INTEGRATED CIRCUITS 74LV132 Quad 2-input NAND Schmitt-trigger Product specification Supersedes data of 1997 Feb 04 IC24 Data Handbook 1998 Apr 28 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 FEATURES APPLICATIONS * Wide operating voltage: 1.0 to 5.5V * Optimized for Low Voltage applications: 1.0 to 3.6V * Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V * Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V, * Wave and pulse shapers * Astable multivibrators * Monostable multivibrators Tamb = 25C DESCRIPTION * Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V, The 74LV132 is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC/HCT132. Tamb = 25C * Output capability: standard * ICC category: SSI The 74LV132 contains four 2-input NAND gates which accept standard input signals. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The gate switches at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the hysteresis voltage VH. QUICK REFERENCE DATA GND = 0V; Tamb = 25C; tr = tf 2.5 ns PARAMETER SYMBOL tPHL/tPLH Propagation delay nA, nB to nY CI Input capacitance CPD Power dissipation capacitance per gate CONDITIONS TYPICAL UNIT 10 ns 3.5 pF 24 pF CL = 15pF VCC = 3.3V Notes 1 and 2 NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in W) PD = CPD VCC2 fi (CL VCC2 fo) where: fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL VCC2 fo) = sum of the outputs. 2. The condition is VI = GND to VCC ORDERING INFORMATION PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 14-Pin Plastic DIL -40C to +125C 74LV132 N 74LV132 N SOT27-1 14-Pin Plastic SO -40C to +125C 74LV132 D 74LV132 D SOT108-1 14-Pin Plastic SSOP Type II -40C to +125C 74LV132 DB 74LV132 DB SOT337-1 14-Pin Plastic TSSOP Type I -40C to +125C 74LV132 PW 74LV132PW DH SOT402-1 PIN DESCRIPTION PIN NUMBER FUNCTION TABLE SYMBOL INPUTS FUNCTION OUTPUT nA nB nY 1, 4, 9, 12 1A to 4A Data inputs L L H 2, 5, 10, 13 1B to 4B Data inputs L H H 3, 6, 8, 11 1Y to 4Y Data outputs H L H GND Ground (0V) H H L 7 14 1998 Apr 28 VCC NOTES: H = HIGH voltage level L = LOW voltage level Positive supply voltage 2 853-1912 19290 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 PIN CONFIGURATION LOGIC SYMBOL 1 1A 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 4 2A 2B 5 10 3B 5 2B 2Y 6 9 3A GND 7 8 3Y 1Y 2 2Y 3Y 12 4A & 3 11 SV00215 & LOGIC DIAGRAM 6 5 & 8 10 12 4Y 13 4B 2 9 8 10 3B LOGIC SYMBOL (IEEE/IEC) 4 6 9 3A SV00213 1 3 1B A Y B & 11 13 SV00217 SV00216 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC PARAMETER CONDITIONS MIN TYP See Note1 DC supply voltage MAX UNIT 1.0 3.3 5.5 V VI Input voltage 0 - VCC V VO Output voltage 0 - VCC V +85 +125 C 500 200 100 50 ns/V Tamb Operating ambient temperature range in free air tr, tf Input rise and fall times except for Schmitt-trigger inputs See DC and AC characteristics VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V to 5.5V -40 -40 - - - - - - - - NOTE: 1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 5.5V. 1998 Apr 28 3 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 ABSOLUTE MAXIMUM RATINGS1, 2 In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). PARAMETER SYMBOL CONDITIONS RATING UNIT -0.5 to +7.0 V VCC DC supply voltage IIK DC input diode current VI < -0.5 or VI > VCC + 0.5V 20 mA IOK DC output diode current VO < -0.5 or VO > VCC + 0.5V 50 mA IO DC output source or sink current - standard outputs -0.5V < VO < VCC + 0.5V 25 IGND, ICC Tstg PTOT DC VCC or GND current for types with - standard outputs mA mA 50 Storage temperature range C -65 to +150 Power dissipation per package - plastic DIL - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) for temperature range: -40 to +125C above +70C derate linearly with 12 mW/K above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K 750 500 400 mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. DC CHARACTERISTICS Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER -40C to +85C TEST CONDITIONS MIN VIH VIL HIGH level Input voltage LOW level Input voltage TYP1 VOH O VOL 1998 Apr 28 HIGH level output voltage; g STANDARD outputs LOW level l l output t t voltage out uts voltage; all outputs MIN 0.9 0.9 VCC = 2.0V 1.4 1.4 VCC = 2.7 to 3.6V 2.0 2.0 VCC = 4.5 to 5.5V 0.7*VCC UNIT MAX V 0.7*VCC VCC = 1.2V 0.3 0.3 VCC = 2.0V 0.6 0.6 VCC = 2.7 to 3.6V 0.8 0.8 0.3*VCC 0.3*VCC VCC = 1.2V; VI = VIH or VIL; -IO = 100A VOH MAX VCC = 1.2V VCC = 4.5 to 5.5 l l output t t HIGH level voltage out uts voltage; all outputs -40C to +125C V 1.2 VCC = 2.0V; VI = VIH or VIL; -IO = 100A 1.8 2.0 1.8 VCC = 2.7V; VI = VIH or VIL; -IO = 100A 2.5 2.7 2.5 VCC = 3.0V; VI = VIH or VIL; -IO = 100A 2.8 3.0 2.8 VCC = 4.5V; VI = VIH or VIL; -IO = 100A 4.3 4.5 4.3 VCC = 3.0V; VI = VIH or VIL; -IO = 6mA 2.40 2.82 2.20 VCC = 4.5V; VI = VIH or VIL; -IO = 12mA 3.60 4.20 3.50 V V VCC = 1.2V; VI = VIH or VIL; IO = 100A 0 VCC = 2.0V; VI = VIH or VIL; IO = 100A 0 0.2 0.2 VCC = 2.7V; VI = VIH or VIL; IO = 100A 0 0.2 0.2 VCC = 3.0V; VI = VIH or VIL; IO = 100A 0 0.2 0.2 VCC = 4.5V; VI = VIH or VIL; IO = 100A 0 0.2 0.2 4 V Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 DC CHARACTERISTICS (Continued) Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). SYMBOL VOL O PARAMETER LOW level output voltage; g STANDARD outputs LIMITS TEST CONDITIONS -40C to +85C -40C to +125C VCC = 3.0V; VI = VIH or VIL; IO = 6mA 0.25 0.40 0.50 VCC = 4.5V; VI = VIH or VIL; IO = 12mA 0.35 0.55 0.65 UNIT V Input leakage current VCC = 5.5V; VI = VCC or GND 1.0 1.0 A ICC Quiescent supply current; SSI VCC = 5.5V; VI = VCC or GND; IO = 0 20.0 40 A ICC Additional quiescent supply current per input VCC = 2.7V to 3.6V; VI = VCC - 0.6V 500 850 A II NOTE: 1. All typical values are measured at Tamb = 25C. TRANSFER CHARACTERISTICS Voltages are referenced to GND = 0V. LIMITS SYMBOL PARAMETER WAVEFORM CONDITION VT- VH Positive going threshold Negative going threshold Hysteresis (VT+ - VT- T ) Figures 1 and 2 Figures 1 and 2 Figures 1 and 2 TYP1 1.2 - 0.70 - - 2.0 0.8 1.10 1.4 0.8 1.4 2.7 1.0 1.45 2.0 1.0 2.0 3.0 1.2 1.60 2.2 1.2 2.2 3.6 1.5 1.95 2.4 1.5 2.4 4.5 1.7 2.50 3.2 1.7 3.2 5.5 2.1 3.00 3.9 2.1 3.9 1.2 - 0.34 - - - 2.0 0.3 0.65 0.9 0.3 0.9 2.7 0.4 0.90 1.4 0.4 1.4 3.0 0.6 1.05 1.5 0.6 1.5 3.6 0.8 1.30 1.8 0.8 1.8 4.5 0.9 1.60 2.0 0.9 2.0 5.5 1.2 2.00 2.6 1.2 2.6 1.2 - 0.30 - - - 2.0 0.2 0.55 0.8 0.2 0.8 2.7 0.3 0.60 1.1 0.3 1.1 3.0 0.4 0.65 1.2 0.4 1.2 3.6 0.4 0.70 1.2 0.4 1.2 4.5 0.4 0.80 1.4 0.4 1.4 5.5 0.6 1.00 1.5 0.6 1.5 NOTE: 1. Unless otherwise stated, all typical values are at Tamb = 25C. 1998 Apr 28 -40 to +125C MIN VCC(V) VT+ -40 to +85C 5 MAX MIN UNIT MAX V V V Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 AC CHARACTERISTICS GND = 0V; tr = tf = 2.5ns; CL = 50pF LIMITS SYMBOL tPHL/tPLH PARAMETER CONDITION WAVEFORM Propagation delay nA, nB, to nY -40 to +85C -40 to +125C VCC(V) MIN TYP1 MAX MIN MAX 1.2 - 65 - - - 2.0 - 18 34 - 43 Figure 6 2.7 - 15 24 - 30 3.0 to 3.6 - 122 20 - 25 4.5 to 5.5 - 9.02 14 - 17 0 0.3 UNIT ns NOTES: 1. Unless otherwise stated, all typical values are at Tamb = 25C. 2. Typical value measured at VCC = 3.3V. 3. Typical value measured at VCC = 5.0V. TRANSFER CHARACTERISTIC WAVEFORMS 10 ICC (A) VO 8 6 4 2 VH VT- 0 VT+ 0.6 0.9 VIN (V) SV00218 Figure 1. Transfer characteristic. 1.2 SV00222 Figure 3. Typical LV132 transfer characteristics; VCC = 1.2V. 100 VI VT+ VT- ICC (A) VM 80 60 VO 40 SV00220 Figure 2. Definition of VT+, VT- and VH; where VT+ and VT- are between limits of 20% and 70%. 20 0 0 0.4 0.8 1.2 1.6 2.0 VIN (V) SV00224 Figure 4. Typical LV132 transfer characteristics; VCC = 2.0V. 1998 Apr 28 6 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 TRANSFER CHARACTERISTIC WAVEFORMS (Continued) TEST CIRCUIT Vcc 250 VO Vl ICC (A) PULSE GENERATOR D.U.T. 200 50pF RT RL= 1k CL Test Circuit for Outputs 150 DEFINITIONS RL = Load resistor CL = Load capacitance includes jig and probe capacitiance 100 RT = Termination resistance should be equal to ZOUT of pulse generators. TEST 50 VCC tPLH/tPHL 0 0 1.8 1.2 0.6 3.0 2.4 VIN (V) AC WAVEFORMS VM = 1.5V at VCC 2.7V 3.6V VM = 0.5V * VCC at VCC 2.7V and 4.5V VOL and VOH are the typical output voltage drop that occur with the output load. VCC VM GND tPHL tPLH VOH nY OUTPUT VM VOL SV00219 Figure 6. Input (nA, nB) to output (nY) propagation delays. 1998 Apr 28 VCC 2.7V 4.5 V VCC SV00902 Figure 5. Typical LV132 transfer characteristics; VCC = 3.0V. VM < 2.7V 2.7-3.6V Figure 7.Load circuitry for switching times. SV00225 nA, nB INPUT VI 7 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 DIP14: plastic dual in-line package; 14 leads (300 mil) 1998 Apr 28 8 SOT27-1 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 SO14: plastic small outline package; 14 leads; body width 3.9 mm 1998 Apr 28 9 SOT108-1 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm 1998 Apr 28 10 SOT337-1 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm 1998 Apr 28 11 SOT402-1 Philips Semiconductors Product specification Quad 2-input NAND Schmitt-trigger 74LV132 Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 print code Document order number: yyyy mmm dd 12 Date of release: 08-98 9397-750-04422