G3NA-220B-UTU - Omron Electronic Components LLC

Solid State Relay G3NA 1

Solid State Relay

G3NA

A Wide Range of Models with 5- to 40-A

Output Currents and Up to 480-VAC/

200-VDC Output Voltages

• All models feature the same compact dimensions to provide

a uniform mounting pitch. For a lower profile option, see

G5NE.

• Built-in varistor effectively absorbs external surges.

• Operation indicator (red LED) enables monitoring opera-

tion.

• Protective cover for greater safety.

• Ideal for commercial cooking, industrial/commercial heat-

ing, etc.

• Standard models certified by UL/CSA and -UTU models by

VDE (TÜV).

Ordering Information

*Loss time increases under 75 VAC.

Note: When ordering a TÜV-approved model, add “-UTU” to the model number as shown below:

Example: G3NA-210B-UTU.

Isolation Zero cross

function

Indicator Rated output load

(applicable output load)

Rated input voltage Model

Phototriac Yes Yes 5 A at 24 to 240 VAC*

(19 to 264 VAC)

5 to 24 VDC G3NA-205B

Photocoupler 100 to 120 VAC

200 to 240 VAC

Phototriac 10 A at 24 to 240 VAC*

(19 to 264 VAC)

5 to 24 VDC G3NA-210B

Photocoupler 100 to 120 VAC

200 to 240 VAC

10 A at 200 to 480 VAC*

(180 to 528 VAC)

5 to 24 VDC G3NA-410B

100 to 240 VAC

— 10 A at 5 to 200 VDC*

(4 to 220 VDC)

5 to 24 VDC G3NA-D210B

100 to 240 VAC

Phototriac Yes 20 A at 24 to 240 VAC*

(19 to 264 VAC)

5 to 24 VDC G3NA-220B

Photocoupler 100 to 120 VAC

200 to 240 VAC

20 A at 200 to 480 VAC*

(180 to 528 VAC)

5 to 24 VDC G3NA-420B

100 to 240 VAC

Phototriac 40 A at 24 to 240 VAC*

(19 to 264 VAC)

5 to 24 VDC G3NA-240B

Photocoupler 100 to 120 VAC

200 to 240 VAC

40 A at 200 to 480 VAC*

(180 to 528 VAC)

5 to 24 VDC G3NA-440B

100 to 240 VAC

50 A at 200 to 480 VAC*

(180 to 528 VAC)

5 to 24 VDC G3NA-450B

2Solid State Relay G3NA

■Accessories (Order Separately)

Heat Sink

The following heat sinks are thin and can be DIN-track mounted

(except Y92B-P250).

See Dimensions for details.

Low-cost Models

Mounting Bracket

Used to mount the G3NA with a mounting dimension of 56 mm.

See Dimensions for details.

Specifications

■Input Ratings

(Ambient temperature: 25°C)

Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120

VAC, the input impedance is measured at 120 VAC).

2. With constant current input circuit system, the impedance for the G3NA-@@@B-UTU is 15 mA max.

3. Refer to the “Engineering Data” for further details.

■Output Ratings

*When the appropriate size OMRON heat sink is used.

Model Applicable SSR

Y92B-N50 G3NA-205B, G3NA-210B, G3NA-D210B,

G3NA-410B, G3NE-205T(L), G3NE-210T(L)

Y92B-N100 G3NA-220B, G3NA-420B, G3NE-220T(L)

Y92B-N150 G3NA-240B, G3NA-440B

Y92B-P250 G3NA-450B

Model Applicable SSR

Y92B-A100 G3NA-205B, G3NA-210B, G3NA-D210B,

G3NA-220B, G3NA-410B, G3NA-420B

Y92B-A150N G3NA-420B, G3NA-440B

Y92B-A250 G3NA-440B

Model Applicable SSR

R99-11 G3NA-420B, G3NA-440B

Model Rated

voltage

Operating

voltage

Impedance

(See note 1)

Voltage level

Must operate voltage Must release voltage

G3NA-2@@B 5 to 24 VDC 4 to 32 VDC 7 mA max. (see note 2) 4 VDC max. 1 VDC min.

100 to 120 VAC 75 to 132 VAC 36 kΩ ±20% 75 VAC max. (see note 3) 20 VAC min. (see note 3)

200 to 240 VAC 150 to 264 VAC 72 kΩ ±20% 150 VAC max. (see note 3) 40 VAC min. (see note 3)

G3NA-4@@B 5 to 24 VDC 4 to 32 VDC 5 mA max. (see note 2) 4 VDC max. 1 VDC min.

G3NA-D210B 100 to 240 VAC 75 to 264 VAC 72 kΩ ±20% 75 VAC max. 20 VAC min.

Model Applicable load

Rated

load voltage

Load

voltage range

Load current Inrush current

With heat sink* Without heat sink

G3NA-205B 24 to 240 VAC 19 to 264 VAC 0.1 to 5 A 0.1 to 3 A 60 A (60 Hz, 1 cycle)

G3NA-210B 0.1 to 10 A 0.1 to 4 A 150 A (60 Hz, 1 cycle)

G3NA-410B 200 to 480 VAC 180 to 528 VAC 0.2 to 10 A 0.2 to 4 A

G3NA-220B 24 to 240 VAC 19 to 264 VAC 0.1 to 20 A 0.1 to 4 A 220 A (60 Hz, 1 cycle)

G3NA-420B 200 to 480 VAC 180 to 528 VAC 0.2 to 20 A 0.2 to 4 A

G3NA-240B 24 to 240 VAC 19 to 264 VAC 0.1 to 40 A 0.1 to 6 A 440 A (60 Hz, 1 cycle)

G3NA-440B 200 to 480 VAC 180 to 528 VAC 0.2 to 40 A 0.2 to 6 A

G3NA-450B 200 to 480 VAC 180 to 528 VAC 0.2 to 50 A 0.2 to 6 A

G3NA-D210B 5 to 200 VDC 4 to 220 VDC 0.1 to 10 A 0.1 to 4 A 20 A (10 ms)

Solid State Relay G3NA 3

■Characteristics

Note: Data shown are of initial value.

Item G3NA-205B, -210B,

-220B

G3NA-240B G3NA-410B, -420B,

-440B, -450B

G3NA-D210B

Operate time DC input 1/2 of load power source cycle + 1 ms max. 1 ms max.

AC input 1 1/2 of load power source cycle + 1 ms max. 30 ms max.

Release time DC input 1/2 of load power source cycle + 1 ms max. 5 ms max.

AC input 1 1/2 of load power source cycle + 1 ms max. 30 ms max.

Output ON voltage drop 1.6 V (RMS) max. 1.6 V (RMS) max. 1.8 V (RMS max.) 1.5 V max.

Leakage current 5 mA max. (at 100 VAC) 10 mA max. at 200 VAC 5 mA max. at 200 VDC

10 mA max. (at 200 VAC) 20 mA max. at 400 VAC

Insulation resistance 100 MΩ min (at 500 VDC)

Dielectric strength 2,500 VAC, 50/60 Hz for 1 minute

Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude

Shock resistance Malfunction 1,000 m/s2

Ambient

temperature

Operating -30° to 80°C (with no icing or condensation)

Storage -30° to 100°C (with no icing or condensation)

Approved standards UL508 File No. E64562/CSA C22.2 (No.0, No.14) File No. LR35535 (except for G3NA-450B)

TÜV R9151660 (EN60950) (except for G3NA-4@0B)

Ambient humidity Operating 45% to 85%

Weight Approx. 60 g (2.1 oz.) Approx. 70 g (2.5 oz.) Approx. 80 g (2.8 oz.) Approx. 70 g (2.5 oz.)

4Solid State Relay G3NA

Engineering Data

Load Current vs. Ambient Temperature Characteristics

G3NA-205B G3NA-210B/410B G3NA-220B/420B

Ambient

temperature (

°C)

Ambient temperature (

°C)

Ambient temperature (

°C)

Load current (A)

With

standard heat sink

(Y92B-A100 or Y92B-

N50) or aluminum plate

measuring 75 mm x 75

mm x 13.2 mm

(W x H x D)

Without heat sink

With standard heat sink

(Y92B-A100 or Y92B-N50)

or aluminum plate measur

ing 150 mm x 150 mm x

13.2 mm

(W x H x D)

With iron plate measuring

100 x 100 x 0.8 (W x H x D)

Without heat sink

With standard heat

sink (Y92B-A100 or

Y92B-N100) or alumi-

num plate measuring

200 mm x 200 mm x

13.2 mm (W x H x D)

With iron plate measuring

100 x 100 x 0.8 (W x H x D)

Without heat sink

G3NA-240B G3NA-440B G3NA-D210B

Load current (A)

Ambient

temperature (

°C)

Load current (A)

Ambient temperature (

°C)

Load current (A)

Ambient temperature (

°C)

With

standard heat

sink (Y92B-A150N

or Y92B-N150)

With iron plate measuring

100 x 100 x 0.8 (W x H x D)

Without heat sink

With Y92B-

A250 or heat

sink with a ra

diation ef

ficien-

cy of 1

°C/W.

With standard heat

sink (Y92B-A150N or

Y92B-N150)

With iron plate measuring

100 x 100 x 0.8 (W x H x D)

Without heat sink

With standard heat sink

(Y92B-A100 or Y92B-N50)

or aluminum plate measur

ing 150 mm x 150 mm x

13.2 mm (W x H x D)

With iron plate measuring

100 x 100 x 0.8 (W x H x D)

Without heat sink

G3NA-450B

Load current (A)

Ambient

temperature (

°C)

With standard heat sink

(Y92B-P250)

Without heat sink

Solid State Relay G3NA 5

Inrush Current Resistivity

Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)

Heat Sink Size vs. Load Current

G3NA-205B G3NA-210B/410B G3NA-220B/420B

Inrush current (A. Peak)

Ener

izin

time (ms)

Inrush current (A. Peak)

Ener

izin

time (ms)

Inrush current (A. Peak)

Ener

izin

time (ms)

Ambient temperature (

°C)

G3NA-240B/440B/450B G3NA-D210B

Temperature Characteristics

(with Must Operate Voltage

and Must Release Voltage)

G3NA-2@@B AC Input

Inrush current (A. Peak)

Energizing time (ms)

Inrush current (A. Peak)

Energizing time (ms)

ariation rate (%)

G3NA-220B

Heat sink size (cm )

Ambient temperature

80°CAmbient temperature

40°C

Aluminum plate

3.2 mm thick

Load current (A)

Note: The heat sink size refers to the combined area of the sides of the heat

sink that radiate heat. For example, when a current of 18 A is allowed to

flow through the SSR at 40°C, the graph shows that the heat sink size is

about 450 cm2. Therefore, if the heat sink is square, one side of the heat

sink must be 15 cm (152 x 2 = 450) or longer.

6Solid State Relay G3NA

Dimensions

Note: All units are in millimeters unless otherwise indicated.

In the case of surface mounting, a 30% derating of the load current is required.

The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting

hole dimensions.

G3NA-205B, G3NA-210B, G3NA-220B, G3NA-410B, G3NA-420B

13.8

(−) (+)

4.5

47.5 44

47.6±0.2

25 max.

27 max.

Mounting Holes

Load

Input

Load

4.5 dia.

43 max.

58 max.

Operating

indicator

Four, M4 x 8

screws

Two, 4.3-dia.

or M4 holes

Terminal Arrangement/

Internal Connections

(Top View)

Load

power

supply

11.9

47.6±0.2 12

(−) (+)

G3NA-240B, G3NA-440B, G3NA-450B

13.8

47.5 44

4.5

11.9 Mounting Holes

Load

Input

Load

25 max.

27 max.

58 min.

4.5 dia. Two, M5 x 12 screws

43 max.

Two,

M 4 x 8

Operating

indicator

Two, 4.3-dia.

or M4 holes Load

power

supply

Terminal Arrangement/

Internal Connections

(Top View)

G3NA-D210B

13.8

47.6±0.2 12

(−) (+)

−+

4.5

47.5 44

Note: The load can be connected to either the positive or negative side.

11.9

25 max.

27 max.

Mounting Holes

Load

Input

Load

4.5 dia.

43 max.

58 max.

Four, M4 x 8

screws

Operating

indicator

Two, 4.3-dia.

or M4 holes

Terminal Arrangement/

Internal Connections

(Top View)

Load

power

supply

Solid State Relay G3NA 7

Heat Sink

5.6

47.6

90±0.3

35 30.5±0.3 30

54.5

35±0.2

90±0.4

Mounting Holes

4.6 dia. Two, M3 holes

Two, M4 holes

77 max.

100 max.

44 max. 47 max.

51 max.

Weight: approx. 200 g

Two, 3.2-dia. holes Two, 4.4-dia.

or M4 holes

Y92B-N50

Y92B-N100

3530.5±0.3

47.6

90±0.3

5.6 54.5

28 13

35±0.2

90±0.4

4.6 dia. Two, M3 holes

77 max.

100 max.

71 max.

100 max.

75 max.

Two, 3.2-dia. holes Mounting Holes

Weight: approx. 400 g

Two, M4

holes Two, 4.4-dia.

or M4 holes

Y92B-N150

47.6

5.6 5 4.5

90±0.3

56±0.3 13

4.6 dia.

77 max.

100 max.

Two, 3.2-dia. holes

104 max.

Mounting Holes

Weight: approx. 560 g

Two, 4.4-dia.

or M4 holes

Three,

M4 holes

47.6

50±0.1

47.6

50±0.1

56±0.5

R2.2 R2.2 47.6

50±0.1

56±0.5

1.5

9.6

1.5

90±0.1

Y92B-A100 Y92B-A150N Y92B-A250

Two, M4 holes

100 max.

Three, M4 holes

150 max.

Three, M4 holes

250 max.

80.5 max.

45.5 max.

102 max.

8Solid State Relay G3NA

Mounting Holes

Y92B-A100

Y92B-A150

Y92B-A250

90+0.1

50+0.1

Four, 4.3-dia. or M4 holes

70 max.

Four

, M4

Four, R2.5

130.5 max.

190.5 max.

Mounting

Holes

Four, 4.5 dia. or M4

Y92B-P250

70 max.

Four, M4

Four, R2.5

130.5 max.

190.5 max.

Mounting Holes

Four, 4.5 dia. or M4

R99-11

4.6

21 12.5

Use Mounting Bracket R99-11 so that the

G3NA-240B can be mounted with the same

pitch as that of the G3N-240B.

Solid State Relay G3NA 9

Precautions

Refer to pages 11 to 19 for general precautions.

■Load Connection

For an AC load, use a power supply rated at 50 or 60 Hz.

The maximum operating frequency is 10 Hz.

The G3NA has a built-in varistor for overvoltage protection.

■Zero Cross Function

An SSR with a zero cross function operates when an AC load volt-

age reaches the zero point or its vicinity. This reduces clicking noises

when the load is input, and minimizes the influence of an inductive

load, such as a lamp, heater, or motor, on the power supply because

the inrush current of the load is reduced. This can also minimize the

scale of the inrush current protection circuit.

At a low applied voltage, such as 24 VAC, the load current is not fully

supplied. When the Unit is switched ON, the voltage required to

power the Unit deprives the output signal of the necessary voltage

level and thus creates loss time. The lower the load voltage is, the

greater the loss time is. This condition, however, will not create any

serious problems.

For a DC or L load, a diode should be connected in parallel the load

to absorb the counter electromotive force of the load.

When attaching a heat sink to the G3NA, apply Silicone Grease or

equivalent heat conductive grease on the heat sink. (Toshiba Silicon,

Shinetsu Silicon, etc.)

Tighten the mounting screws of the heat sink with a torque of 0.78 to

0.98 N•m.

EN55011 Measurement of Mains

Terminal Disturbance Voltage

The G3NA-UTU conforms to EN55011 standards when a capacitor is

connected to the load power supply as shown in the following circuit

diagram.

Recommended Capacitor:

Nissei Denki’s MKT-series R40 (1 µF)

The output terminal side of the G3NA-D210B is connected to a built-

in diode for protecting the SSR from damage that may result from

reverse connection. The SSR, however, cannot withstand one min-

ute or more if the wires are connected in reverse order. Therefore,

pay the utmost attention not to make polarity mistakes on the load

side.

Output (load voltage)

Input ON

OFF

Loss time

SSR

Input

Load Load power

supply

G3NA-UTU Output

Load

Input

10 Solid State Relay G3NA

Omron Electronic Components, LLC

Terms and Conditions of Sales

1. Definitions: The words used herein are defined as follows.

(a) Terms: These terms and conditions

(b) Seller: Omron Electronic Components LLC and its subsidiaries

(d) Products: Products and/or services of Seller

(e) Including: Including without limitation

2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,

invoices, purchase orders and other documents, whether electronic or in writing, relating

to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's

purchase order or other documents which are inconsistent with, or in addition to, these

Te r m s .

3. Distributor: Any distributor shall inform its customer of the contents after and including

section III of these Terms.

1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.

Buyer agrees to pay the price in effect at time of shipment. Payments for Products

received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no

right to set off any amounts against the amount owing in respect of this invoice.

2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to

Buyer after deducting transportation charges, taxes and duties, and will be allowed only

if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past

due amounts owing to Seller.

3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum

legal rate, whichever is less, on any balance not paid within the stated terms.

4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.

5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer

shall make remittance to Seller at the then current exchange rate most favorable to

Seller; provided that if remittance is not made when due, Buyer will convert the amount

to U.S. dollars at the then current exchange rate most favorable to Seller available

during the period between the due date and the date remittance is actually made.

6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining

any government approvals regarding the importation or sale of the Products.

7. Taxes: All taxes, duties and other governmental charges (other than general real property

and income taxes), including any interest or penalties thereon, imposed directly or

indirectly on Seller or required to be collected directly or indirectly by Seller for the

manufacture, production, sale, delivery, importation, consumption or use of the Products

sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall

be charged to and remitted by Buyer to Seller.

8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,

Seller reserves the right to stop shipments or require satisfactory security or payment in

advance. If Buyer fails to make payment or otherwise comply with these Terms or any

related agreement, Seller may (without liability and in addition to other remedies) cancel any

unshipped portion of Products sold hereunder and stop any Products in transit until

Buyer pays all amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer

indemnifies Seller fully against all costs or expenses arising in connection therewith.

10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from

causes beyond its control, including earthquakes, fires, floods, strikes or other labor

disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,

delay in or lack of transportation or the requirements of any government authority.

11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:

(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise

stated in writing by Seller), at which point title to and all risk of loss of the Products shall

pass from Seller to Buyer, provided that Seller shall retain a security interest in the

Products until the full purchase price is paid by Buyer;

(b) Delivery and shipping dates are estimates only; and

handling and extra charges apply to special conditions.

12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products

occurring before delivery to the carrier must be presented in detail in writing to Seller

within 30 days of receipt of shipment.

1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY

OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE

APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING

APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE

BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC

COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)

SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.

Buyer acknowledges that it alone has determined that the Products will meet their

requirements of the intended use in all cases. Buyer must know and observe all

prohibitions of use applicable to the Product/s.

2. Use with Attention: The followings are some examples of applications for which

particular attention must be given. This is not intended to be an exhaustive list of all

possible use of any Product, nor to imply that any use listed may be suitable for any

Product:

(a) Outdoor use, use involving potential chemical contamination or electrical

interference.

(b) Use in consumer Products or any use in significant quantities.

medical equipment, amusement machines, vehicles, safety equipment, and

installations subject to separate industry or government regulations.

(d) Systems, machines, and equipment that could present a risk to life or property.

3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING

SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE

PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE

WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED

VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY

SELLER.

5. Programmable Products: Seller shall not be responsible for the Buyer's programming of

a programmable Product.

1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in

materials and workmanship for a period of twelve months from the date of sale by Seller

(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY

OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OF THE PRODUCTS.

2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form

originally shipped with Buyer responsible for labor charges for removal or replacement

thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an

amount equal to the purchase price of the Product; provided that there shall be no

liability for Seller or its affiliates unless Seller's analysis confirms that the Products were

handled, stored, installed and maintained and not subject to contamination, abuse,

misuse or inappropriate modification. Return of any Products by Buyer must be

approved in writing by Seller before shipment.

3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED

WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL

LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF

THE PRODUCT ON WHICH LIABILITY IS ASSERTED.

4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its

employees from and against all liabilities, losses, claims, costs and expenses (including

attorney's fees and expenses) related to any claim, investigation, litigation or proceeding

(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or

omissions under these Terms or in any way with respect to the Products.

1. Intellectual Property: The intellectual property embodied in the Products is the exclusive

property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way

without the written permission of Seller. Buyer (at its own expense) shall indemnify and

hold harmless Seller and defend or settle any action brought against Seller to the extent

that it is based on a claim that any Product made to Buyer specifications infringed

intellectual property rights of another party.

2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or

tooling, all engineering and tooling shall remain the exclusive property of Seller. All

information and materials supplied by Seller to Buyer relating to the Products are

confidential and proprietary, and Buyer shall limit distribution thereof to its trusted

employees and strictly prevent disclosure to any third party.

3. Performance Data: Performance data is provided as a guide in determining suitability

and does not constitute a warranty. It may represent the result of Seller's test conditions,

and the users must correlate it to actual application requirements.

4. Change In Specifications: Product specifications and description may be changed at any

time based on improvements or other reasons. It is Seller’s practice to change part

numbers when published ratings or features are changed, or when significant

engineering changes are made. However, some specifications of the Product may be

changed without any notice.

5. Errors And Omissions: The information on Seller’s website or in other documentation

has been carefully checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses

regarding (a) export of the Products or information provided by Seller; (b) sale of

Products to forbidden or other proscribed persons or organizations; (c)disclosure to

non-citizens of regulated technology or information.

1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing

between Buyer and Seller shall operate as a waiver of rights by Seller.

2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.

3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal

and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.

4. Amendment: These Terms constitute the entire agreement between Buyer and Seller

relating to the Products, and no provision may be changed or waived unless in writing

signed by the parties.

5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall

not invalidate any other provision.

I. GENERAL

II. SALES

III. PRECAUTIONS

IV. WARRANTY AND LIMITATION

V. INFORMATION; ETC.

VI. MISCELLANEOUS

Solid State Relay G3NA 11

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan-

dards, codes or regulations which apply to the combination of the Product in

Buyer's application or use of the Product. At Buyer's request, Seller will pro-

vide applicable third party certification documents identifying ratings and limi-

tations of use which apply to the Product. This information by itself is not

sufficient for a complete determination of the suitability of the Product in com-

bination with the end product, machine, system, or other application or use.

Buyer shall be solely responsible for determining appropriateness of the par-

ticular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

(iii) Use in consumer products or any use in significant quantities.

(iv) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to this

product.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's

programming of a programmable product, or any consequence thereof.

3. Performance Data. Performance data given in this publication is provided as

a guide for the user in determining suitability and does not constitute a war-

ranty. It may represent the result of Seller's test conditions, and the users must

correlate it to actual application requirements. Actual performance is subject to

Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may be

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications fo

your application. Please consult with your Seller representative at any time to

confirm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefully

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance. Where indicated, our products currently comply, to the

best of our knowledge as of the date of this publication, with the requirements

of the European Union's Directive on the Restriction of certain Hazardous

Substances ("RoHS"), although the requirements of RoHS do not take effect

until July 2006. These requirements may be subject to change. Please consult

our website for current information.

12 Solid State Relay G3NA

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Cat. No. J01C-E-01 Printed in USA

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

01/07 Specifications subject to change without notice

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.