1.5SMC220 ... 1.5SMC550CA 1.5SMC220 ... 1.5SMC550CA Surface mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden fur die Oberflachenmontage Version 2012-04-04 2.20.2 2.10.1 7.90.2 1.2 0.15 Peak pulse power dissipation Impuls-Verlustleistung 1500 W Nominal breakdown voltage Nominale Abbruch-Spannung 220...550 V Type Typ 3 5.80.2 Plastic case Kunststoffgehause 0.5 7.2 Dimensions - Mae [mm] ~ SMC ~ DO-214AB Weight approx. - Gewicht ca. 0.21 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rollen For bidirectional types (add suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (erganze Suffix "C" oder "CA") gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 s) TA = 25C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TT = 75C PM(AV) Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle TA = 25C IFSM 100 A 2) Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung IF = 25 A VF < 3.0 V 2) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+150C -50...+150C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 33 K/W 3) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 10 K/W 1 2 3 1500 W 1) 5W Non-repetitive pulse see curve IPP = f (t) / PPP = f (t) Hochstzulassiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) Unidirectional diodes only - Nur fur unidirektionale Dioden Mounted on P.C. board with 50 mm2 copper pads at each terminal Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 1 1.5SMC220 ... 1.5SMC550CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s) VBR [V] VWM [V] ID [A] VC [V] IPPM [A] 1.5SMC220 220 10% 198...242 175 5 344 4.4 1.5SMC220A 220 5% 209...231 185 5 328 4.6 1.5SMC250 250 10% 225...275 202 5 360 4.2 1.5SMC250A 250 5% 237...263 214 5 344 4.4 1.5SMC300 300 10% 270...330 243 5 430 3.5 1.5SMC300A 300 5% 285...315 256 5 414 3.6 1.5SMC350 350 10% 315...385 284 5 504 3.0 1.5SMC350A 350 5% 332...368 300 5 482 3.1 1.5SMC400 400 10% 360...440 324 5 574 2.6 1.5SMC400A 400 5% 380...420 342 5 548 2.7 1.5SMC440 440 10% 396...484 356 5 631 2.4 1.5SMC440A 440 5% 418...462 376 5 602 2.5 1.5SMC480 480 10% 432...528 388 5 686 2.2 1.5SMC480A 480 5% 456...504 408 5 658 2.3 1.5SMC530 530 10% 477...583 429 5 764 2.0 1.5SMC530A 530 5% 503...556 477 5 729 2.1 1.5SMC550 550 10% 495...605 445 5 793 1.9 1.5SMC550A 550 5% 522...577 495 5 760 2.0 TVS diodes having stand-off voltage VWM = 5.0 ... 170 V: please refer to datasheet P6SMBJ65 TVS-Dioden mit Sperrspannung VWM = 5.0 ... 170 V: siehe Datenblatt P6SMBJ65 2 http://www.diotec.com/ (c) Diotec Semiconductor AG 1.5SMC220 ... 1.5SMC550CA 120 [%] tr = 10 s 100 100 [%] 1 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [C] IPPM/2 PPPM/2 tP 0 t 1 2 3 [ms] 4 10/1000s - pulse waveform 10/1000s - Impulsform 1 Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 2 10 [kW] 10 1 PPP 0.1 0.1s tP 1s 10s 100s 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) TVS diodes having stand-off voltage VWM = 5.0 ... 170 V: please refer to datasheet P6SMBJ65 TVS-Dioden mit Sperrspannung VWM = 5.0 ... 170 V: siehe Datenblatt P6SMBJ65 1 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 3