3MTM Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5x1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series * Mates with Hard Metric/Compact PCI(R) IEC 61076-4-101 backplane connectors, UHM headers, HSHM headers * Hard Metric 2 mm x 2 mm grid spacing * Fully-shielded coaxial or twin axial interface * Standard or custom wafer stacks * Range of high performance cable - 50 , 75 coax, 85 , 100 twin axial * Power wafer * Semi-rigid stacking system reduces insertion force * Mix-and-match custom options Date Modified: October 15, 2010 TS-2364-A Sheet 1 of 5 Physical Connector/Insulation Material: LCP Flammability: UL 94V-0 Connector Contact Material: Copper alloy Plating: Underplating: 100 " (2.54 m) Avg. Nickel Contact Interface: [30 ] Gold minimum wipe area Ground Shield Contact: Underplating: 100 " (2.54 m) Avg. Nickel overall Overplating: 10 " (0.25 m) Avg. Gold Electrical Cable Voltage Rating: 30 V Cable Current Rating: 1 A min. (Rating is application dependent) Cable Insulation Resistance: >100 Megohms at 500 VDC Cable Withstanding Voltage: 500 VDC for 1 minute Cable Characteristic Impedance: 50 and 75 single ended assemblies, 85 and 100 differential assemblies Environmental Cable Temperature Rating: -20 to +80C Minimum UL File No.: E86982 Mechanical Cable Connector Insertion Force: 0.3 N [1.35 pounds]/Single wafer max Cable Connector Withdrawal Force: 0.11 N [0.50 pounds]/Single wafer max Cable Retention Force: 44.5 N [10 pounds] minimum Cable Connector Durability: 50 Mating Cycles 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5x1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series Shielded Controlled Impedance (SCI) Wafer Receptacle mm [Inch] Tolerance Unless Noted mm .0 .00 .3 .15 .000 [ ] Dimensions for Reference Only Assembly Tolerance <36" 0.5" 36" to 120" 1.0" Minimum Assembly Length = 4 inches If all 25 positions are needed, end cap extends 2 mm over position one end. Space headers at 2 mm gap. Ordering Information 98XXXX-XXX-XXX.X-X-X-XX Right and Left Connectors: abcde 12 = 1 Coax GSGXX 13 = 1 Coax XXGSG 15 = 2 Coax GSGSG 17 = 2 Twin Axial S S G S S 19 = 1 Twin Axial S S G X X 20 = 1 Twin Axial X X G S S XX = Custom, contact 3M Coax Cable Type: 027 = 50 Cable, 26 AWG 105 = 50 Cable, 28 AWG 054 = 75 Cable, 30 AWG Twin Axial Cable Type: 058 = 100 Twin Axial, 26 AWG 122 = 85 Twin Axial, 25 AWG Length: Tip-to-tip in inches Cable Configuration: C = Pin A to Pin A (Ref Figure A) D = Transmit to Receive (Ref Figure B) Number of Wafer Assemblies in Harness: 1 through 26 Ground Pattern: 1 = Ground to C Row TS-2364-A Sheet 2 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5x1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series Cable Configuration Figure A Figure B (PIN 1 to PIN 1) Twin Axial shown (Transmit to Recieve) Twin Axial S1 S1 S2 S2 G3 G3 S4 S4 S5 S5 S1 S1 S2 S2 G3 G3 S4 S4 S5 S5 S = Signal / G = Ground / NC = Not Connected Figure A2 Figure B2 Coax (Transmit to Recieve) Coax G1 G1 S2 S2 G3 G3 S4 S4 G5 G5 G1 G5 S2 S4 G3 G3 S4 S2 G5 G1 UHM Cable Assemblies (Standard Assemblies) Socket Style Order Number (Add Cable Length) UHM B110 981717-058-XXX.X-C-1-22 UHM C055 981717-058-XXX.X-C-1-11 UHM B095 981717-058-XXX.X-C-1-19 UHM A110 981717-058-XXX.X-C-1-11 UHM B125 981717-058-XXX.X-C-1-25 # Assemb. (2) TS-2364-A Sheet 3 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5x1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series Twin Axial Cable A (2 Places) B C D C (Double Shielded) D A B Physical Properties (Typical) Cable Type Dielectric Material Shield Jacket 058 Twin Axial 100 26 AWG, Solid Silver Plated Copper 0.455 mm [0.018] Air & PTFE Dual layer braid FEP Brown 1.55 x 2.49 mm O.D. [.061" x .098" O.D.] 122 Twin Axial 85 5 24.5 AWG, Solid SPC 0.483 mm [0.019] Air & PTFE Braid FEP Burgundy 1.73 x 2.67 mm O.D. [.068" x .105" O.D.] Coaxial Cable B C D A A B C D Physical Properties (Typical) Cable Type Dielectric Material Shield Jacket Air & PTFE Dual layer silver plated copper wire served shield FEP Blue 1.80 mm O.D. [.071" O.D.] 50 26 AWG, 7/34, Silver Plated Copper 0.48 mm O.D. [.019" O.D.] 105 Coax 50 28 AWG, 19/40 Silver Plated Copper 0.33 mm O.D. [.013" O.D.] Foamed FEP Silver plated braid FEP Black 1.65 mm O.D. [.065" O.D.] 048 Coax 75 30 AWG, 7/38, Silver Plated Copper 0.31 mm O.D. [.012" O.D.] Air & PTFE Silver plated braid FEP Gray 1.88 mm O.D. [.074" O.D.] 027 Coax TS-2364-A Sheet 4 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5x1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series Coaxial and Twin Axial Cable Electrical Properties (Typical) Cable Type Capacitance Propagation Delay Attenuation Coaxial Cable 027 Coax 50 74.5 pF/m Max [22.7 pF/ft] 3.81 nS/m [1.16 nS/ft ] -8.23 dB (typical) / 10 m @ 650 MHz 105 Coax 50 87 pF/m Max [26.5 pF/ft] 4.2 nS/m [1.28 nS/ft ] -3 dB (typical) / 3 m @ 500 MHz 054 Coax 75 51.2 pF/m Max [16 pF/ft] 4.00 nS/m [1.22 nS/ft ] -4.76 dB (typical) / 10 m @ 650 MHz 058 Twin Axial 100 42.6 pF/m Max [13.0 pF/ft] 4.17 nS/m [1.27 nS/ft ] -7.79 dB (typical) / 10 m @ 650 MHz 122 Twin Axial 85 5 45.88 pF/m Max [14.0 pF/ft] 3.87 nS/m [1.18 nS/ft ] Contact 3M Twin Axial Cable TS-2364-A Sheet 5 of 5 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. (c) 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.