SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Choice of Open-Collector, Open-Emitter, or
3-State Outputs
D
High-Impedance Output State for
Party-Line Applications
D
Single-Ended or Differential AND/NAND
Outputs
D
Single 5-V Supply
D
Dual Channel Operation
D
Compatible With TTL
D
Short-Circuit Protection
D
High-Current Outputs
D
Common and Individual Output Controls
D
Clamp Diodes at Inputs and Outputs
D
Easily Adaptable to SN55114 and SN75114
Applications
D
Designed for Use With SN55115 and
SN75115
description
The SN55113 and SN75113 dual differential line
drivers with 3-state outputs are designed to
provide all the features of the SN55114 and
SN75114 line drivers with the added feature of
driver output controls. Individual controls are
provided for each output pair, as well as a
common control for both output pairs. If any output
is low, the associated output is in a high-impedance state and the output can neither drive nor load the bus. This
permits many devices to be connected together on the same transmission line for party-line applications.
The output stages are similar to TTL totem-pole outputs, but with the sink outputs, YS and ZS, and the
corresponding active pullup terminals, YP and ZP, available on adjacent package pins.
The SN55113 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN75113 is characterized for operation over the temperature range of 0°C to 70°C.
Copyright 1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1ZP
1ZS
1YS
1YP
1A
1B
1C
GND
VCC
2ZP
2ZS
2YS
2YP
2A
2C
CC
SN55113 ...J OR W PACKAGE
SN75113 ...N PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
2ZS
2YS
NC
2YP
2A
1YS
1YP
NC
1A
1B
SN55113 . . . FK PACKAGE
(TOP VIEW)
1ZS
1ZP
NC
2C 2ZP
1C
GND
NC
NC – No internal connection
CC
V
CC
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FUNCTION TABLE
INPUTS OUTPUTS
OUTPUT CONTROL DATA AND NAND
C
CONTROL
CC A B†Y Z
L X X X Z Z
X L X XZ Z
H H LXL H
H H XLL H
H H HHH L
H = high level, L = low level, X = irrelevant,
Z = high impedance (off)
†B input and 4th line of function table are applicable only to
driver number 1.
logic symbol‡
2
2
2
2
1
1
1
1
2ZS
2ZP
2YS
2YP
1ZS
1ZP
1YS
1YP
11
6
5
10
9
7
&
&
&
2A
1B
1A
2C
CC
1C
14
15
13
12
2
1
3
4
EN2
EN1
‡This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for the J, N, and W packages.
logic diagram (positive logic)
2A
1B
1A
2C
CC
1C
11
6
5
10
9
7
2ZS
2ZP
2YS
2YP
1ZS
1ZP
1YS
1YP
14
15
13
12
2
1
3
4
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schematic
1ZP
Pullup
V
V
V
AND
Pullup
1YP
9 Ω4 kΩ
1 kΩ
900 Ω
100 Ω5 kΩ90 Ω
500 Ω
Input 1B
6
1YS
Output
Sink
AND
4
3
100 Ω
Output
Control
1C
4 kΩ1.6 kΩ
1 kΩ8GND
Common Output
Control CC
Output Control 2C
Input 2A
9
10
11
12 AND Pullup 2YP
13 AND Output 2YS
15 NAND Pullup 2ZP
14 NAND Output 2ZS
333 Ω
100 Ω500 Ω
90 Ω
900 Ω
600 Ω600 Ω
5 kΩ
4 kΩ600 Ω†1 kΩ
To
Other
Driver
Input 1A
5
4 kΩ9 Ω
100 Ω
VCC
NAND
Output
Sink
NAND
1ZS
16
2
1
V... VCC bus
7
‡
†
†
†
†These components are common to both drivers. Resistor values shown are nominal and in ohms.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡
Supply voltage, VCC (see Note 1) 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, VI 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Off-state voltage applied to open-collector outputs 12 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation (see Note 2) See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: SN55113 –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN75113 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: N package 260°C. . . . . . . . . . . . . . . . . . . . .
Case temperature for 60 seconds: FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package 300°C. . . . . . . . . . . . . . . .
‡Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
DISSIPATION RATING TABLE
PACKAGE TA ≤ 25°C
POWER RATING DERATING FACTOR
ABOVE TA = 25°CTA = 70°C
POWER RATING TA = 125°C
POWER RATING
FK 1375 mW 11.0 mW/°C 880 mW 275 mW
J 1375 mW 11.0 mW/°C 880 mW 275 mW
N1150 mW 9.2 mW/°C 736 mW N/A
W1000 mW 8.0 mW/°C640 mW 200 mW
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
SN55113 SN75113
UNIT
MIN NOM MAX MIN NOM MAX
UNIT
Supply voltage, VCC 4.5 5 5.5 4.75 5 5.25 V
High-level input voltage, VIH 2 2 V
Low-level input voltage, VIL 0.8 0.8 V
High-level output current, IOH – 40 – 40 mA
Low-level output current, IOL 40 40 mA
Operating free-air temperature, TA–55 125 0 70 °C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS†
SN55113 SN75113
UNIT
PARAMETER
TEST
CONDITIONS†
MIN TYP‡MAX MIN TYP‡MAX
UNIT
VIK Input clamp voltage VCC = MIN, II = –12 mA –0.9 –1.5 –0.9 –1.5 V
VOH
High-level output V
CC
= MIN, V
IH
= 2 V, IOH = –10 mA 2.4 3.4 2.4 3.4
V
V
OH
g
voltage
CC ,
VIL = 0.8 V
IH ,
IOH = –40 mA 2 3.0 2 3.0
V
VOL
Low-level output V
CC
= MIN, V
IH
= 2 V, V
IL
= 0.8 V
,
023
04
023
04
V
V
OL voltage
CC ,
IOL = 40 mA
IH ,
VIL
0.8
V,
0
.
23
0
.
4
0
.
23
0
.
4
V
V
OK Output clamp voltage VCC = MAX, IO = – 40 mA –1.1 –1.5 –1.1 –1.5 V
VOH =12V
TA = 25°C 1 10
IO( ff)
Off-state
o
p
en collector out
p
ut
VCC = MAX
V
OH =
12
V
TA = 125°C 200
µA
I
O(off) open-co
ll
ec
t
or ou
t
pu
t
cu
rr
e
nt
V
CC =
MAX
VOH= 5 25 V
TA = 25°C 1 10 µ
A
current
V
OH =
5
.
25
V
TA = 70°C 20
TA = 25°C, VO = 0 to VCC ±10 ±10
Off
-
state
VCC = MAX,
Ot t
VO = 0 –150 –20
IOZ
Off state
(high-impedance-state) Output
controls at
TA= MAX
VO = 0.4 V ±80 ±20 µA
output current
controls
at
0.8 V
T
A =
MAX
VO = 2.4 V ±80 ±20
VO = VCC 80 20
II
Input current
A, B, C
VCC = MAX
VI=55V
1 1
mA
I
Ia
max
mum
input voltage CC
V
CC =
MAX
,
V
I =
5
.
5
V
2 2
mA
IIH
High-level A, B, C
VCC = MAX
VI=24V
40 40
µA
I
IH
input current CC
V
CC =
MAX
,
V
I =
2
.
4
V
80 80 µ
A
IIL
Low-level A, B, C
VCC = MAX
VI=04V
–1.6 –1.6
mA
I
IL input current CC
V
CC =
MAX
,
V
I =
0
.
4
V
–3.2 –3.2
mA
IOS
Short-circuit
VCC = MAX
VO=0
TA=25
°
C
40
90
120
40
90
120
mA
I
OS output current§
V
CC =
MAX
,
V
O =
0
,
T
A =
25°C
–
40
–
90
–
120
–
40
–
90
–
120
mA
ICC
Supply current All inputs at 0 V, No load, VCC = MAX 47 65 47 65
mA
I
CC
y
(both drivers) TA = 25°CVCC = 7 V 65 85 65 85
mA
†All parameters with the exception of off-state open-collector output current are measured with the active pullup connected to the sink output. For
conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡All typical values are at TA = 25°C and VCC = 5 V, with the exception of VCC at 7 V.
§Only one output should be shorted at a time, and duration of the short-circuit should not exceed one second.
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics, VCC = 5 V, CL = 30 pF, TA = 25°C
PARAMETER
TEST CONDITIONS
SN55113 SN75113
UNIT
PARAMETER
TEST
CONDITIONS
MIN TYP MAX MIN TYP MAX
UNIT
tPLH Propagation delay time, low-to-high level output
See Figure 1
13 20 13 30 ns
tPHL Propagation delay time, high-to-low-level output
See
Fig
u
re
1
12 20 12 30 ns
tPZH Output enable time to high level RL = 180 Ω, See Figure 2 7 15 7 20 ns
tPZL Output enable time to low level RL = 250 Ω, See Figure 3 14 30 14 40 ns
tPHZ Output disable time from high level RL = 180 Ω, See Figure 2 10 20 10 30 ns
tPLZ Output disable time from low level RL = 250 Ω, See Figure 3 17 35 17 35 ns
PARAMETER MEASUREMENT INFORMATION
≤5 ns
90%
1.5 V
10%
Input
Output
VOLTAGE WAVEFORMS
tPHL
10%
1.5 V
90%
≤5 ns
TEST CIRCUIT
NAND
Output
CL = 30 pF
(see Note B)
(see Note B)
CL = 30 pF
Output
AND
1 kΩ
5 V
0 V
3 V
50 Ω
Input
(see Note A)
Generator
Pulse
VOH
1.5 V 1.5 V
tPLH
1.5 V 1.5 V
tPLH tPHL VOL
VOH
VOL
NAND
Output
AND
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
Figure 1. Test Circuit and Voltage Waveforms tPLH and tPHL
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
≤5 ns
90%
1.5 V
10%
Input
Output
VOLTAGE WAVEFORMS
1.5 V
tPZH
VOH
10%
1.5 V
90%
≤5 ns
TEST CIRCUIT
50 Ω
Input
(see Note A)
Generator
Pulse
CL = 30 pF
(see Note B)
(see Note B)
CL = 30 pF
AND
Output
1 kΩ
5 V
tPHZ Voff ≈ 0 V
0 V
3 V
0.5 V
RL
180 Ω
NAND
Output
Output
5 V
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms tPZH and tPHZ
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
3 V
0 V
5 V
tPLZ
5 V 1 kΩAND
Output
CL = 30 pF
(see Note B)
Pulse
Generator
(see Note A)
Input
50 Ω
TEST CIRCUIT
≤5 ns
90%
1.5 V 10%
VOL
0.5 V
tPZL
1.5 V
VOLTAGE WAVEFORMS
Output
Input 10% 1.5 V
90%
≤5 ns
NAND
Output
5 V
RL
250 Ω
Output
NOTES: A. The pulse generator has the following characteristics: ZO = 50 Ω, PRR ≤ 500 kHz, tw = 100 ns.
B. CL includes probe and jig capacitance.
CL = 30 pF
(see Note B)
Figure 3. Test Circuit and Voltage Waveforms, tPZL and tPLZ
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
8POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
Figure 4
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
3
2
1
0012
4
5
6
34
OUTPUT VOLTAGE
vs
DATA INPUT VOLTAGE
VI – Data Input Voltage – V
VCC = 5.5 V
VCC = 5 V
VCC = 4.5 V
No Load
TA = 25°C
VO – Output Voltage – V
ÁÁ
ÁÁ
ÁÁ
VO
3
2
1
0
4
5
6
VO – Output Voltage – V
ÁÁ
ÁÁ
VO
Figure 5
01234
OUTPUT VOLTAGE
vs
DATA INPUT VOLTAGE
VI – Data Input Voltage – V
TA = 125°C
TA = 25°C
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
TA = – 55°C
VCC = 5 V
No Load
Figure 6
VCC = 5.5 V
VCC = 5 V
VCC = 4.5 V
3
2
1
0012
4
5
6
34
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
Disabled High
VI – Input Voltage (Output Control) – V
Load = 500 Ω to GND
TA = 25°C
VO – Output Voltage – V
ÁÁÁ
ÁÁÁ
VO
Figure 7
Disabled
TA = 25°C
3
2
1
0012
4
5
6
34
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
VI – Input Voltage (Output Control) – V
TA = 125°C
TA = – 55°C
High
VCC = 5 V
Load = 500 Ω to GND
VO – Output Voltage – V
ÁÁ
ÁÁ
VO
†Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
Figure 8
3
2
1
0012
4
5
6
34
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
VI – Input Voltage (Output Control) – V
VCC = 5.5 V
VCC = 5 V
VCC = 4.5 V
Disabled Low
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Load = 500 Ω to VCC
TA = 25°C
VO – Output Voltage – V
ÁÁ
ÁÁ
VO
Figure 9
3
2
1
0012
4
5
6
34
OUTPUT VOLTAGE
vs
INPUT VOLTAGE (OUTPUT CONTROL)
VI – Input Voltage (Output Control) – V
Disabled Low
TA = 125°C
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
Load = 500 Ω to VCC
VCC = 5 V
TA = – 55°C
TA = 25°C
VO – Output Voltage – V
ÁÁ
ÁÁ
VO
Figure 10
1.2
0.8
0.4
0
–75 – 25 0 25 50
1.6
2
2.4
75 100 125
OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
VCC = 4.5 V
VOH(IOH = –10 mA)
VOL(IOL = 40 mA)
3.2
2.8
3.6
4
–50
VOH(IOH = – 40 mA)
VO – Output Voltage – V
ÁÁ
ÁÁ
VO
Figure 11
3
2
1
00 – 20 –100
4
5
–120
HIGH-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
– High-Level Output Voltage – V
IOH – Output Current – mA
VCC = 4.5 V
TA = 25°C
ÁÁ
ÁÁ
VO
–40 –60 –80
VCC = 5 V
VCC = 5.5 V
†Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
Figure 12
0.3
0.2
0.1
002040
0.4
0.5
0.6
50 80 100 120
LOW-LEVEL OUTPUT VOLTAGE
vs
OUTPUT CURRENT
TA = 25°C
VCC = 4.5 V
VCC = 5.5 V
IOL – Output Current – mA
VOL – Output Voltage – V
ÁÁÁ
ÁÁÁ
VOL
Figure 13
40
20
10
0012345
60
70
80
678
50
30
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY VOLTAGE
Inputs Grounded
Inputs Open
VCC – Supply Voltage – V
ÁÁÁÁ
ÁÁÁÁ
No Load
TA = 25°C
ICC – Supply Current – mA
ÁÁ
ÁÁ
CC
I
Figure 14
SUPPLY CURRENT
(BOTH DRIVERS)
vs
OUTPUT CURRENT
TA – Free-Air Temperature – °C
46
44
40
38
36
54
42
50
48
52
56
– 75 – 50 – 25 0 25 50 75 100 125
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
VCC = 5 V
Inputs Grounded
No Load
ICC – Supply Current – mA
ÁÁÁ
ÁÁÁ
CC
I
Figure 15
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁ
80
40
20
00.1 0.4 1 4 10 40 100
100
60
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY VOLTAGE
f – Frequency – MHz
TA = 25°C
Inputs: 3-V Square W ave
CL = 30 pF
RL = ∞
VCC = 5 V
90
70
50
30
10
ICC – Supply Current – mA
ÁÁ
ÁÁ
CC
I
†Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
SN55113, SN75113
DUAL DIFFERENTIAL LINE DRIVERS
SLLS070C – SEPTEMBER 1973 – REVISED MARCH 1997
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS†
Figure 16
PROPAGATION DELAY TIMES
FROM DATA INPUTS
vs
FREE-AIR TEMPERATURE
Propagation Delay T imes From Data Inputs – ns
TA – Free-Air Temperature – °C
10
8
4
2
0
18
6
14
12
16
20
– 75 – 50 – 25 0 25 50 75 100 125
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
VCC = 5 V
See Figure 1
CL = 30 pF
tPHL
tPLH
Figure 17
20
10
5
0
25
15
OUTPUT ENABLE AND DISABLE TIMES
vs
FREE-AIR TEMPERATURE
Output Enable and Disable Times – ns
30
– 75 – 50 – 25 0 25 50 75 100 125
TA – Free-Air Temperature – °C
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
See Figures 2 and 3
VCC = 5 V
tPLZ
tPZL
tPHZ
tPZH
†Data for temperatures below 0°C and above 70°C and for supply voltages below 4.75 V and above 5.25 V are applicable to SN55113 circuits
only. These parameters were measured with the active pullup connected to the sink output.
APPLICATION INFORMATION
Location 1
SN75113 Driver
SN75115 Receiver
Location 3
Location 2
Location 5
Location 4
RT‡
Location 6
Twisted
Pair
RT‡
‡RT = ZO. A capacitor may be connected in series with RT to reduce power dissipation.
Figure 18. Basic Party-Line or Data-Bus Differential Data Transmission
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated