English
Search ...
PRODUCTS APPLICATIONS DESIGN SUPPORT SAMPLE AND BUY ABOUT US CONTACT US MYMICROCHIP LOGIN
| | | | | |
MCP39F501 Energy Metering & Power Monitoring
Demonstration Board
Part Number: ARD00455
BUY
IT NOW
Share
The MCP39F501 Power Monitor Demonstration Board is a fully functional single-phase
power monitor. This low-cost design does not use any transformers and requires few
external components. The device calculates active power, reactive power, RMS current,
RMS voltage, power factor, line frequency and other typical power quantities as defined
in the MCP39F501 data sheet. The MCP39F501 Power Monitor Utility software is used
to calibrate and monitor the system, and can be used to create custom calibration
setups. For some accuracy requirements, only a single point calibration may be needed.
Devices Supported: MCP39F501
Back To TopDocumentation & Software
Documents Last Updated Size
MCP39F501 Energy Metering & Power Monitoring Demo Board
(ARD00455) Schematics
4/28/2015 9:19:24 AM 455KB
MCP39F501 Energy Metering & Power Monitoring Demo Board
Software v2.2
8/19/2014 3:21:09 PM 6MB
MCP39F501 Power Monitor Demo Board User's Guide 2/15/2014 8:41:14 AM 817KB
MCP39F501 Energy Metering & Power Monitoring Demo Board
(ARD00455) BOM
12/20/2013 9:10:46 PM 26KB
MCP39F501 Energy Metering & Power Monitoring Demo Board
(ARD00455) Gerbers
12/20/2013 7:54:00 PM 631KB
MCP39F501 12/18/2013 4:04:04 PM 2KB
Package Contents
Displays Active, Reactive and Apparent Power, RMS Current, RMS Voltage, Line Frequency, Power Factor and
Temperature using PC software
Event notifications, such as Over Current, Over Power, Over/Under Frequency, Over/Under Temperature,
and Voltage Sag/Surge
Device configuration through PC software, including Event Notifications, Gain Calibration, EEPROM,
Calculation Multipliers, and I/O settings
120V and 220V operation
Features
