H-MOSS(R) Controls Passive Infrared Wall Switches Features Designed for use on 120 or 277V AC circuits, no neutral required, fast retrofits. Built in photocell prevents lights from turning ON with sufficient natural light. 3-Way capable Matching wallplate included Ordering Information Description Manual adjusting; dual-voltage 120/277V; manual/auto ON operation UPC Number 783585256306 Catalog Number WS2000I Listings cULus listed to UL 773A Specifications Housing Lens Dimensions Mounting Height Mounting Strap Flame retardant UL 94 V-0 ABS Polyethylene Face 2.59"H x 1.30"W, 0.61"D (from wall out) 42 to 54 inches above floor Steel Performance Controls Ambient Light Service Switch Time Delay Electrical Load Capacity Environmental Operating Temperature Storage Sensing Indicators Passive Infrared Photocell, 10 to 500 foot candles OFF (service); vacancy (manual-ON); occupancy (auto-ON) Manual 20 seconds to 30 minutes Incandescent - 0 to 1000 watts, 120V; Ballast - 0 to 1000 watts, 277V; Horsepower rating 1/6 32F to 122F (0C to 50C) with rate of change not exceeding 20F(11C) per hour -40F to 150F (-40C to 65C); 20% to 90% non condensing relative humidity Red LED Dimensions in Inches (mm) Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 40 Waterview Drive * Shelton, CT 06484 Phone (800) 288-6000 * Fax (800) 255-1031 * Specifications subject to change without notice. Complementary Products SS Wallplate Snap-On Wallplate Online Resources Customer Use Drawing eCatalog Installation Instructions SS26 RCW1I