Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
6-1773444-7–2.5M–LUG–FP–10-07
AMP & ELCON Power
Connector Layout Forms
2
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Table of Contents
AMP & ELCON Power Connector Layout Forms
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
© Copyright 2007, 2006, and 2005
by Tyco Electronics Corporation.
All International Rights Reserved.
AMP, ELCON, FLATPAQ, MINIPAK,
MULTI-BEAM XL, TE LOGO and
TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted mate-
rials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents our
current actual knowledge based on the information provided by
our suppliers. This information is subject to change. For latest
compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24 hours
during a normal work week. The Support Center also provides:
■Cross-Reference from
Non-compliant to Compliant
Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions used above
■So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
MULTI-BEAM XL Custom Connector Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
MINIPAK Custom Connector Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FLATPAQ Connector Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mini Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mini Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Lower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Lower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
75A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
75A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . 11
125A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
125A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 13
200A Middle Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
200A Middle Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 15
Square Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Square Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Top Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Top Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Double Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Double Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DualPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DualPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . 23
QuadPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
QuadPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . 25
In-Line QuadPower Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . 26
In-Line QuadPower Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . 27
W5 Power Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
W5 Power Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
HV8P Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
HV8P Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
P10S0 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
P10S0 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
P10S22 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
P10S22 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
P12S12 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
P12S12 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
P0S30 Drawer Connector Pin Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
P0S30 Drawer Connector Socket Side Layout Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
MULTI-BEAM XL Custom Connector Worksheet
AMP & ELCON Power Connector Layout Forms
1. Application Board-to-Board Cable-to-Board
2. Gender Plug (Male) Receptacle (Female)
Blind Mate specify Floating or Slide-to-Lock receptacle Latching
Cable Only
(Cable Only)
3. Orientation
Right Angle Vertical
PCB Only
4. Termination
10 AWG
24 AWG
12 AWG
26 AWG
14 AWG
8 AWG
22 AWG
Power
Signal
5. Termination Style
Press-Fit .135″[3.43mm]
Press-Fit .165″[4.19mm]
Solder tail .165″[4.19mm]
Solder tail .135″[3.43mm] Press-Fit .120″[3.05mm]
Section A: (Power Contacts) ___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the position(s) to be loaded with Pre-mate contact (Receptacles only)
(Mate-First-Break-Last) ( i.e. #1,#3, etc.)
Contact Centerline Spacings: .200′′ [5.08mm] (HDP)
.250′′ [6.35mm] (P)
.300′′ [7.62mm](ACP)
Section B: (Signal Contacts) ___ Enter # of Signal Contacts (Multiples of 8 are standard, i.e. 16, 24, 32...)
___ Enter the Positions with Post-Mate Contacts (Mate-Last-Break-First, Plugs only)
Note: Row A is standard (i.e. A1, A3, etc.)
Section C: (Power Contacts) ___ Enter # of Power Contacts (Loaded with standard length Power Contacts)
___ Enter the positions to be loaded with Pre-Mate Contacts (Receptacles only)
(Mate-First-Break-Last, i.e. #1, #3, etc.)
Contact Centerline Spacings: .200′′ [5.08mm] (HDP)
.250′′ [6.35mm] (P)
.300′′ [7.62mm] (ACP)
6. Mounting to PCB
.122′′ [3.10mm] Mounting holes (Accepts #4 screws, right angle connectors only)
Hold Downs (one on either end)
.150′′ [3.81mm] Mounting holes (Accepts #6 screws, right angle connectors only)
8. Additional Requirements
9. Customer Information
Name: __________________________Company: ____________________Location: ________________________
Phone: __________________________Fax: __________________________________e-mail:_________________________
(Submit to your local Tyco Electronics Sales Engineer)
A
B
C
D
12N
A
1234N
5
B
1234N
C
Mounting
Hole
Hold
Down
Header/Plug (Right Angle Shown)
1
2N
A
B
C
D
3
C
3
4N 5
B
21 2
3N
A
1
Receptacle (Vertical Shown)
Electrically Hot
7. Select # of Contacts
(PCB Only)
To create a unique configuration for MULTI-BEAM XL Connectors simply complete this worksheet and forward it to your Tyco Electronics sales engineer.
PCB Mount Cable Mount
Slide-to-Lock
XYZ Floating
Plugs
Squeeze-to-
Release
XYZ Floating
AMP, ELCON, MULTI-BEAM XL, TE LOGO and TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
MINIPAK Connector
a. Enter your information in the table to the right.
b. Specify the design requirements for your MINIPAK Connector
configuration in steps 1 through 5 shown below.
c. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Tyco Electronics will recommend a MINIPAK Connector configuration
based on the specified requirements and issue a Customer Drawing for
your approval.
This drawing will have a unique Part Number specific to your
configuration, which you should reference whenever you make an
inquiry or place an order.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
DC Requirements
DC1 DC2 DC3 DC4 DC5 DC6 DC7 DC8
Current (A)
Voltage (V)
Blade Length Standard
Premate
1. AC INPUT
❏No AC input required ❏125 VAC spacing ❏250 VAC spacing
2. SIGNAL CONTACTS
❏No signal contacts required ❏6 contacts ❏24 contacts ❏30 contacts ❏Other: ________________
❏Signal sequencing required (two pin lengths available; write requirements under NOTES below.)
3. DC INPUT/OUTPUT
Write the current, voltage and sequencing requirements for each of the DC lines required by your application. Tyco Electronics will use
this information to configure the DC side of your MINIPAK Connector with the appropriate number of contacts and contact spacing.
4. BOARD MOUNTING STYLE
Straight Socket (choose one) Right Angle Blade (choose one)
❏Short solder tail (.062" thick boards) ❏Short solder tail (for .062" thick boards)
❏Long solder tail (.093/.125" thick boards) ❏Long solder tail (.093/.125" thick boards)
❏Compliant press-fit tails (.093" min. thick board recommended)
5. OTHER REQUIREMENTS
❏Alignment guides required
❏Connector length restriction, if any: ________ " (________ mm)
For further clarity, you can attach a sketch to this form if necessary.
❏Sketch attached: _____ pages
NOTES:
AMP, ELCON, MINIPAK, TE LOGO and TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
4
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
MINIPAK Custom Connector Worksheet
AMP & ELCON Power Connector Layout Forms
5
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
FLATPAQ Connector Layout Form
AMP & ELCON Power Connector Layout Forms
Write the “FP” numbers to indicate the layout of one half of the connector assembly, matching the left to right order with the mating face view of the connector (right angle assembly tails facing downwards).
FP FP FP FP FP FP FP FP FP FP FP FP FP FP Solder Tail Options
❏.115" (2.9 mm); .062" thick boards
❏.177" (4.5 mm); .093/.125" boards
FP FP FP FP FP FP FP FP FP FP FP FP FP FP Solder Tail Options
❏.115" (2.9 mm); .062" thick boards
❏.177" (4.5 mm); .093/.125" boards
Write the “FP” numbers to indicate the layout of the mate of the above assembly, matching the left to right order with the mating face view of the connector (right angle assembly tails facing downwards).
Right Angle
Mount
250 V Power Modules
FP151
Standard Blade
FP105
Float, Standard
FP205
Hot Plug, Press-fit
FP152
Premate Blade
FP106
Float, Premate
FP206
Hot Plug, Press-fit
FP153
Postmate Blade
FP107
Float, Postmate
FP207
Hot Plug, Press-fit
FP104
Hot Plug Socket
FP204
Hot Plug, Press-fit
FP512
Spacer, 250 V
Signal Modules
FP302
24-Pin
FP402
24-Pin, Press-fit
FP303
24-Pin Socket
FP403
24-Pin, Press-fit
FP314
6-Pin
FP414
6-Pin,
Press-fit
FP315
6-Pin Socket
FP415
6-Pin,
Press-fit
600 V Power Modules
FP155
Standard Blade
FP121
Float, Standard
FP221
Hot Plug, Press-fit
FP156
Premate Blade
FP122
Float, Premate
FP222
Hot Plug, Press-fit
FP157
Postmate Blade
FP123
Float, Postmate
FP223
Hot Plug, Press-fit
FP120
Hot Plug Socket
FP220
Hot Plug,
Press-fit
FP514
Spacer, 600 V
Mounts
FP500
Left Flange
Mount
FP501
Right Flange
Mount
Guides
Right Angle
Guide Sockets
FP506 Passive
FP516 Active
FP507
Right Angle
Passive
Guide Pin
Signal Modules
FP300
24-Pin
FP400
24-Pin, Press-fit
FP318
24-Pin Socket
FP418
24-Pin Skt, Press-fit
FP301
24-Pin Skt, 3A Rated
FP401
24-Pin Skt, 3A, Press-fit
FP312
6-Pin
FP412
6-Pin,
Press-fit
FP313
6-Pin Socket,
3A rated
FP413
6-Pin Skt,
3A, Press-fit
600 V Power Modules
FP154
Socket, Solder
FP254
Socket, Press-fit
FP116
Hot Plug, Solder
FP216
Hot Plug, Press-fit
FP165
Standard Blade
FP117
Float, Standard
FP217
Hot Plug,
Press-fit
FP166
Premate Blade
FP118
Float, Premate
FP218
Hot Plug,
Press-fit
FP167
Postmate Blade
FP119
Float, Postmate
FP219
Hot Plug,
Press-fit
FP513
Spacer, 600 V
Mounts
FP500
Left Flange
Mount
FP501
Right Flange
Mount
Guides
FP502
Straight
Passive
Guide Socket
Straight Guide Pins
FP503 Passive
FP515 Active, M3
FP517 Active, 4-40
Straight Mount 250 V Power Modules
FP150
Socket, Solder
FP250
Socket, Press-fit
FP100
Hot Plug, Solder
FP200
Hot Plug, Press-fit
FP161
Standard Blade
FP101
Float, Standard
FP201
Hot Plug,
Press-fit
FP162
Premate Blade
FP102
Float, Premate
FP202
Hot Plug,
Press-fit
FP163
Postmate Blade
FP103
Float, Postmate
FP203
Hot Plug,
Press-fit
FP511
Spacer, 250 V
Note: All modules
are solder tail
termination unless
indicated as
compliant Press-fit.
Select solder tail
length using check
boxes to the right of
the connector layout
grid above. 0.093" or
thicker boards are
recommended for
compliant
Press-fit termination
style. Consult
Tyco Electronics
for signal module
sequencing. See
Catalog 1773096 for
benefits of Hot Plug
and Float options.
AMP, ELCON, FLATPAQ, TE LOGO and TYCO ELECTRONICS
are trademarks of Tyco Electronics Corporation.
Instructions
1. Indicate the connector layout by filling in the FP number of each mod-
ule required in the boxes, one per box. Use one form per mated pair.
2. Left to right order of the modules should match mating face views of
the connector. When laying out right angle assemblies, make sure you
look at the mating face with the termination tails facing downwards.
3. For solder terminated assemblies, indicate the tail length for
each half of the connector using the checkboxes to the right of the
layout grid.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
Upon receipt of this form, Tyco Electronics will generate a Customer
Drawing for you to check and approve prior to connector production.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
6
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Mini Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if you
need a size #20 premate PCB tail contact to be installed in contact
position #10, write “E” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648110-1 #12, #20, #12 Pin Housing, Float or Fixed Mounting
1648111-1 #16, #20, #16 Pin Housing, Float or Fixed Mounting
1648112-1 #16, #20, #12 Pin Housing, Float or Fixed Mounting
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
G = 1766194-1 Crimp, standard
H = 1766198-1 Crimp, premate
#16 J = 1766199-1 Crimp, postmate
K = 1766222-1 PCB tail, standard
L = 1766223-1 PCB tail, premate
M = 1766818-1 PCB tail, postmate
N = 1766193-1 Crimp, standard
P = 1766195-1 Crimp, premate
#12 Q = 1766196-1 Crimp, postmate
R = 1766245-1 PCB tail, standard
S = 1766250-1 PCB tail, premate
T = 1766249-1 PCB tail, postmate
U = 1650153-2 Crimp, standard, Hot Plug
#12 Hot V = 1650156-2 Crimp, premate, Hot Plug
Plug W = 1650060-2 PCB tail, standard, Hot Plug
X = 1650074-3 PCB tail, premate, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Crimp contacts are removable. PCB tail contacts are non-removable.
1648110-1 – #12 or #12HP
1648111-1 – #16 only
1648112-1 – #16 only
1648110-1 – #12 or #12HP
1648111-1 – #16 only
1648112-1 – #12 or #12HP
#20 on all housings
1
2
5
6
7
8
9
10
11
3
4
22
14
15
18
21
16
17
19
20
12
13
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
7
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Mini Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if you
need a size #20 PCB tail contact to be installed in contact position #8,
write “C” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Selection Menu Check
Part Number Description One
1648115-1 #12, #20, #12 Socket Housing, Float or Fixed Mounting
1648116-1 #16, #20, #16 Socket Housing, Float or Fixed Mounting
1648117-1 #16, #20, #12 Socket Housing, Float or Fixed Mounting
Socket Contact Selection Menu
Size Ref. Part Number Termination Style Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
D = 6648319-1 Crimp
#16 E = 6648306-1 Compliant Press-fit
F = 6648383-1 PCB Tail
G = 6648318-1 Crimp
#12 H = 6648304-1 Compliant Press-fit
J = 6648374-1 PCB Tail
#12 Hot K = 1648384-1 Crimp, Hot Plug
Plug L = 6648305-1 Compliant Press-fit, Hot Plug
M = 1648387-1 PCB Tail, Hot Plug
Submit to your local Tyco Electronics Sales Engineer.
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
1
2
3
4
56
7
89
12
13
14 15
18
16
10
17
19
11
21
22
20
1648115-1 – #12 or #12HP
1648116-1 – #16 only
1648117-1 – #16 only
1648115-1 – #12 or #12HP
1648116-1 – #16 only
1648117-1 – #12 or #12HP
#20 on all housings
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
8
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Lower Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if you
need a size #20 premate PCB tail contact to be installed in contact
position #10, write “E” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648203-1 #12, #20, #12 Pin Housing, Float or Fixed Mounting
1648204-1 #16, #20, #16 Pin Housing, Float or Fixed Mounting
1648205-1 #16, #20, #12 Pin Housing, Float or Fixed Mounting
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
G = 1766194-1 Crimp, standard
H = 1766198-1 Crimp, premate
#16 J = 1766199-1 Crimp, postmate
K = 1766222-1 PCB tail, standard
L = 1766223-1 PCB tail, premate
M = 1766818-1 PCB tail, postmate
N = 1766193-1 Crimp, standard
P = 1766195-1 Crimp, premate
#12 Q = 1766196-1 Crimp, postmate
R = 1766245-1 PCB tail, standard
S = 1766250-1 PCB tail, premate
T = 1766249-1 PCB tail, postmate
U = 1650153-2 Crimp, standard, Hot Plug
#12 Hot V = 1650156-2 Crimp, premate, Hot Plug
Plug W = 1650060-2 PCB tail, standard, Hot Plug
X = 1650074-3 PCB tail, premate, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Crimp contacts are removable. PCB tail contacts are non-removable.
12
34
8910
11
14 15 16
12 13
567
26
21
20
25
2423
22
29
28
27
18
17 19
1648203-1 – #12 or #12HP
1648204-1 – #16 only
1648205-1 – #16 only
1648203-1 – #12 or #12HP
1648204-1 – #16 only
1648205-1 – #12 or #12HP
#20 on all housings
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
9
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Lower Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if you
need a size #20 PCB tail contact to be installed in contact position #8,
write “C” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Selection Menu Check
Part Number Description One
1648206-1 #12, #20, #12 Socket Housing, Float or Fixed Mounting
1648207-1 #16, #20, #16 Socket Housing, Float or Fixed Mounting
1648208-1 #16, #20, #12 Socket Housing, Float or Fixed Mounting
Socket Contact Selection Menu
Size Ref. Part Number Termination Style Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
D = 6648319-1 Crimp
#16 E = 6648306-1 Compliant Press-fit
F = 6648383-1 PCB Tail
G = 6648318-1 Crimp
#12 H = 6648304-1 Compliant Press-fit
J = 6648374-1 PCB Tail
#12 Hot K = 1648384-1 Crimp, Hot Plug
Plug L = 6648305-1 Compliant Press-fit, Hot Plug
M = 1648387-1 PCB Tail, Hot Plug
Submit to your local Tyco Electronics Sales Engineer.
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
12
3
4
5
67
8
9
10
11
13
14
15
18
16
17
19
21
22 20
12
24
25 23
27 26
2829
1648206-1 – #12 or #12HP
1648207-1 – #16 only
1648208-1 – #16 only
1648206-1 – #12 or #12HP
1648207-1 – #16 only
1648208-1 – #12 or #12HP
#20 on all housings
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
10
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
75A Middle Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if you
need a non-hot plug size #12 premate PCB tail contact to be installed
in contact position #8, write “Q” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648162-1 Float Mount for Crimp Contacts
1648163-1 Flush PCB Mount for PCB Tail Contacts
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766192-1 Crimp, standard
#8 B = 1766197-1 Crimp, premate
C = 1766262-1 PCB tail, standard
D = 1766263-1 PCB tail, premate
E = 1650155-1 Crimp, standard
F = 1650161-1 Crimp, premate
#20 G = 1650162-2 Crimp, postmate
H = 1650283-1 PCB tail, standard
J = 1650065-1 PCB tail, premate
K = 1650226-1 PCB tail, postmate
L = 1766193-1 Crimp, standard
M = 1766195-1 Crimp, premate
#12 N = 1766196-1 Crimp, postmate
P = 1766245-1 PCB tail, standard
Q = 1766250-1 PCB tail, premate
R = 1766249-1 PCB tail, postmate
S = 1650153-2 Crimp, standard, Hot Plug
#12 Hot T = 1650156-2 Crimp, premate, Hot Plug
Plug U = 1650060-2 PCB tail, standard, Hot Plug
V = 1650074-3 PCB tail, premate, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Crimp contacts are removable. PCB tail contacts are non-removable.
Size #8
Size #20
Size #12 or
#12 HP
1
2
3
4
56
789
12 11 10
15 14 13
18 17 1621 20 19
24 23 22
27 26 25
30 29 28
33 32 31
34
35
3637
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
11
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
75A Middle Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
contact in the appropriate contact positions on the drawing: e.g., if you
need a non-hot plug size #12 PCB tail contact to be installed in contact
position #8, write “J” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Selection Menu Check
Part Number Description One
6648167-1 Float Mount for Crimp Contacts
1648168-1 PCB Mount for PCB Tail and Press-fit Contacts
Socket Contact Selection Menu
Size Ref. Part Number Termination Style Qty.
A = 6648317-1 Crimp
#8 B = 6648351-1 Knurled Press-fit
C = 6648400-1 PCB Tail
D = 1648325-1 Crimp
#20 E = 6648294-1 Compliant Press-fit (Flush)
F = 1648382-1 PCB Tail
G = 6648318-1 Crimp
#12 H = 6648304-1 Compliant Press-fit
J = 6648374-1 PCB Tail
#12 Hot K = 1648384-1 Crimp, Hot Plug
Plug L = 6648305-1 Compliant Press-fit, Hot Plug
M = 1648387-1 PCB Tail, Hot Plug
Submit to your local Tyco Electronics Sales Engineer.
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
123
456
789
12
1110 15
14
13
18
17 21
20
19
24
23
22 27
26
25
30
29 33
32
31
34 35
36 37
16
28
Size #8
Size #20
Size #12 or
#12 HP
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
12
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
125A Middle Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a non-hot plug size #12 premate PCB tail
contact to be installed in contact position #4, write “Q” in circle #4.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648151-1 Float Mount Pin Housing
1648152-1 PCB Mount Pin Housing
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766232-1 Crimp, standard
#4 B = 1766812-1 1/4-20 External Thread
C = 1766283-1 M5 Internal Thread
E = 1650155-1 Crimp, standard
F = 1650161-1 Crimp, premate
#20 G = 1650162-2 Crimp, postmate
H = 1650283-1 PCB tail, standard
J = 1650065-1 PCB tail, premate
K = 1650226-1 PCB tail, postmate
L = 1766193-1 Crimp, standard
M = 1766195-1 Crimp, premate
#12 N = 1766196-1 Crimp, postmate
P = 1766245-1 PCB tail, standard
Q = 1766250-1 PCB tail, premate
R = 1766249-1 PCB tail, postmate
S = 1650153-2 Crimp, standard, Hot Plug
#12 Hot T = 1650156-2 Crimp, premate, Hot Plug
Plug U = 1650060-2 PCB tail, standard, Hot Plug
V = 1650074-3 PCB tail, premate, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
1
2
3
45
6
7
8
9
12 11
10
15 14
13
18
17 16
21
20 19
24 23 22
27 26 25
30 29 28
33 32
31
34
35
39
40
38 37 36
Size #4
Size #20
Size #12 or
#12 HP
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
13
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
125A Middle Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a non-hot plug size #12 PCB tail contact to
be installed in contact position #4, write “J” in circle #4.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Selection Menu Check
Part Number Description One
1648156-1 Float Mount for Crimp Contacts
1648157-1 PCB Mount for PCB Tail and Press-fit Contacts
Socket Contact Selection Menu
Size Ref. Part Number Termination Style Qty.
A = 6648434-1 Crimp
#4 B = 6648435-1 1/4-20 External Thread
C = 6648335-1 M5 Internal Thread
D = 1648325-1 Crimp
#20 E = 6648301-1 Compliant Press-fit
F = 1648382-1 PCB Tail
G = 6648318-1 Crimp
#12 H = 6648304-1 Compliant Press-fit
J = 6648374-1 PCB Tail
#12 Hot K = 1648384-1 Crimp, Hot Plug
Plug L = 6648305-1 Compliant Press-fit, Hot Plug
M = 1648387-1 PCB Tail, Hot Plug
Submit to your local Tyco Electronics Sales Engineer.
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650106-1 Screw, No 6-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Crimp and Threaded contacts are removable. Press-fit and PCB tail contacts are
non-removable.
12 3
45 6
798
12
11
10
15
14
13
18
17
16
21
20
19
2423
22
27
26
25
30
29
28
33
32
31
34
35
39 40
383736
Size #4
Size #20
Size #12 o
r
#12 HP
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
14
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
200A Middle Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #4 external thread contact to be
installed in contact position #25, write “B” in circle #25.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1648134-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
25
19
12
10 9
7
8
24
23 20
2122
18 17
16
15
14 13
11
654
1
23
Size #4
Size #20
Size #8
Size #12 or
#12HP
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
#4 A = 1766232-1 Crimp, standard
B = 1766812-1 1/4-20 External Thread
#8 C = 1766192-1 Crimp, standard
D = 1766197-1 Crimp, premate
E = 1650155-1 Crimp, standard
F = 1650161-1 Crimp, premate
#20 G = 1650162-2 Crimp, postmate
H = 1650283-1 PCB tail, standard
J = 1650065-1 PCB tail, premate
K = 1650226-1 PCB tail, postmate
L = 1766193-1 Crimp, standard
M = 1766195-1 Crimp, premate
#12 N = 1766196-1 Crimp, postmate
P = 1766245-1 PCB tail, standard
Q = 1766250-1 PCB tail, premate
R = 1766249-1 PCB tail, postmate
S = 1650153-2 Crimp, standard, Hot Plug
#12 Hot T = 1650156-2 Crimp, premate, Hot Plug
Plug U = 1650060-2 PCB tail, standard, Hot Plug
V = 1650074-3 PCB tail, premate, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
15
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
200A Middle Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #4 external thread contact to be
installed in contact position #25, write “B” in circle #25.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1648135-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
25
19
12
910
4
8
24
20 23
22
21
17 18
16
15
13 14
11
567
3
21
Size #4
Size #20
Size #8
Size #12 or
#12HP
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
#4 A = 6648434-1 Crimp
B = 6648435-1 1/4-20 External Thread
#8 C = 6648317-1 Crimp
D = 6648400-1 PCB Tail
#20 E = 1648325-1 Crimp
F = 1648382-1 PCB Tail
#12 G = 6648318-1 Crimp
H = 6648374-1 PCB Tail
#12 Hot J = 1648384-1 Crimp, Hot Plug
Plug K = 1648387-1 PCB Tail, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. Press-fit and PCB tail contacts are
non-removable.
16
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Square Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired PCB tail
contact in the appropriate contact positions on the drawing: e.g., if
you need a non-hot plug size #12 standard PCB tail contact to be
installed in contact position #1, write “K” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1648132-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
12
10 9
7
8
13
11
6
543
1
2
14
15
16
17 19
18
20
21
22
23 25
24
26
2728
29 31
30
32
33
34
35
37
36
38
39
40
Size #20
Size #12 o
r
#12HP
Size #12 o
r
#12HP
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
G = 1766193-1 Crimp, standard
H = 1766195-1 Crimp, premate
#12 J = 1766196-1 Crimp, postmate
K = 1766245-1 PCB tail, standard
L = 1766250-1 PCB tail, premate
M = 1766249-1 PCB tail, postmate
N = 1650153-2 Crimp, standard, Hot Plug
#12 Hot P = 1650156-2 Crimp, premate, Hot Plug
Plug Q = 1650060-2 PCB tail, standard, Hot Plug
R = 1650074-3 PCB tail, premate, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. PCB tail contacts are non-removable.
17
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Square Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a non-hot plug size #12 PCB tail contact to be
installed in contact position #1, write “F” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1648133-1 = Fixed Mount only
Submit to your local Tyco Electronics Sales Engineer.
12
10
9
78
13 11
6
5
4
3
12
14
15 16 17
19
18
20
21 22 23
25
24
26
27 28 29
31
30
32
33 34 35
37
36
38
39 40
Size #20
Size #12 o
r
#12HP
Size #12 o
r
#12HP
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
D = 6648318-1 Crimp
#12 E = 6648304-1 Compliant Press-fit
F = 6648374-1 PCB Tail
G = 1648384-1 Crimp, Hot Plug
#12 Hot H = 6648305-1 Compliant Press-fit, Hot Plug
Plug J = 1648387-1 PCB Tail, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
18
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Top Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #20 premate PCB tail standard con-
tact to be installed in contact position #10, write “Q” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766811-1 Crimp
B = 1766819-1 Probe Proof, crimp
C = 1766230-1 1/4-20 Internal Thread
D = 1766274-1 M6 x 1 Internal Thread
#0 E = 1766269-1 Probe Proof, 1/4-20 Internal Thread
F = 1766275-1 Probe Proof, M6 x 1 Internal Thread
G = 1766268-1 1/4-20 External Thread
H = 1766231-1 M6 x 1 External Thread
J = 1766270-1 Probe Proof, 1/4-20 External Thread
K = 1766276-1 Probe Proof, M6 x 1 External Thread
L = 1650155-1 Crimp, standard
M = 1650161-1 Crimp, premate
#20 N = 1650162-2 Crimp, postmate
P = 1650283-1 PCB tail, standard
Q = 1650065-1 PCB tail, premate
R = 1650226-1 PCB tail, postmate
S = 1766194-1 Crimp, standard
T = 1766198-1 Crimp, premate
#16 U = 1766199-1 Crimp, postmate
V = 1766222-1 PCB tail, standard
W = 1766223-1 PCB tail, premate
X = 1766818-1 PCB tail, postmate
Y = 1766193-1 Crimp, standard
Z = 1766195-1 Crimp, premate
#12 AA = 1766196-1 Crimp, postmate
AB = 1766245-1 PCB tail, standard
AC = 1766250-1 PCB tail, premate
AD = 1766249-1 PCB tail, postmate
AE = 1650153-2 Crimp, standard, Hot Plug
#12 Hot AF = 1650156-2 Crimp, premate, Hot Plug
Plug AG = 1650060-2 PCB tail, standard, Hot Plug
AH = 1650074-3 PCB tail, premate, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of
Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
Pin Housing Selection Menu Check
Part Number Description One
1648183-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
19
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Top Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
Place an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each socket contact you require for each socket
assembly in the Qty column of the Socket Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded, Press-fit and PCB
tail contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the draw-
ing: e.g., if you need a non-hot plug size #12 PCB tail contact to be
installed in contact position #51, write “U” in circle #51.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648405-1 Crimp
B = 6648418-1 Probe Proof, crimp
C = 6648416-1 1/4-20 Internal Thread
D = 6648428-1 M6 x 1 Internal Thread
#0 E = 6648419-1 Probe Proof, 1/4-20 Internal Thread
F = 6648429-1 Probe Proof, M6 x 1 Internal Thread
G = 6648417-1 1/4-20 External Thread
H = 6648430-1 M6 x 1 External Thread
J = 6648420-1 Probe Proof, 1/4-20 External Thread
K = 6648431-1 Probe Proof, M6 x 1 External Thread
L = 1648325-1 Crimp
#20 M = 6648301-1 Compliant Press-fit
N = 1648382-1 PCB Tail
P = 6648319-1 Crimp
#16 Q = 6648306-1 Compliant Press-fit
R = 6648383-1 PCB Tail
S = 6648318-1 Crimp
#12 T = 6648304-1 Compliant Press-fit
U = 6648374-1 PCB Tail
V = 1648384-1 Crimp, Hot Plug
#12 Hot W = 6648305-1 Compliant Press-fit, Hot Plug
Plug X = 1648387-1 PCB Tail, Hot Plug
21
10 9 8 7 6 5 4
1718
3
141516 111213
242526 212223
34
1920
313233 282930 27
40 39 38 37 36 35
46 45 44 43 42 41
49 48 47
52 51 50
Size #16
Size #20
Size #0
Size #12 or
#12HP
G2 G1
G4 G3
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. Press-fit and PCB tail contacts are
non-removable.
Pin Housing Selection Menu Check
Part Number Description One
1648186-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
20
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Double Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded and PCB tail
contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a size #20 premate PCB tail contact to be
installed in contact position #13, write “Q” in circle #13.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648552-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766811-1 Crimp
B = 1766819-1 Probe Proof, crimp
C = 1766230-1 1/4-20 Internal Thread
D = 1766274-1 M6 x 1 Internal Thread
#0 E = 1766269-1 Probe Proof, 1/4-20 Internal Thread
F = 1766275-1 Probe Proof, M6 x 1 Internal Thread
G = 1766268-1 1/4-20 External Thread
H = 1766231-1 M6 x 1 External Thread
J = 1766270-1 Probe Proof, 1/4-20 External Thread
K = 1766276-1 Probe Proof, M6 x 1 External Thread
L = 1650155-1 Crimp, standard
M = 1650161-1 Crimp, premate
#20 N = 1650162-2 Crimp, postmate
P = 1650283-1 PCB tail, standard
Q = 1650065-1 PCB tail, premate
R = 1650226-1 PCB tail, postmate
S = 1766193-1 Crimp, standard
T = 1766195-1 Crimp, premate
#12 U = 1766196-1 Crimp, postmate
V = 1766245-1 PCB tail, standard
W = 1766250-1 PCB tail, premate
X = 1766249-1 PCB tail, postmate
Y = 1650153-2 Crimp, standard, Hot Plug
#12 Hot Z = 1650156-2 Crimp, premate, Hot Plug
Plug AA = 1650060-2 PCB tail, standard, Hot Plug
AB = 1650074-3 PCB tail, premate, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
12
34
5678
910
11 12
18 19 20
26 27 28
34 35 36
39
17
25
33
37 38
13 14 15 16
21 22 23 24
29 30 31 32
Size #20
Size #12 or
#12HP
Size #0
Size #12 or
#12HP
G1 G2
G3 G4
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. PCB tail contacts are non-removable.
21
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
Double Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
Place an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each socket contact you require for each socket
assembly in the Qty column of the Socket Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded, Press-fit and PCB
tail contacts are installed by Tyco Electronics; enter the letter reference
of the desired contact in the appropriate contact positions on the
drawing: e.g., if you need a non-hot plug size #12 PCB tail contact to
be installed in contact position #8, write “R” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Submit to your local Tyco Electronics Sales Engineer.
21
43
8765
12 11 10 9
31 30 29
34 33 32
23 22 21
26 25 24
37
39 38
15 14 13
18 17 16
36
28
20
35
27
19
Size #20
Size #12 or
#12HP
Size #0
Size #12 or
#12HP
G2 G1
G4 G3
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Housing Selection Menu Check
Part Number Description One
1648578-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648405-1 Crimp
B = 6648418-1 Probe Proof, crimp
C = 6648416-1 1/4-20 Internal Thread
D = 6648428-1 M6 x 1 Internal Thread
#0 E = 6648419-1 Probe Proof, 1/4-20 Internal Thread
F = 6648429-1 Probe Proof, M6 x 1 Internal Thread
G = 6648417-1 1/4-20 External Thread
H = 6648430-1 M6 x 1 External Thread
J = 6648420-1 Probe Proof, 1/4-20 External Thread
K = 6648431-1 Probe Proof, M6 x 1 External Thread
L = 1648325-1 Crimp
#20 M = 6648301-1 Compliant Press-fit
N = 1648382-1 PCB Tail
P = 6648318-1 Crimp
#12 Q = 6648304-1 Compliant Press-fit
R = 6648374-1 PCB Tail
S = 1648384-1 Crimp, Hot Plug
#12 Hot T = 6648305-1 Compliant Press-fit, Hot Plug
Plug U = 1648387-1 PCB Tail, Hot Plug
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp and Threaded contacts are removable. Press-fit and PCB tail contacts are
non-removable.
22
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
DualPower Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766811-1 Crimp
B = 1766819-1 Probe Proof, crimp
C = 1766230-1 1/4-20 Internal Thread
D = 1766274-1 M6 x 1 Internal Thread
#0 E = 1766269-1 Probe Proof, 1/4-20 Internal Thread
F = 1766275-1 Probe Proof, M6 x 1 Internal Thread
G = 1766268-1 1/4-20 External Thread
H = 1766231-1 M6 x 1 External Thread
J = 1766270-1 Probe Proof, 1/4-20 External Thread
K = 1766276-1 Probe Proof, M6 x 1 External Thread
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 1/4-20 external thread contact to be
installed in contact position #1, write “G” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648549-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Submit to your local Tyco Electronics Sales Engineer.
12
G1 G2
G3 G4
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
23
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
DualPower Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
Place an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 1/4-20 external thread contact to be
installed in contact position #1, write “G” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Submit to your local Tyco Electronics Sales Engineer.
Socket Housing Selection Menu Check
Part Number Description One
1648575-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648405-1 Crimp
B = 6648418-1 Probe Proof, crimp
C = 6648416-1 1/4-20 Internal Thread
D = 6648428-1 M6 x 1 Internal Thread
#0 E = 6648419-1 Probe Proof, 1/4-20 Internal Thread
F = 6648429-1 Probe Proof, M6 x 1 Internal Thread
G = 6648417-1 1/4-20 External Thread
H = 6648430-1 M6 x 1 External Thread
J = 6648420-1 Probe Proof, 1/4-20 External Thread
K = 6648431-1 Probe Proof, M6 x 1 External Thread
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
G2
21
G1
G4 G3
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
24
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
QuadPower Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Choose one housing from the Pin Housing Selection Menu table. Place
an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 1/4-20 external thread contact to be
installed in contact position #1, write “G” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Selection Menu Check
Part Number Description One
1648548-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766811-1 Crimp
B = 1766819-1 Probe Proof, crimp
C = 1766230-1 1/4-20 Internal Thread
D = 1766274-1 M6 x 1 Internal Thread
#0 E = 1766269-1 Probe Proof, 1/4-20 Internal Thread
F = 1766275-1 Probe Proof, M6 x 1 Internal Thread
G = 1766268-1 1/4-20 External Thread
H = 1766231-1 M6 x 1 External Thread
J = 1766270-1 Probe Proof, 1/4-20 External Thread
K = 1766276-1 Probe Proof, M6 x 1 External Thread
Submit to your local Tyco Electronics Sales Engineer.
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
2
1
4
3
G1 G2
G3 G4
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
25
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
QuadPower Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Choose one housing from the Socket Housing Selection Menu table.
Place an X in the appropriate guide pin circles, if guide pins are required.
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 1/4-20 external thread contact to be
installed in contact position #1, write “G” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Submit to your local Tyco Electronics Sales Engineer.
Socket Housing Selection Menu Check
Part Number Description One
1648574-1 Housing without guides
Housing with guides (#6-32 thread)
Housing with guides (M3 x 0.5 thread)
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648405-1 Crimp
B = 6648418-1 Probe Proof, crimp
C = 6648416-1 1/4-20 Internal Thread
D = 6648428-1 M6 x 1 Internal Thread
#0 E = 6648419-1 Probe Proof, 1/4-20 Internal Thread
F = 6648429-1 Probe Proof, M6 x 1 Internal Thread
G = 6648417-1 1/4-20 External Thread
H = 6648430-1 M6 x 1 External Thread
J = 6648420-1 Probe Proof, 1/4-20 External Thread
K = 6648431-1 Probe Proof, M6 x 1 External Thread
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
21
43
G2 G1
G4 G3
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
26
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
In-Line QuadPower Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 M6 x 1 external thread contact to be installed
in contact position #1, write “H” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1651493-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
4
3
2
1
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766811-1 Crimp
B = 1766819-1 Probe Proof, crimp
C = 1766230-1 1/4-20 Internal Thread
D = 1766274-1 M6 x 1 Internal Thread
#0 E = 1766269-1 Probe Proof, 1/4-20 Internal Thread
F = 1766275-1 Probe Proof, M6 x 1 Internal Thread
G = 1766268-1 1/4-20 External Thread
H = 1766231-1 M6 x 1 External Thread
J = 1766270-1 Probe Proof, 1/4-20 External Thread
K = 1766276-1 Probe Proof, M6 x 1 External Thread
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
27
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
In-Line QuadPower Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #0 M6 x 1 external thread contact to be installed
in contact position #1, write “H” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1651404-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650399-1 Screw, No 10-32 UNC 2A
1650401-1 Screw, M5 x 0.8
Submit to your local Tyco Electronics Sales Engineer.
4
3
2
1
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648405-1 Crimp
B = 6648418-1 Probe Proof, crimp
C = 6648416-1 1/4-20 Internal Thread
D = 6648428-1 M6 x 1 Internal Thread
#0 E = 6648419-1 Probe Proof, 1/4-20 Internal Thread
F = 6648429-1 Probe Proof, M6 x 1 Internal Thread
G = 6648417-1 1/4-20 External Thread
H = 6648430-1 M6 x 1 External Thread
J = 6648420-1 Probe Proof, 1/4-20 External Thread
K = 6648431-1 Probe Proof, M6 x 1 External Thread
28
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
W5 Power Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #4 1/4-20 external thread contact to be installed
in contact position #1, write “B” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
6651457-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
4
5
3
2
1
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766232-1 Crimp, standard
#4 B = 1766812-1 1/4-20 External Thread
C = 1766283-1 M5 Internal Thread
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
29
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
W5 Power Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Threaded contacts are
installed by Tyco Electronics; enter the letter reference of the desired
threaded contact in the appropriate contact positions on the drawing:
e.g., if you need a size #4 1/2-20 external thread contact to be installed
in contact position #1, write “B” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
6651458-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
4
5
3
2
1
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648434-1 Crimp, standard
#4 B = 6648435-1 1/4-20 External Thread
C = 6648335-1 M5 Internal Thread
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Contacts are removable.
30
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
HV8P Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired contact
in the appropriate contact positions on the drawing: e.g., if you need
a non-hot plug size #12 premate PCB tail contact to be installed in
contact position #8, write “E” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1648127-1 = Fixed Mount
Submit to your local Tyco Electronics Sales Engineer.
12
34
56
78
Size #12 or
#12HP
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766193-1 Crimp, standard
B = 1766195-1 Crimp, premate
#12 C = 1766196-1 Crimp, postmate
D = 1766245-1 PCB tail, standard
E = 1766250-1 PCB tail, premate
F = 1766249-1 PCB tail, postmate
G = 1650153-2 Crimp, standard, Hot Plug
#12 Hot H = 1650156-2 Crimp, premate, Hot Plug
Plug J = 1650060-2 PCB tail, standard, Hot Plug
K = 1650074-3 PCB tail, premate, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. PCB tail contacts are non-removable.
31
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
HV8P Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a non-hot plug size #12 PCB tail contact to be
installed in contact position #8, write “C” in circle #8.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1648128-1 = Float Mount
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
2
43
8
6
1
7
5
Size #12 or
#12HP
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648318-1 Crimp
#12 B = 6648304-1 Compliant Press-fit
C = 6648374-1 PCB Tail
D = 1648384-1 Crimp, Hot Plug
#12 Hot E = 6648305-1 Compliant Press-fit, Hot Plug
Plug F = 1648387-1 PCB Tail, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
32
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P10S0 Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired contact in
the appropriate contact positions on the drawing: e.g., if you need a
hot plug size #12 premate PCB tail contact to be installed in contact
position #10, write “K” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1648568-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Size #12 or
#12HP
10
8
6
4
2
9
7
5
3
1
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1766193-1 Crimp, standard
B = 1766195-1 Crimp, premate
#12 C = 1766196-1 Crimp, postmate
D = 1766245-1 PCB tail, standard
E = 1766250-1 PCB tail, premate
F = 1766249-1 PCB tail, postmate
G = 1650153-2 Crimp, standard, Hot Plug
#12 Hot H = 1650156-2 Crimp, premate, Hot Plug
Plug J = 1650060-2 PCB tail, standard, Hot Plug
K = 1650074-3 PCB tail, premate, Hot Plug
Crimp contacts are removable. PCB tail contacts are non-removable.
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
33
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P10S0 Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each
socket assembly in the Qty column of the Socket Contact Selection
Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a hot plug size #12 PCB tail contact to be installed in
contact position #10, write “F” in circle #10.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1648596-1
Submit to your local Tyco Electronics Sales Engineer.
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 6648318-1 Crimp
#12 B = 6648304-1 Compliant Press-fit
C = 6648374-1 PCB Tail
D = 1648384-1 Crimp, Hot Plug
#12 Hot E = 6648305-1 Compliant Press-fit, Hot Plug
Plug F = 1648387-1 PCB Tail, Hot Plug
Size #12 or
#12HP
10
8
6
4
2
9
7
5
3
1
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
34
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P10S22 Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired contact
in the appropriate contact positions on the drawing: e.g., if you need
a non-hot plug size #12 standard PCB tail contact to be installed in
contact position #1, write “K” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1648211-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Size #20
Size #12
Size #12
1
3
2
4
6
5
28
30
29
31
32
9
13
17
21
25
8
12
16
20
24
27
11
15
19
23
26
7
10
14
18
22
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
G = 1766193-1 Crimp, standard
H = 1766195-1 Crimp, premate
#12 J = 1766196-1 Crimp, postmate
K = 1766245-1 PCB tail, standard
L = 1766250-1 PCB tail, premate
M = 1766249-1 PCB tail, postmate
N = 1650153-2 Crimp, standard, Hot Plug
#12 Hot P = 1650156-2 Crimp, premate, Hot Plug
Plug Q = 1650060-2 PCB tail, standard, Hot Plug
R = 1650074-3 PCB tail, premate, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. PCB tail contacts are non-removable.
35
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P10S22 Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each socket
assembly in the Qty column of the Socket Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a non-hot plug size #12 PCB tail contact to be
installed in contact position #1, write “F” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1648212-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Size #20
Size #12
Size #12
1
3
2
4
6
5
28
30
29
31
32
9
13
17
21
25
8
12
16
20
24
27
11
15
19
23
26
7
10
14
18
22
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
D = 6648318-1 Crimp
#12 E = 6648304-1 Compliant Press-fit
F = 6648374-1 PCB Tail
G = 1648384-1 Crimp, Hot Plug
#12 Hot H = 6648305-1 Compliant Press-fit, Hot Plug
Plug J = 1648387-1 PCB Tail, Hot Plug
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
36
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P12S12 Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired contact in
the appropriate contact positions on the drawing: e.g., if you need a
size #20 premate PCB tail contact to be installed in contact position #9,
write “E” in circle #9.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
1651202-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
2
Size #20
Size #16
Size #16
1
4 3
6
987
5
20 19
22 21
24 23
12 11 10
15 14 13
18 17 16
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
G = 1766194-1 Crimp, standard
H = 1766198-1 Crimp, premate
#16 J = 1766199-1 Crimp, postmate
K = 1766222-1 PCB tail, standard
L = 1766223-1 PCB tail, premate
M = 1766818-1 PCB tail, postmate
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. PCB tail contacts are non-removable.
37
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P12S12 Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each socket
assembly in the Qty column of the Socket Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a size #20 PCB tail contact to be installed in contact
position #9, write “C” in circle #9.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
1651203-1
Submit to your local Tyco Electronics Sales Engineer.
1
Size #20
Size #16
Size #16
2
3 4
5
789
6
19 20
21 22
23 24
10 11 12
13 14 15
16 17 18
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
D = 6648319-1 Crimp
#16 E = 6648306-1 Compliant Press-fit
F = 6648383-1 PCB Tail
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
38
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P0S30 Drawer Connector Pin Side Layout Form
AMP & ELCON Power Connector Layout Forms
Pin Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each pin contact you require for each pin
assembly in the Qty column of the Pin Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. PCB tail contacts are installed
by Tyco Electronics; enter the letter reference of the desired contact in
the appropriate contact positions on the drawing: e.g., if you need a
size #20 premate PCB tail contact to be installed in contact position #1,
write “E” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Pin Housing Part Number
6651204-1
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Submit to your local Tyco Electronics Sales Engineer.
Size #20
32 1
6 5 4
9 8 7
12 11 10
15 14 13
18 17 16
21 20 19
24 23 22
27 26 25
30 29 28
Pin Connector (Rear Face)
Pin Contact Insertion Side
Pin Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Pin Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1650155-1 Crimp, standard
B = 1650161-1 Crimp, premate
#20 C = 1650162-2 Crimp, postmate
D = 1650283-1 PCB tail, standard
E = 1650065-1 PCB tail, premate
F = 1650226-1 PCB tail, postmate
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. PCB tail contacts are non-removable.
39
Catalog 6-1773444-7 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 10-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: +44-(0) 800-267-666
P0S30 Drawer Connector Socket Side Layout Form
AMP & ELCON Power Connector Layout Forms
Socket Assembly
1. Enter company and contact information (at right).
2. Write the total quantity of each socket contact you require for each socket
assembly in the Qty column of the Socket Contact Selection Menu table.
3. Crimp contacts are shipped uninstalled. Press-fit and PCB tail contacts
are installed by Tyco Electronics; enter the letter reference of the
desired contact in the appropriate contact positions on the drawing:
e.g., if you need a size #20 PCB tail contact to be installed in contact
position #1, write “C” in circle #1.
4. Sign, date and send the completed form to your local Tyco Electronics
Sales Engineer.
ENTER CUSTOMER INFORMATION
Company Location
Contact Name Title
Telephone Fax
Email Address
I am: ❏End user
❏Contract manufacturer (end user: )
Signature Today’s Date
Annual Quantity Required
Socket Housing Part Number
6651205-1
Submit to your local Tyco Electronics Sales Engineer.
Size #20
12 3
4 5 6
7 8 9
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
25 26 27
28 29 30
Socket Connector (Rear Face)
Socket Contact Insertion Side
Socket Connector Rear Face Cavity Identification
Top Assembly Part Number
Assigned by Tyco Electronics
Float Mount Shoulder Screw
Part Number Description Qty.
1650402-1 Screw, No 8-32 UNC 2A
1650589-1 Screw, M4 x 0.7
Socket Contact Selection Menu
Size Ref. Part Number Termination Style & Pin Length Qty.
A = 1648325-1 Crimp
#20 B = 6648301-1 Compliant Press-fit
C = 1648382-1 PCB Tail
AMP, ELCON, TE LOGO and TYCO ELECTRONICS are trademarks of Tyco Electronics Corporation.
Crimp contacts are removable. Press-fit and PCB tail contacts are non-removable.
Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
6-1773444-7–LUG–PDF–10-07
AMP & ELCON Power
Connector Layout Forms