Solid State Relay G3NA A Wide Range of Models with 5- to 40-A Output Currents and Up to 480-VAC/ 200-VDC Output Voltages * All models feature the same compact dimensions to provide a uniform mounting pitch. For a lower profile option, see G5NE. * Built-in varistor effectively absorbs external surges. * Operation indicator (red LED) enables monitoring operation. * Protective cover for greater safety. * Ideal for commercial cooking, industrial/commercial heating, etc. * Standard models certified by UL/CSA and -UTU models by VDE (TUV). Ordering Information . Isolation Phototriac Zero cross function Yes Photocoupler Indicator Yes Rated output load (applicable output load) Rated input voltage 5 A at 24 to 240 VAC* (19 to 264 VAC) 5 to 24 VDC 10 A at 24 to 240 VAC* (19 to 264 VAC) 5 to 24 VDC Model G3NA-205B 100 to 120 VAC 200 to 240 VAC Phototriac Photocoupler G3NA-210B 100 to 120 VAC 200 to 240 VAC -- Phototriac Yes Photocoupler 10 A at 200 to 480 VAC* (180 to 528 VAC) 5 to 24 VDC 10 A at 5 to 200 VDC* (4 to 220 VDC) 5 to 24 VDC 20 A at 24 to 240 VAC* (19 to 264 VAC) 5 to 24 VDC G3NA-410B 100 to 240 VAC G3NA-D210B 100 to 240 VAC G3NA-220B 100 to 120 VAC 200 to 240 VAC Phototriac Photocoupler 20 A at 200 to 480 VAC* (180 to 528 VAC) 5 to 24 VDC 40 A at 24 to 240 VAC* (19 to 264 VAC) 5 to 24 VDC G3NA-420B 100 to 240 VAC G3NA-240B 100 to 120 VAC 200 to 240 VAC 40 A at 200 to 480 VAC* (180 to 528 VAC) 5 to 24 VDC 50 A at 200 to 480 VAC* (180 to 528 VAC) 5 to 24 VDC G3NA-440B 100 to 240 VAC G3NA-450B *Loss time increases under 75 VAC. Note: When ordering a TUV-approved model, add "-UTU" to the model number as shown below: Example: G3NA-210B-UTU. Solid State Relay G3NA 1 Accessories (Order Separately) Heat Sink Low-cost Models The following heat sinks are thin and can be DIN-track mounted (except Y92B-P250). See Dimensions for details. Model Applicable SSR Model Y92B-A100 Applicable SSR G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-220B, G3NA-410B, G3NA-420B Y92B-A150N G3NA-420B, G3NA-440B Y92B-N50 G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-410B, G3NE-205T(L), G3NE-210T(L) Y92B-A250 G3NA-440B Y92B-N100 G3NA-220B, G3NA-420B, G3NE-220T(L) Y92B-N150 G3NA-240B, G3NA-440B Mounting Bracket Y92B-P250 G3NA-450B Used to mount the G3NA with a mounting dimension of 56 mm. Model R99-11 Applicable SSR G3NA-420B, G3NA-440B See Dimensions for details. Specifications Input Ratings (Ambient temperature: 25C) Model Rated voltage G3NA-2@@B 5 to 24 VDC Operating voltage 4 to 32 VDC Impedance (See note 1) 7 mA max. (see note 2) Voltage level Must operate voltage Must release voltage 4 VDC max. 1 VDC min. 100 to 120 VAC 75 to 132 VAC 36 k 20% 75 VAC max. (see note 3) 20 VAC min. (see note 3) 200 to 240 VAC 150 to 264 VAC 72 k 20% 150 VAC max. (see note 3) 40 VAC min. (see note 3) G3NA-4@@B 5 to 24 VDC 4 to 32 VDC 5 mA max. (see note 2) 4 VDC max. 1 VDC min. G3NA-D210B 100 to 240 VAC 75 to 264 VAC 72 k 20% 75 VAC max. 20 VAC min. Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120 VAC, the input impedance is measured at 120 VAC). 2. With constant current input circuit system, the impedance for the G3NA-@@@B-UTU is 15 mA max. 3. Refer to the "Engineering Data" for further details. Output Ratings Model Applicable load Rated load voltage G3NA-205B 24 to 240 VAC Load voltage range 19 to 264 VAC G3NA-210B Load current With heat sink* 0.1 to 5 A 0.1 to 3 A 60 A (60 Hz, 1 cycle) 0.1 to 10 A 0.1 to 4 A 150 A (60 Hz, 1 cycle) G3NA-410B 200 to 480 VAC 180 to 528 VAC 0.2 to 10 A 0.2 to 4 A G3NA-220B 24 to 240 VAC 19 to 264 VAC 0.1 to 20 A 0.1 to 4 A G3NA-420B 200 to 480 VAC 180 to 528 VAC 0.2 to 20 A 0.2 to 4 A G3NA-240B 24 to 240 VAC 19 to 264 VAC 0.1 to 40 A 0.1 to 6 A G3NA-440B 200 to 480 VAC 180 to 528 VAC 0.2 to 40 A 0.2 to 6 A G3NA-450B 200 to 480 VAC 180 to 528 VAC 0.2 to 50 A 0.2 to 6 A G3NA-D210B 5 to 200 VDC 4 to 220 VDC 0.1 to 10 A 0.1 to 4 A *When the appropriate size OMRON heat sink is used. 2 Solid State Relay G3NA Inrush current Without heat sink 220 A (60 Hz, 1 cycle) 440 A (60 Hz, 1 cycle) 20 A (10 ms) Characteristics Item Operate time Release time G3NA-205B, -210B, -220B G3NA-240B G3NA-410B, -420B, -440B, -450B G3NA-D210B DC input 1/2 of load power source cycle + 1 ms max. 1 ms max. AC input 1 1/2 of load power source cycle + 1 ms max. 30 ms max. DC input 1/2 of load power source cycle + 1 ms max. 5 ms max. AC input 1 1/2 of load power source cycle + 1 ms max. 30 ms max. Output ON voltage drop 1.6 V (RMS) max. 1.8 V (RMS max.) 1.5 V max. Leakage current 5 mA max. (at 100 VAC) 1.6 V (RMS) max. 10 mA max. at 200 VAC 5 mA max. at 200 VDC 10 mA max. (at 200 VAC) 20 mA max. at 400 VAC Insulation resistance 100 M min (at 500 VDC) Dielectric strength 2,500 VAC, 50/60 Hz for 1 minute Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude Shock resistance Malfunction 1,000 m/s2 Ambient temperature Operating -30 to 80C (with no icing or condensation) Storage -30 to 100C (with no icing or condensation) Approved standards Ambient humidity UL508 File No. E64562/CSA C22.2 (No.0, No.14) File No. LR35535 (except for G3NA-450B) TUV R9151660 (EN60950) (except for G3NA-4@0B) Operating Weight 45% to 85% Approx. 60 g (2.1 oz.) Approx. 70 g (2.5 oz.) Approx. 80 g (2.8 oz.) Approx. 70 g (2.5 oz.) Note: Data shown are of initial value. Solid State Relay G3NA 3 Engineering Data Load Current vs. Ambient Temperature Characteristics G3NA-210B/410B G3NA-205B G3NA-220B/420B Without heat sink Load current (A) With standard heat sink (Y92B-A100 or Y92BN50) or aluminum plate measuring 75 mm x 75 mm x 13.2 mm (W x H x D) Load current (A) Load current (A) 20 16 10 8 6 5 4 With standard heat sink (Y92B-A100 or Y92B-N50) or aluminum plate measuring 150 mm x 150 mm x 13.2 mm (W x H x D) With iron plate measuring 100 x 100 x 0.8 (W x H x D) With standard heat sink (Y92B-A100 or Y92B-N100) or aluminum plate measuring 200 mm x 200 mm x 13.2 mm (W x H x D) With iron plate measuring 100 x 100 x 0.8 (W x H x D) Without heat sink 2 Without heat sink 0 Ambient temperature (C) Ambient temperature (C) Ambient temperature (C) G3NA-240B G3NA-440B G3NA-D210B 50 With iron plate measuring 100 x 100 x 0.8 (W x H x D) Load current (A) Load current (A) 40 Without heat sink Ambient temperature (C) G3NA-450B Load current (A) With standard heat sink (Y92B-P250) Without heat sink Ambient temperature (C) 4 Solid State Relay G3NA 30 With standard heat sink (Y92B-A150N or Y92B-N150) 20 12 10 6 4 2 0 With iron plate measuring 100 x 100 x 0.8 (W x H x D) Without heat sink 10 Load current (A) 45 With standard heat sink (Y92B-A150N or Y92B-N150) 20 With Y92BA250 or heat sink with a radiation efficiency of 1C/W. With standard heat sink (Y92B-A100 or Y92B-N50) or aluminum plate measuring 150 mm x 150 mm x 13.2 mm (W x H x D) 6 5 4 With iron plate measuring 100 x 100 x 0.8 (W x H x D) Without heat sink 2 0 Ambient temperature (C) Ambient temperature (C) Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3NA-205B G3NA-220B/420B Inrush current (A. Peak) Inrush current (A. Peak) Inrush current (A. Peak) G3NA-210B/410B Energizing time (ms) Energizing time (ms) Energizing time (ms) Temperature Characteristics (with Must Operate Voltage and Must Release Voltage) G3NA-2@@B AC Input Energizing time (ms) Variation rate (%) Inrush current (A. Peak) G3NA-D210B Inrush current (A. Peak) G3NA-240B/440B/450B Energizing time (ms) Ambient temperature (C) Heat Sink Size vs. Load Current G3NA-220B Ambient temperature 40C Heat sink size (cm2 ) Ambient temperature 80C Note: The heat sink size refers to the combined area of the sides of the heat sink that radiate heat. For example, when a current of 18 A is allowed to flow through the SSR at 40 C, the graph shows that the heat sink size is about 450 cm2. Therefore, if the heat sink is square, one side of the heat sink must be 15 cm (152 x 2 = 450) or longer. Aluminum plate 3.2 mm thick Load current (A) Solid State Relay G3NA 5 Dimensions Note: All units are in millimeters unless otherwise indicated. In the case of surface mounting, a 30% derating of the load current is required. The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. G3NA-205B, G3NA-210B, G3NA-220B, G3NA-410B, G3NA-420B 11.9 Four, M4 x 8 4.5 dia. screws Mounting Holes Two, 4.3-dia. or M4 holes Terminal Arrangement/ Internal Connections (Top View) Load Load power supply 58 max. 47.5 44 Load 1 2 (-) 4 (+) 3 47.60.2 4.5 25 43 max. Operating indicator 13.8 25 max. 27 max. Input G3NA-240B, G3NA-440B, G3NA-450B 11.9 4.5 dia. Two, M5 x 12 screws Mounting Holes Two, 4.3-dia. or M4 holes Terminal Arrangement/ Internal Connections (Top View) Load Load power supply 58 min. 47.5 44 Load 47.60.2 Operating indicator 4.5 25 43 max. Two, M4x8 13.8 25 max. 27 max. 1 2 (-) 4 (+) 3 Input G3NA-D210B Note: The load can be connected to either the positive or negative side. 11.9 Four, M4 x 8 4.5 dia. screws Mounting Holes Terminal Arrangement/ Internal Connections (Top View) Two, 4.3-dia. or M4 holes Load 58 max. 47.5 44 Load 47.60.2 4.5 25 43 max. 6 Load power supply Solid State Relay G3NA Operating indicator 13.8 25 max. 27 max. 1 - 2 + (-) 4 (+) 3 Input Heat Sink Y92B-N50 Mounting Holes Two, 4.4-dia. or M4 holes Two, M3 holes Two, 3.2-dia. holes Two, M4 holes 4.6 dia. 44 max. 30 35 30.50.3 47.6 5.6 5 77 max. 900.3 100 max. 47 max. 900.4 4.5 6 51 max. 350.2 Weight: approx. 200 g Y92B-N100 4.6 dia. Two, M3 holes Two, M4 holes Mounting Holes Two, 3.2-dia. holes Two, 4.4-dia. or M4 holes 71 max. 30 35 30.50.3 75 max. 900.4 5.6 47.6 77 max. 900.3 28 5 100 max. 13 4.5 100 max. 350.2 Weight: approx. 400 g Y92B-N150 35 100 max. 30 560.3 77 max. 900.3 100 max. 28 R2.2 5 100 max. 4.5 13 Weight: approx. 560 g Y92B-A250 Three, M4 holes 47.6 900.1 900.1 900.1 5.6 104 max. Y92B-A150N Three, M4 holes Two, M4 holes Two, 4.4-dia. or M4 holes Three, M4 holes 4.6 dia. Y92B-A100 Mounting Holes Two, 3.2-dia. holes 47.6 R2.2 80.5 max. 1.5 47.6 102 max. 9.6 2 47.6 500.1 100 max. 500.1 560.5 150 max. 500.1 560.5 250 max. 30 45.5 max. Solid State Relay 1.5 G3NA 7 Mounting Holes Y92B-A100 Y92B-A150 Y92B-A250 Mounting Holes Four, 4.5 dia. or M4 Four, M4 Four, 4.3-dia. or M4 holes 190.5 max. 90+0.1 50+0.1 Four, R2.5 130.5 max. 70 max. Y92B-P250 Four, M4 Mounting Holes Four, 4.5 dia. or M4 190.5 max. Four, R2.5 130.5 max. 70 max. R99-11 16 8 5 12.5 56 21 4 8 Solid State Relay G3NA 4.6 Use Mounting Bracket R99-11 so that the G3NA-240B can be mounted with the same pitch as that of the G3N-240B. Precautions Refer to pages 11 to 19 for general precautions. Load Connection For an AC load, use a power supply rated at 50 or 60 Hz. The maximum operating frequency is 10 Hz. The G3NA has a built-in varistor for overvoltage protection. Zero Cross Function An SSR with a zero cross function operates when an AC load voltage reaches the zero point or its vicinity. This reduces clicking noises when the load is input, and minimizes the influence of an inductive load, such as a lamp, heater, or motor, on the power supply because the inrush current of the load is reduced. This can also minimize the scale of the inrush current protection circuit. Output (load voltage) Input EN55011 Measurement of Mains Terminal Disturbance Voltage The G3NA-UTU conforms to EN55011 standards when a capacitor is connected to the load power supply as shown in the following circuit diagram. Load Input G3NA-UTU Output Recommended Capacitor: Nissei Denki's MKT-series R40 (1 F) The output terminal side of the G3NA-D210B is connected to a builtin diode for protecting the SSR from damage that may result from reverse connection. The SSR, however, cannot withstand one minute or more if the wires are connected in reverse order. Therefore, pay the utmost attention not to make polarity mistakes on the load side. ON OFF At a low applied voltage, such as 24 VAC, the load current is not fully supplied. When the Unit is switched ON, the voltage required to power the Unit deprives the output signal of the necessary voltage level and thus creates loss time. The lower the load voltage is, the greater the loss time is. This condition, however, will not create any serious problems. Loss time For a DC or L load, a diode should be connected in parallel the load to absorb the counter electromotive force of the load. Load Input SSR Load power supply When attaching a heat sink to the G3NA, apply Silicone Grease or equivalent heat conductive grease on the heat sink. (Toshiba Silicon, Shinetsu Silicon, etc.) Tighten the mounting screws of the heat sink with a torque of 0.78 to 0.98 N*m. Solid State Relay G3NA 9 Omron Electronic Components, LLC Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. 10 Solid State Relay G3NA (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses ( including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and description may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c)disclosure to non-citizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Solid State Relay G3NA 11 Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. J01C-E-01 12 01/07 Solid State Relay G3NA Specifications subject to change without notice Printed in USA