Contact Termination
*000 = Contacts not fitted and ordered separately,
see page 23 for full list of options
217 = Solder 0.098" x 2.49mm
218 = Wire Wrap –
0.025 x 0.050 x 0.567" / 0.64 x 1.27 x 14.4mm
296 = Wire Wrap –
0.025 x 0.026 x 0.579" / 0.64 x 1.27 x 19.3mm
504 = Solder Tail –
750 = Wire Wrap –
0.025 x 0.050 x 0.760" / 0.64 x 1.27 x 19.3mm
Plug
001/501/601
002/502/602
903/503/603
904/504/604
905/505/605
906/506/606
Varicon®
Series 8016 – Rectangular Connector – 20 Way
ORDERING CODE
PLUG
Actuating
Screw
PLUG
Fixed
Nut
SOCKET
Actuating
Screw
SOCKET
Fixed
Nut
007/507/607
008/508/608
909/509/609
910/510/610
911/511/611
912/512/612
Receptacle
CONNECTOR PLUG AND
RECEPTACLE COMBINATIONS
European Version USA Versions Cover
Insulator Grey Polyester Grey Polyester Green Polyester and Actu-
Body Aluminum No No No Cable ating Fixed
Type Cover Cover Cover Cover Cover Cover Entrance Screw Nut
—001 — 501 601 None Yes No
—002 — 502 602 None No Yes
Male 903 — 503 603 Top* Yes No
(Exposed 904 — 504 604 Side* Yes No
Contacts) 905 — 505 605 Top* No Yes
906 — 506 606 Side* No Yes
—007 507 607 None No Yes
—008 508 608 None Yes No
Female 909 — 509 — 609 — Top* Yes No
(Recessed 910 — 510 — 610 — Side* Yes No
Contacts) 911 — 511 — 611 — Top* No Yes
912 — 512 — 612 — Side* No Yes
00
Prefix
8016
Series
Number
020
Number of
Contacts
217 001
See
Variation
Code
VARIATION CODE
Select variation code combinations marked with square in the table.
*These covers should only be used with crimp contacts.
*Crimp contacts always ordered separately.
See page 23 for details.
PIN LAYOUT
20
Way
13
ELCO
14
ELCO
Varicon®
Series 8016 – Rectangular Connector – 20 Way
CLAMPING AND COVER DIMENSIONS
16.26
6.35
3.81
Ø2.44
Ø3.50
4.77
32.39
24.38
10 AT 1.90
= 19.00
28.58 ±0.13
10.41 ±0.13
STANDARD COVERS
Cover Part Number Number Cable Clamp
Metric Screws Imperial Screws
European Version USA Version of Contacts Entrance Description Size mm (inches)
30-8016-9829-20-000 30-8016-9829-00-000 20 Side Standard 11.53 (0.454) Dia.
30-8016-9831-20-000 30-8016-9831-00-000 20 Top Standard 11.53 (0.454) Dia.
REMOVABLE SIDE PLATE COVERS millimeters (inches)
Cover Number of Cable Clamp
Part Number Contacts Entrance Description Minimum Size Maximum Size
30-8016-020-000-413 20 Side/Top Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-415 20 45° Standard 5 x 10 (0.197 x 0.394) 10 x 10 (0.394 x 0.394)
30-8016-020-000-423 20 Dual 90° Side/Top Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)
30-8016-020-000-425 20 Dual 45° Entry Special 2 - 5 x 10 (0.197 x 0.394) 2 - 10 x 10 (0.394 x 0.394)
RECOMMENDED LAYOUT
FOR FRONT CHASSIS
MOUNTING & PCB LAYOUT
