 10 + 1 second and then be withdrawn. C/C 1.0% tan increase < 0.001 No visible damage Insulation resistance: 100,000 M for CR 0.33 F 30,000 M * F for CR > 0.33 F C/C 0.5% tan 1.2 x stated value at 100 kHz 56 days no visible damage Insulation resistance: 50,000 M for CR 0.33 F 15,000 M * F for CR > 0.33 F C/C 1% tan 1.2 x stated value at 100 kHz 1,000 hours at +85C and 1.25 x VR AC No visible damage C/C 3% tan 1.5 x stated value at 100 kHz Insulation resistance: 100,000 M for CR 0.33 F 30,000 M * F for CR > 0.33 F 10,000 pulses and with (2 x) dV/dt according to detail specification tan (100 kHz) 2 x stated value (100 kHz) C/C 0.5% Insulation resistance: 50,000 M for CR 0.33 F 15,000 M * F for CR > 0.33 F Environmental Compliance All KEMET pulse capacitors are RoHS Compliant. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 4 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Table 1 - Ratings & Part Number Reference VDC VAC Cap Value (F) B H L 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.0001 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 5.5 5.5 5.5 6.5 6.5 6.5 6.5 7.5 7.5 8.5 8.5 9.5 9.5 11.0 11.0 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 6.5 6.5 7.5 8.5 8.5 9.5 10.5 10.5 10.5 12.5 12.5 12.5 12.5 14.5 14.5 16.0 16.0 17.5 17.5 19.0 19.0 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 12.5 12.5 14.5 16.0 16.0 17.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 15000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 25000 VDC VAC Cap Value (F) B (mm) H (mm) L (mm) Lead Spacing (p) dV/dt (V/ s) Dimensions in mm Lead Spacing (p) Rthha C/W 85C 0.2m/s New KEMET Part Number Legacy Part Number BD/B04 BD/B04 BD/B04 BJ/B10 BJ/B10 BJ/B10 BJ/B10 BL/B06 BL/B06 BQ/B11 BQ/B11 BV/B14 BV/B14 BY/B16 BY/B16 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BD/B04 BJ/B10 BJ/B10 BL/B06 BQ/B11 BQ/B11 BV/B14 87 86 84 82 82 82 82 78 78 70 70 60 60 55 55 87 87 87 87 87 87 86 86 86 85 85 85 84 82 82 78 70 70 60 F448BD152J1K6(1) F448BD182J1K6(1) F448BD222J1K6(1) F448BJ272J1K6(1) F448BJ332J1K6(1) F448BJ392J1K6(1) F448BJ472J1K6(1) F448BL562J1K6(1) F448BL682J1K6(1) F448BQ822J1K6(1) F448BQ103J1K6(1) F448BV123J1K6(1) F448BV153J1K6(1) F448BY183J1K6(1) F448BY223K1K6(2) F448BD101J2K0(1) F448BD121J2K0(1) F448BD151J2K0(1) F448BD181J2K0(1) F448BD221J2K0(1) F448BD271J2K0(1) F448BD331J2K0(1) F448BD391J2K0(1) F448BD471J2K0(1) F448BD561J2K0(1) F448BD681J2K0(1) F448BD821J2K0(1) F448BD102J2K0(1) F448BJ122J2K0(1) F448BJ152J2K0(1) F448BL182J2K0(1) F448BQ222J2K0(1) F448BQ272J2K0(1) F448BV332J2K0(1) PHE448RB4150J(1) PHE448RB4180J(1) PHE448RB4220J(1) PHE448RB4270J(1) PHE448RB4330J(1) PHE448RB4390J(1) PHE448RB4470J(1) PHE448RB4560J(1) PHE448RB4680J(1) PHE448RB4820J(1) PHE448RB5100J(1) PHE448RB5120J(1) PHE448RB5150J(1) PHE448RB5180J(1) PHE448RB5220K(2) PHE448SB3100J(1) PHE448SB3120J(1) PHE448SB3150J(1) PHE448SB3180J(1) PHE448SB3220J(1) PHE448SB3270J(1) PHE448SB3330J(1) PHE448SB3390J(1) PHE448SB3470J(1) PHE448SB3560J(1) PHE448SB3680J(1) PHE448SB3820J(1) PHE448SB4100J(1) PHE448SB4120J(1) PHE448SB4150J(1) PHE448SB4180J(1) PHE448SB4220J(1) PHE448SB4270J(1) PHE448SB4330J(1) Size Code (New/Legacy) Rthha C/W 85C 0.2m/s New KEMET Part Number Legacy Part Number dV/dt Size Code (V/s) (New/Legacy) (1) Insert lead and packaging code. See Order Options Table for available options. (2) K = 10% (only available tolerance). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 5 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183C for SnPb eutectic alloy to 217 - 221C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 - 170C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3s max 260C 250 First wave Temperature (C) Recommended Soldering Temperature Soldering iron bit temperature (deg C) 400 350 300 250 Second wave 200 Cooling T <150C Preheating 150 ca 2C/s ca 3.5C/s typical Tpreheat 100 ca 5C/s 115C max 100C Typical 200 50 150 100 0 0 50 40 80 120 160 200 240 Time (s) 0 0 1 2 3 4 5 6 7 8 Soldering time (sec) The soldering iron tip temperature should be set at 350C (+10C maximum) with the soldering duration not to exceed more than 3 seconds. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 6 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch 10 mm = 15 mm > 15 mm 15 mm > 15 mm Polyester 130C 130C 130C 270C 270C Polypropylene 100C 110C 130C 260C 270C Paper 130C 130C 140C 270C 270C Polyphenylene Sulphide 150C 150C 160C 270C 270C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160C Polypropylene 110C Paper 160C Polyphenylene sulphide 160C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 7 Metallized Polyester Film lene ctric Film Capacitors Polypropylene Double-sided Film Dielectric General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Metallized Polyester Carrier Film Single-sided Metallized Polypropylene Film Construction Polypropylene Film (First Layer) Molded Plastic Case 2 Sections Metal Foil (Second Layer) Margin lene ctric Molded Plastic Case Self-Extinguishing Resin Polypropylene Film (Third Layer) Polypropylene Film Dielectric Double-sided Metallized Polyester Carrier Film Detailed Cross Section Metal Foil (Fourth Layer) Single-sided Metallized Polypropylene Film 4 Sections Metal Contact Layer Metal Contact Layer Margin Margin Leads ropylene Film/Foil Winding Scheme opylene Dielectric Single-sided Metallized Polypropylene Film Metal Foil Polypropylene Film Dielectric 2 Sections ylene Film/Foil Single-sided Metallized Polypropylene Film Polypropylene Film Dielectric Metal Foil ble-sided tallized 2 Sections AXIAL - Double-sided Metallized Polyester Film (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Polypropylene Film Dielectric F3038_PHE448 * 5/19/2015 8 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Marking FRONT TOP Series Rated Voltage Capacitance Tolerance Capacitance Manufacturing Date Code Packaging Quantities KEMET Legacy Lead Thickness Height Length Size Size Spacing (mm) (mm) (mm) Code Code BD BE BL BJ BQ BM BV BG BY BU B04 B05 B06 B10 B11 B12 B14 B15 B16 B17 15 Bulk Bulk Short Long Leads Leads Standard Standard Large Reel Ammo Reel Reel o 500 mm Formed o 360 mm Formed 5.5 5.5 7.5 6.5 8.5 8 9.5 6 10.5 12.5 14.5 12.5 16 15 17.5 12 18 18 18 18 18 18 18 18 1000 1000 800 1000 600 600 500 1000 800 800 400 600 400 400 300 800 600 600 400 500 400 400 350 500 1200 1200 800 1000 800 800 700 1000 550 550 350 450 350 350 250 450 570 570 378 480 324 351 297 520 11 13 19 12.5 18 18 450 400 250 300 300 250 600 500 250 200 252 216 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 9 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Lead Taping & Packaging (IEC 60286-2) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 22.5 - 27.5 mm Lead Spacing 10 - 15mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Standard IEC 60286-2 Dimensions in mm Lead spacing +6/-0.1 F 5 7.5 Formed 7.5 10 15 22.5 27.5 F Carrier tape width +/-0.5 W 18 18 18 18 18 18 18 18+1/-0.5 Hold-down tape width +/-0.3 W0 9 9 9 12 12 12 12 Position of sprocket hole +/-0.5 W1 9 9 9 9 9 9 9 9+0.75/-0.5 Distance between tapes Maximum W2 3 3 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 4 4 Feed hole lead spacing +/-0.3 P0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 Distance lead - feed hole +/-0.7 P1 3.85 3.75 3.75 7.7 5.2 5.3 5.3 P1 Deviation tape - plane Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 Lateral deviation Maximum h 2 2 2 2 2 2 2 2 Total thickness +/-0.2 t 0.7 0.7 0.7 0.7 0.7 0.9 0.9 Sprocket hole/cap body Nominal H0(2) Sprocket hole/top of cap body Maximum H1(3) (1) (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. 18.5+/-0.5 18.5+/-0.5 32 31 (4) 18.5+/-0.5 43 MAX MAX 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 43 43 58 58 0.9MAX 18+2/-0 58MAX (3) Depending on case size. (4) 15 mm available on request. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 10 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR H W T 360 340 59 330 330 50 H T W Reel Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D H W Manufacturing Date Code (IEC-60062) Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 11 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 12 Film Capacitors General Purpose, Pulse and DC Transient Suppression - PHE448 Series Polypropylene Film/Foil, Radial Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3038_PHE448 * 5/19/2015 13