https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Fuse modular terminal block, fuse type: Glass / ceramics / ..., connection method: Screw connection, cross section:0.2 mm- 4 mm, AWG: 24 - 12, nominal current: 32 A, nom. voltage: 400 V, width: 8.2 mm, fuse type: G / 6,3 x 32, mounting type: NS 35/7,5, NS 35/15, NS 32, color: black Your advantages Versions with LED Compact double-level fuse terminal block Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918155995 Weight per Piece (excluding packing) 37.600 g Custom tariff number 85369095 Country of origin Poland Technical data General Note For terminal marking, please use marking material with 8.2 mm pitch. For lever marking, please use flat marking material with 8.2 mm pitch. Number of levels 2 Number of connections 4 Nominal cross section 4 mm Color black Insulating material PA 09/28/2020Page1/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Technical data General Flammability rating according to UL 94 V0 Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels) Fuse G / 6,3 x 32 Fuse type Glass / ceramics / ... Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation max. 2.5 W (with single arrangement of the fuse terminal block in the event of overload) max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload) max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit) max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit) Connection in acc. with standard IEC60947-7-1 Maximum load current 32 A (Lower level) Nominal current IN 32 A Nominal voltage UN 400 V Connection in acc. with standard IEC60947-7-3 Maximum load current (upper level) 10 A Nominal current IN (upper level) 10 A Nominal voltage UN 400 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Relative insulation material temperature index (Elec., UL 746 B) 130 C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 09/28/2020Page2/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Technical data General Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 8.2 mm Length 86.5 mm Height NS 35/7,5 79 mm Height NS 35/15 86.5 mm Height NS 32 84 mm Ambient conditions Ambient temperature (operation) -60 C ... 85 C Ambient temperature (storage/transport) -25 C ... 55 C (For a short time, not exceeding 24 h, -60 to +70 C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C Ambient temperature (actuation) -5 C ... 70 C Connection data Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 4 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 4 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm Cross section with insertion bridge, solid max. 4 mm Cross section with insertion bridge, stranded max. 2.5 mm 2 conductors with same cross section, solid min. 0.2 mm 2 conductors with same cross section, solid max. 1.5 mm 2 conductors with same cross section, stranded min. 0.2 mm 2 conductors with same cross section, stranded max. 1.5 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm 09/28/2020Page3/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Technical data Connection data Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm Cross section with insertion bridge, solid max. 4 mm Cross section with insertion bridge, stranded max. 2.5 mm Connection method Screw connection Stripping length 8 mm Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC60947-7-1 IEC60947-7-3 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 09/28/2020Page4/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141116 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 eCl@ss 9.0 27141116 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 5.0 EC000899 ETIM 6.0 EC000899 ETIM 7.0 EC000899 09/28/2020Page5/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Classifications UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm/AWG/kcmil 28-10 28-10 UL Recognized 13631 http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 30 A 30 A 5A mm/AWG/kcmil 26-10 26-10 26-10 FILE E 60425 09/28/2020Page6/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Approvals cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 30 A 30 A 5A mm/AWG/kcmil 26-10 26-10 26-10 EAC FILE E 60425 RU CDE.A*30.B.01742 EAC RU CDE.BL08.B.00534 cULus Recognized Accessories Accessories DIN rail DIN rail perforated-NS 32 PERF 2000MM-1201002 DIN rail perforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 32 UNPERF 2000MM-1201015 DIN rail, unperforated, G profile, width:32 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver 09/28/2020Page7/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver 09/28/2020Page8/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver 09/28/2020Page9/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver 09/28/2020Page10/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray 09/28/2020Page11/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories End clamp-CLIPFIX 35-5-3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp-E/NS 35 N-0800886 End clamp, width: 9.5 mm, color: gray End clamp-E/UK-1201442 End clamp, width:9.5 mm, height:35.3 mm, material:PA, length:50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color:gray End clamp-E/UK 1-1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray Labeled terminal marker Zack marker strip-ZB 8 CUS-0825011 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10 09/28/2020Page12/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories Marker for terminal blocks-UC-TM 8 CUS-0824597 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56 Marker for terminal blocks-UCT-TM 8 CUS-0829616 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42 Zack marker strip-ZB 8,LGS:FORTL.ZAHLEN-1052015 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10 Zack marker strip-ZB 8,QR:FORTL.ZAHLEN-1052028 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 8,LGS:L1-N,PE-1052413 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10 09/28/2020Page13/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories Zack Marker strip, flat-ZBF 8 CUS-0825030 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10 Zack Marker strip, flat-ZBF 8,LGS:FORTL.ZAHLEN-0808804 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 101 ... 110, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TMF 8 CUS-0824654 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56 Marker for terminal blocks-UCT-TMF 8 CUS-0829672 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual labels: 42 Screw bridge Fixed bridge-FBRI 10-8 N-2772080 Fixed bridge, pitch: 8.2 mm, number of positions: 10, color: silver 09/28/2020Page14/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories Terminal marking Zack marker strip-ZB 8:UNBEDRUCKT-1052002 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 10.5 x 8.15 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 8-0818072 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 56 Marker for terminal blocks-UCT-TM 8-0828740 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 10.5 mm, Number of individual labels: 42 Zack Marker strip, flat-ZBF 8:UNBEDRUCKT-0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TMF 8-0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56 09/28/2020Page15/16 https://www.phoenixcontact.com/us/products/3007217 Fuse modular terminal block-UKK 5-HESI (6,3X32)-3007217 Accessories Marker for terminal blocks-UCT-TMF 8-0828748 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.4 x 4.7 mm, Number of individual labels: 42 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 09/28/2020Page16/16