GBL005 thru GBL10
Document Number 88609
29-Jul-05
Vishay General Semiconductor
www.vishay.com
1
Case Type GBL
~
~
~~
Glass Passivated Single-Phase Bridge Rectifier
Major Ratings and Characteristics
IF(AV) 4 A
VRRM 50 V to 1000 V
IFSM 150 A
IR5 µA
VF1.0 V
Tj max. 150 °C
Features
• UL Recognition file number E54214
• Ideal for printed circuit boards
• High surge current capability
• Typical IR less than 0.1µA
• High case dielectric strength
• Solder Dip 260 °C, 40 seconds
Typical Applications
General purpose use in ac-to-dc bridge full wave rec-
tification for Monitor, TV, Printer, SMPS, Adapter,
Audio equipment, and Home Appliances application
Mechanical Data
Case: GBL
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solder-
able per J-STD-002B and JESD22-B102D
Polarity: As marked on body
Maximum Ratings
Ratings at 25 °C ambient temperature unless otherwise specified.
Parameter Symbol GBL
005
GBL
01
GBL
02
GBL
04
GBL
06
GBL
08
GBL
10
Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified TC = 50 °C
output current at TA = 40 °C
IF(AV) 4.0(1)
3.0(2)
A
Peak forward surge current single sine-wave
superimposed on rated load
IFSM 150 A
Rating for fusing (t < 8.3 ms) I2t 93 A2sec
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
www.vishay.com
2
Document Number 88609
29-Jul-05
GBL005 thru GBL10
Vishay General Semiconductor
Electrical Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Thermal Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Notes:
(1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate
(2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (12 x12 mm) copper pads
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbol GBL
005
GBL
01
GBL
02
GBL
04
GBL
06
GBL
08
GBL
10
Unit
Maximum instantaneous forward
voltage drop per leg
at 4.0 A VF 1.00 V
Maximum DC reverse current at
rated DC blocking voltage per leg
TA = 25 °C
TA = 125 °C
IR 5.0
500
µA
Typical junction capacitance per
leg
at 4.0 V, 1 MHz CJ95 40 pF
Parameter Symbol GBL
005
GBL
01
GBL
02
GBL
04
GBL
06
GBL
08
GBL
10
Unit
Typical thermal resistance per leg RθJA
RθJC
22(2)
3.5(1)
°C/W
Figure 1. Derating Curves Output Rectified Current
050 100 150
0
1.0
2.0
3.0
4.0
5.0
Average Forward Output Current (A)
Ambient Temperature (°C)
60 Hz Resistive or Inductive Load
P.C.B. Mounting
0.47 x 0.47" (12 x 12 mm)
Copper pads with 0.375"
(9.5 mm) lead length
Heat-Sink Mounting
3.0 x 3.0 x 0.11" Thick
(7.5 x 7.5 x 0.3 cm)
Aluminum Plate
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Per Leg
110 100
0
50
100
150
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
TJ=T
J max.
Single Sine-Wave
1.0 Cycle
GBL005 thru GBL10
Document Number 88609
29-Jul-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Typical Forward Voltage Characteristics Per Leg
Figure 4. Typical Reverse Characteristics Per Leg
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
1
10
100
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
TJ= 25°C
Pulse width = 300μs
1% Duty Cycle
020 40 60 80 100
0.01
0.1
1
10
100
500
Instantaneous Reverse Current (A)
Percent of Rated Peak Reverse Voltage (V)
T
A= 125°C
T
A=25°C
50 — 400 V
600 — 1000 V
Figure 5. Typical Junction Capacitance Per Leg
Figure 6. Typical Transient Thermal Impedance Per Leg
0.1 110 100
10
100
1,000
Junction Capacitance (pF)
Reverse Voltage (V)
TJ=25°C
f = 1.0 MHz
Vsig = 50mVp-p
50 — 400V
600 — 1000V
0.01 0.1 110 100
0.1
1
10
100
Transient Thermal Impedance ( °C/W)
t, Heating Time (sec.)
0.125 (3.17)
x4 5 degrees
Chamfer
0.080 (2.03)
0.060 (1.50)
0.095 (2.41)
0.080 (2.03)
0.825 (20.9)
0.815 (20.7)
0.050 (1.27)
0.040 (1.02)
Polarity shown on front side of case, positive lead beveled corner .
0.040 (1.02)
0.030 (0.76)
0.022 (0.56)
0.018 (0.46)
0.210
0.190
(5.3)
(4.8)
0.421 (10.7)
0.41 1 (10.4)
0.718 (18.2)
0.682 (17.3)
0.140 (3.56)
0.128 (3.25)
Lead Depth
0.098 (2.5)
0.075 (1.9)
0.098 (2.5)
0.075 (1.9)
0.026 (0.66)
0.020 (0.51)
Case Type GBL
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
