www.vishay.com
8
CRA06P
Vishay Dale
Document Number 31047
Revision 05-Sep-03
For Technical Questions, contact: ff2aresistors@vishay.com
FEATURES
• Concave terminal array with square corners
• 8 terminal package with isolated resistors
• Single component reduces board space and component
counts
• Automatic placement capability
• Wave and solder paste reflow compatible
• Thick film resistance element
• Solderable wrap around termination
• Nickel barrier for inner electrode protection
• Standard E-24 (± 2% and 5%) and E-96 (± 1%) resistance
values
• Operating temperature range of -55°C to +150°C
• Consult factory for additional schematics, values, etc
ORDERING INFORMATION
CRA06P
MODEL
RT1
PACKAGING
08
08
TERMINAL COUNT
03 Isolated
only.
03
CIRCUIT TYPE
105
RESISTANCE VALUE
First 2 digits are significant
figures, the last digit is the
multiplier.
J
TOLERANCE
J= ± 5%
G = ± 2%
F = ± 1%
Z = 0Ω Jumper
Paper tape.
5000 piece
reels.
Thick Film Resistor Array
•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
•Operating temperature Range: - 55°C to + 150°C
•Maximum Working Voltage: 50 volts. Rated continuous working voltage (RCWV) shall be determined from RCWV = square root of
Rated Power, Resistance Value or 50 volts whichever is less.
•Ask about extended value ranges
•Packaging: according to EIA 481
PARAMETER UNIT CRA06P
03 CIRCUIT
Rated Dissipation at 70°C W 0.0625
Limiting Element Voltage
1)
V쓖50
Insulation Voltage (1min) Vdc/ac peak 100
Category Temperature Range
°C - 55 / + 150
Insulation Resistance Ω> 10
10
TECHNICAL SPECIFICATIONS
1)Rated voltage: PxR
STANDARD ELECTRICAL SPECIFICATIONS
MODEL POWER RATING CIRCUIT LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE E-SERIES
P70°CVOLTAGE MAX. COEFFICIENT RANGE
WV쓖ppm/°C% Ω
CRA06P 0.0625 03 50 200 2, 5 10R-1M0 24
Jumper: Zero-Ohm-Resistor on Request 100 1 10R-1M0 24-96
www.vishay.com
9
CRA06P
Vishay Dale
Document Number 31047
Revision 05-Sep-03 For Technical Questions, contact: ff2aresistors@vishay.com
DIMENSIONS in inches [millimeters]
TEST CONDITIONS OF TEST TEST RESULTS
Endurance Test at 70°C 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" ± 1.0%
per EIA 575-3.14
Overload Short time overload ± 0.5%
per EIA 575-3.6
Thermal Shock per EIA 575-3.5 ± 0.5%
Moisture Resistance per EIA 575-3.10 ± 1.0%
Resistance to Soldering Heat 10 seconds at 260°C solder bath temperature ± 1.0%
EIA 575 3.8
High Temperature Exposure per EIA 575-3.7 ± 1.0%
Low Temperature Operation per EIA-/ IS-30A-3.6 ± 0.5%
Solderability & Leaching EIA 575-3.12 95% Coverage
PERFORMANCE
Derating Ambient Temperature °C
120
100
80
60
40
20
0
Rated Power %
-55 -25 0 25 50 75 100 125 150
Thick Film, Resistor Array
4-Resistor Device
CIRCUIT SCHEMATICS
03 Circuit CRA06P
8 PIN DIMENSIONS
LABCPTW
mm 3.20 0.30 0.40 0.40 0.80 0.60 1.6
Tol ± 0.20 ± 0.20 ± 0.15 ± 0.20 - ± 0.10 ± 0.15
8-pin
ac
w
t
b
p
L
70
SOLDER PAD DIMENSIONS [in millimeters]
cwpab
WAVE 0.8 2.6 0.8 0.4 0.9
c
b
pa
w
