DC/DC Converter TES 2H Series, 2 Watt * Small SMD package with standard footprint * * * * * * I/O isolatoin voltage 1500 VDC * * * * Unregulated device Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating Temperature range -40 to +85C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D Available in tape and reel package With their small footprint these 2 Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by leadfree reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. 3-year product warranty Models Order code Input voltage TES 2-0510H TES 2-0511H Output voltage Output current max. Efficiency typ. 3.3 VDC 500 mA 70 % 5.0 VDC 400 mA 73 % TES 2-0512H 5 VDC 10% 12 VDC 165 mA 77 % TES 2-0521H (5 VDC nominal) 5 VDC 200 mA 74 % TES 2-0522H 12 VDC 83 mA 76 % TES 2-0523H 15 VDC 66 mA 76 % 3.3 VDC 500 mA 72 % 5.0 VDC 400 mA 75 % Models TES 2-1210H TES 2-1211H 12 VDC 10% TES 2-1212H (12 VDC nominal) 12 VDC 165 mA 79 % TES 2-1222H 12 VDC 83 mA 80 % TES 2-1223H 15 VDC 66 mA 80 % TES 2-2410H 3.3 VDC 500 mA 72 % 5.0 VDC 400 mA 75 % TES 2-2411H 24 VDC 10% TES 2-2412H (24 VDC nominal) 12 VDC 165 mA 79 % TES 2-2422H 12 VDC 83 mA 79 % TES 2-2423H 15 VDC 66 mA 79 % http://www.tracopower.com Page 1 of 4 TES 2H Series, 2 Watt Input Specifications Input current no load / full load 5 Vin; 3.3 VDC model: 5 Vin; other models: 12 Vin; 3.3 VDC model: 12 Vin; other models: 24 Vin; 3.3 VDC model: 24 Vin; other models: 60 mA / 470 mA typ. 60 mA / 540 mA typ. 30 mA / 190 mA typ. 30 mA / 210 mA typ. 15 mA / 95 mA typ. 15 mA / 110 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Under voltage shut down 12 Vin models: 8 VDC typ. 24 Vin models: 16 VDC typ. 48 Vin models: 34 VDC typ. Reverse voltage protection 0.3 A max. Input filter internal capacitor Output Specifications Voltage set accuracy see graphs below Voltage balance (dual output models, balanced load) 1 % max. Regulation - Input variation 1.2 % / 1 % change Vin - Load variation 0 - 100 % see graphs below Minimum load not required Ripple and noise (20 MHz Bandwidth) 120 mVp-p max. Temperature coefficient 0.02 %/K typ. Short circuit protection limited 0.5s max. Capacitive load 3.3 & 5.0 VDC models: 47 F max. 12 & 5 VDC models: 10 F max. 12 & 15 VDC models: 4.7 F max. General Specifications Temperature ranges - Operating (convection cooling 20LFM, 0,1m/s) -40C to +85C - Case temperature +95C max. - Storage temperature -40C to +125C Derating (convection cooling) 4 %/K above 75C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >2`000`000 h Isolation voltage (60 sec.) 1'500 VDC Isolation capacitance (100 kHz, 1V) 60 pF typ. Isolation resistance (500 VDC) >10 Gohm Switching frequency 50 to 120 kHz typ. (depend on load) Physical Specifications Casing material plastic (UL94V-0 rated) Weight single output models: 1.5 g (0.05 oz) dual output models: 2.2 g (0.08 oz) Lead-free reflow solder process as per J-STD-020BD.1 (www.jedec.org) Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process not recommended. Product non-hermetical Environmental compliance - Reach www.tracopower.com/products/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 TES 2H Series, 2 Watt Output voltage variation dependent on load (at nominal input voltage) other models: +20% Deviation of Vout nom. Deviation of Vout nom. 3.3 & 5.0 VDC models: +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% +20% +15% +10% +5% max. 0% typ. min. -5% -10% 100% 0 20% 40% 60% Output Load 80% 100% Supporting documents: www.tracopower.com/overview/tes2h Outline Dimensions Single Output Models 2.54 (0.35) 5.08 (0.10) 1.5 (0.20) 6.15 6.15 (0.24) 12.3 1.3 (0.24) 0.25 (0.48) Pin Single 1 -Vin (GND) 2 +Vin (Vcc) 4 -Vout 5 +Vout 8 No con. No con. = Pin to be isolated from circuit (0.04) 5 3.0 9.3 (0.12) (0.37) 8 (0.06) O1.0 (O0.04) vent hole (for reflow soldering process) 1 2 0.6 Solder Pad 4 (0.02) 13.7 1.8 3.0 (0.12) 0-4 (0.06) (0.54) 2.54 (0.10) (0.52) (0.12) 13.1 3.04 S 8.9 0.30 (0.01) Pin-Out Dimensions in [mm], () = Inch Pin pitch tolearnce: 0.13 (0.005) Other tolerances: 0.25 (0.001) 5.08 (0.20) All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 TES 2H Series, 2 Watt Outline Dimensions Dual Output Models 2.54 5.08 (0.10) (0.35) 2.54 (0.20) 1.5 (0.10) 6.15 0-4 (0.06) 6.15 (0.24) 12.3 1.3 3.0 (0.12) (0.24) 0.25 (0.48) Pin Dual 1 -Vin (GND) 2 +Vin (Vcc) 4 Common 5 -Vout 7 +Vout 10 No con. No con. = Pin to be isolated from circuit (0.04) Solder Pad 3.0 9.3 (0.12) 1.8 7 (0.37) 10 (0.06) O1.0 (O0.04) vent hole (for reflow soldering process) 1 2 0.6 4 Dimensions in [mm], () = Inch Pin pitch tolearnce: 0.13 (0.005) Other tolerances: 0.25 (0.001) 5 (0.02) 16.3 (0.52) (0.12) 13.1 3.04 S 8.9 0.30 (0.01) Pin-Out (0.64) 2.54 (0.10) 5.08 (0.20) 2.54 (0.10) (c) Copyright 2018 Traco Electronic AG Specifications can be changed without notice! Rev. October 23, 2018 www.tracopower.com Page 4 of 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TES 2-0511H TES 2-0510H TES 2-1211H TES 2-1210H TES 2-2422H TES 2-0512H TES 2-2411H TES 2-1223H TES 2-2410H TES 2-1212H TES 2-2423H TES 2-0523H TES 2-1222H TES 2-0522H TES 2-0521H TES 2-2412H