(888) IPD-CONVerters ● (888) 473-2668 ● www.ipdconverters.com
1
OWT SERIES - TRIPLE OUTPUT, 25 WATT
TECHNICAL SPECIFICATIONS
OWT triple output DC/DC converters provide up to
25 Watts of output power in an industry standard 2” x 2”
package. OWT units feature excellent efficiency, five-
sided shielding, and fixed switching frequency. With
85°C case operation, the OWT is especially suited to
telecom, networking, and industrial applications.
• Industry Standard
Package
• 12V Input
DESCRIPTION FEATURES
• 25W Output
• External Enable Pin
• 5-Sided Shielding
• 500V Isolation
• 85°C Case Operation
Rev. 05/01
Remote Shutdown Positive
Remote Shutdown Reference Vin Negative
Switching Frequency 300 kHz
Isolation
Input - Output 500 VDC
Input - Case 500 VDC
Output - Case 500 VDC
Temperature Coefficient 0.02%/°C
Case Temperature
Operating Range -25 to +60°C1
Storage Range -40 to +125°C
Humidity Max., Non-Condensing 95%
Vibration, 3 Axes, 5 Min Each 5 g, 10 -55 Hz
MTBF† (Bellcore TR-NWT-000332) 1.8 x 106 hrs
Safety UL 1950, CSA 22.2-950, EN60950
General
Voltage Range
12 VDC Nominal 10 - 20 VDC
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 20 - 60 (add -S1 to p/n) or 36 - 72 VDC
Input Ripple Current 20% Iin Max.
Reverse Input Current 100% Iin Max.
Input
Setpoint Accuracy, Vout1 / Vout2 / Vout3 ±1%, ±5%, ± 5%
Line regulation Vin Min. - Vin Max., Iout Rated ±1% Vout
Load regulation Iout Min.- Iout Max., Vin Nom., Vout1 / Vout2 / Vout3
±1%, ±5%, ± 5%
Minimum Output Current 25 %
Dynamic Regulation, Loadstep 25% Iout
Pk Deviation 4% Vout
Settling Time 500 µs
Short Circuit / Overcurrent Protection Continuous
Current Limit Threshold Range, % of Iout Rated 130%
Output
50
55
60
65
70
75
80
85
10 20 30 40 50 60 70 80 90 100
LOAD %
EFFICIENCY %
OWT4805-12
OWT4805-15
50
55
60
65
70
75
80
85
10 20 30 40 50 60 70 80 90 100
LOAD %
EFFICIENCY %
OWT2405-12
OWT2405-15
Efficiency vs. Load (48V Input)
Efficiency vs. Load (24V Input)
Notes
1 Industrial temp range of -40 to +85C available, add suffix -I to P/N
† MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.