Varicon(R) Series 8016 - Rectangular Connector - 20 Way PLUG PLUG SOCKET SOCKET PIN LAYOUT Actuating Screw Fixed Nut Actuating Screw Fixed Nut 20 Way See Variation Code Contact Termination Plug 912/512/612 Number of Contacts 911/511/611 Series Number 001 910/510/610 Prefix 217 909/509/609 020 008/508/608 8016 Receptacle 00 CONNECTOR PLUG AND RECEPTACLE COMBINATIONS 007/507/607 ORDERING CODE 001/501/601 *000 = Contacts not fitted and ordered separately, see page 23 for full list of options 002/502/602 217 = Solder 0.098" x 2.49mm 218 = Wire Wrap - 0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm 296 = Wire Wrap - 0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm 903/503/603 904/504/604 905/505/605 906/506/606 504 = Solder Tail - 750 = Wire Wrap - 0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm Select variation code combinations marked with square in the table. *Crimp contacts always ordered separately. See page 23 for details. VARIATION CODE Insulator Body Type Male (Exposed Contacts) Female (Recessed Contacts) European Version Grey Polyester Aluminum No Cover Cover -- 001 -- 002 903 -- 904 -- 905 -- 906 -- -- 007 -- 008 909 -- 910 -- 911 -- 912 -- USA Versions Grey Polyester Green Polyester No No Cover Cover Cover Cover -- 501 601 -- 502 602 503 603 504 604 505 605 506 606 507 607 508 608 509 -- 609 -- 510 -- 610 -- 511 -- 611 -- 512 -- 612 -- Cover and Cable Entrance None None Top* Side* Top* Side* None None Top* Side* Top* Side* Actuating Screw Yes No Yes Yes No No No Yes Yes Yes No No Fixed Nut No Yes No No Yes Yes Yes No No No Yes Yes *These covers should only be used with crimp contacts. ELCO 13 Varicon(R) Series 8016 - Rectangular Connector - 20 Way CLAMPING AND COVER DIMENSIONS RECOMMENDED LAYOUT FOR FRONT CHASSIS MOUNTING & PCB LAYOUT 3.81 6.35 16.26 O2.44 10 AT 1.90 = 19.00 O3.50 28.58 0.13 32.39 24.38 4.77 10.41 0.13 STANDARD COVERS Cover Part Number Metric Screws Imperial Screws European Version USA Version 30-8016-9829-20-000 30-8016-9829-00-000 30-8016-9831-20-000 30-8016-9831-00-000 Clamp Number of Contacts Cable Entrance Description Size mm (inches) 20 20 Side Top Standard Standard 11.53 (0.454) Dia. 11.53 (0.454) Dia. REMOVABLE SIDE PLATE COVERS millimeters (inches) Cover Part Number Number of Contacts Cable Entrance 30-8016-020-000-413 30-8016-020-000-415 30-8016-020-000-423 30-8016-020-000-425 20 20 20 20 Side/Top 45 Dual 90 Side/Top Dual 45 Entry 14 Description Standard Standard Special Special ELCO Clamp Minimum Size 5 x 10 (0.197 x 0.394) 5 x 10 (0.197 x 0.394) 2 - 5 x 10 (0.197 x 0.394) 2 - 5 x 10 (0.197 x 0.394) Maximum Size 10 x 10 (0.394 x 0.394) 10 x 10 (0.394 x 0.394) 2 - 10 x 10 (0.394 x 0.394) 2 - 10 x 10 (0.394 x 0.394)