MMSZ4678T1 Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features * Pb-Free Packages are Available * * * * * For Additional Pb-Free Options, Please Consult Factory 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 1.8 V to 43 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (>16 kV) per Human Body Model 1 Cathode 2 Anode SOD-123 CASE 425 STYLE 1 2 1 Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: MARKING DIAGRAM AA AA AA 260C for 10 Seconds xx M POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 xxx = Specific Device Code M = Date Code MAXIMUM RATINGS Rating Total Power Dissipation on FR-5 Board, (Note 1) @ TL = 75C Derated above 75C Symbol Max Unit 500 6.7 mW mW/C PD ORDERING INFORMATION Device** Package Shipping MMSZ4xxxT1 SOD-123 3000/Tape & Reel 3000/Tape & Reel Thermal Resistance, (Note 2) Junction-to-Ambient RJA 340 C/W MMSZ4xxxT1G SOD-123 (Pb-Free) Thermal Resistance, (Note 2) Junction-to-Lead RJL 150 C/W MMSZ4xxxT3 SOD-123 10,000/Tape & Reel TJ, Tstg -55 to +150 C MMSZ4xxxT3G SOD-123 10,000/Tape & Reel (Pb-Free) Junction and Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. FR-5 = 3.5 X 1.5 inches, using the minimum recommended footprint. 2. Thermal Resistance measurement obtained via infrared Scan Method. *MMSZ4703 and MMSZ4711 Not Available in 10,000/Tape & Reel **The "T1" suffix refers to an 8 mm, 7 inch reel. The "T3" suffix refers to an 8 mm, 13 inch reel. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2005 February, 2005 - Rev. 6 1 Publication Order Number: MMSZ4678T1/D MMSZ4678T1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless I otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR IR VF IZT Zener Voltage Regulator http://onsemi.com 2 V MMSZ4678T1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Note 3) VZ (Volts) Leakage Current @ IZT IR @ VR Device Marking Min Nom Max A A Volts MMSZ4678T1, G CC 1.71 1.8 1.89 50 7.5 1 MMSZ4679T1, G CD 1.90 2.0 2.10 50 5 1 MMSZ4680T1, G CE 2.09 2.2 2.31 50 4 1 Device MMSZ4681T1, G CF 2.28 2.4 2.52 50 2 1 MMSZ4682T1, G CH 2.565 2.7 2.835 50 1 1 MMSZ4683T1 CJ 2.85 3.0 3.15 50 0.8 1 MMSZ4684T1, G CK 3.13 3.3 3.47 50 7.5 1.5 MMSZ4685T1, G CM 3.42 3.6 3.78 50 7.5 2 MMSZ4686T1 CN 3.70 3.9 4.10 50 5 2 MMSZ4687T1, G CP 4.09 4.3 4.52 50 4 2 MMSZ4688T1 CT 4.47 4.7 4.94 50 10 3 MMSZ4689T1, G CU 4.85 5.1 5.36 50 10 3 MMSZ4690T1, G CV 5.32 5.6 5.88 50 10 4 MMSZ4691T1 CA 5.89 6.2 6.51 50 10 5 MMSZ4692T1, G CX 6.46 6.8 7.14 50 10 5.1 MMSZ4693T1 CY 7.13 7.5 7.88 50 10 5.7 MMSZ4694T1 CZ 7.79 8.2 8.61 50 1 6.2 MMSZ4695T1, G DC 8.27 8.7 9.14 50 1 6.6 MMSZ4696T1, G DD 8.65 9.1 9.56 50 1 6.9 MMSZ4697T1, G DE 9.50 10 10.50 50 1 7.6 MMSZ4698T1 DF 10.45 11 11.55 50 0.05 8.4 MMSZ4699T1, G DH 11.40 12 12.60 50 0.05 9.1 MMSZ4700T1 DJ 12.35 13 13.65 50 0.05 9.8 MMSZ4701T1 DK 13.30 14 14.70 50 0.05 10.6 MMSZ4702T1, G DM 14.25 15 15.75 50 0.05 11.4 MMSZ4703T1, G* DN 15.20 16 16.80 50 0.05 12.1 MMSZ4704T1 DP 16.15 17 17.85 50 0.05 12.9 MMSZ4705T1 DT 17.10 18 18.90 50 0.05 13.6 MMSZ4706T1 DU 18.05 19 19.95 50 0.05 14.4 MMSZ4707T1 DV 19.00 20 21.00 50 0.01 15.2 MMSZ4708T1 DA 20.90 22 23.10 50 0.01 16.7 MMSZ4709T1, G DX 22.80 24 25.20 50 0.01 18.2 MMSZ4710T1, G DY 23.75 25 26.25 50 0.01 19.0 MMSZ4711T1* EA 25.65 27 28.35 50 0.01 20.4 MMSZ4712T1 EC 26.60 28 29.40 50 0.01 21.2 MMSZ4713T1, G ED 28.50 30 31.50 50 0.01 22.8 MMSZ4714T1 EE 31.35 33 34.65 50 0.01 25.0 MMSZ4715T1 EF 34.20 36 37.80 50 0.01 27.3 MMSZ4716T1 EH 37.05 39 40.95 50 0.01 29.6 MMSZ4717T1, G EJ 40.85 43 45.15 50 0.01 32.6 3. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C. *Not Available in the 10,000/Tape & Reel. **The "G" suffix indicates Pb-Free package available. http://onsemi.com 3 MMSZ4678T1 Series 8 VZ, TEMPERATURE COEFFICIENT (mV/C) VZ, TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS 7 6 TYPICAL TC VALUES 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 VZ, NOMINAL ZENER VOLTAGE (V) 11 100 TYPICAL TC VALUES VZ @ IZT 10 1 12 10 100 VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1000 Ppk , PEAK SURGE POWER (WATTS) PD, POWER DISSIPATION (WATTS) 1.2 1.0 PD versus TL 0.8 0.6 PD versus TA 0.4 0.2 0 0 25 50 75 100 T, TEMPERATURE (5C) 125 RECTANGULAR WAVEFORM, TA = 25C 100 10 1 0.1 150 Figure 3. Steady State Power Derating 10 PW, PULSE WIDTH (ms) 100 1000 Figure 4. Maximum Nonrepetitive Surge Power 1000 1000 IZ = 1 mA TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) Z ZT, DYNAMIC IMPEDANCE ( ) 1 100 5 mA 20 mA 10 75 V (MMSZ5267BT1) 91 V (MMSZ5270BT1) 100 10 150C 1 1 10 VZ, NOMINAL ZENER VOLTAGE 100 1 0.4 Figure 5. Effect of Zener Voltage on Zener Impedance 0.5 75C 25C 0.6 0C 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) Figure 6. Typical Forward Voltage http://onsemi.com 4 1.1 1.2 MMSZ4678T1 Series TYPICAL CHARACTERISTICS 1000 1000 C, CAPACITANCE (pF) 0 V BIAS 1 V BIAS I R , LEAKAGE CURRENT ( A) TA = 25C 100 BIAS AT 50% OF VZ NOM 10 1 1 10 VZ, NOMINAL ZENER VOLTAGE (V) 100 100 10 1 +150C 0.1 0.01 0.001 +25 C 0.0001 -55 C 0.00001 0 10 Figure 7. Typical Capacitance 100 TA = 25C 10 1 0.1 0.01 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) 80 Figure 8. Typical Leakage Current I Z , ZENER CURRENT (mA) I Z , ZENER CURRENT (mA) 100 20 10 10 1 0.1 0.01 12 TA = 25C 10 30 50 70 VZ, ZENER VOLTAGE (V) 90 Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) http://onsemi.com 5 90 MMSZ4678T1 Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE C A AAA AAA C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. H 1 K DIM A B C D E H J K B E 2 MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --- 0.00 0.10 --- 0.15 3.55 3.85 STYLE 1: PIN 1. CATHODE 2. ANODE J D INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.01 --- 0.000 0.004 --- 0.006 0.140 0.152 SOLDERING FOOTPRINT* EEE EEE EEE EEE 0.91 0.036 2.36 0.093 4.19 0.165 EEE EEE EEE EEE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 6 For additional information, please contact your local Sales Representative. MMSZ4678T1/D