ES07B / ES07D Vishay Semiconductors Small Surface Mount Ultrafast Diodes Features * * * * * For surface mounted applications Low profile package e3 Ideal for automated placement Glass passivated High temperature soldering: 260 C/ 10 seconds at terminals * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Mechanical Data (SMF(R)) Case: JEDEC DO-219AB Plastic case Polarity: Band denotes cathode end Weight: approx. 15 mg 17249 Packaging codes-options: GS18 / 10 K per 13" reel (8 mm tape), 50 k/box GS08 / 3 K per 7" reel (8 mm tape), 30 k/box Parts Table Part Ordering code Marking Remarks ES07B ES07B-GS18 or ES07B-GS08 EB Tape and Reel ES07D ES07D-GS18 or ES07D-GS08 ED Tape and Reel Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Part Symbol Value Unit ES07B VRRM 100 V ES07D VRRM 200 V ES07B VRMS 70 V ES07D VRMS 140 V ES07B VDC 100 V VDC 200 V Maximum average forward rectified current Ttp = 105 C ES07D IF(AV) 1.2 A 1) IF(AV) 0.5 A IFSM 30 A TA = 65 C Peak forward surge current 8.3 ms single half sine-wave TL = 25 C 1) Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads ( 40 m thick) Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Thermal resistance junction to ambient Test condition air1) Operating junction and storage temperature range Symbol Value Unit RthJA 180 K/W TJ, TSTG - 55 to + 150 C 1) Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads ( 40 m thick) Document Number 85737 Rev. 1.7, 13-Apr-05 www.vishay.com 1 ES07B / ES07D Vishay Semiconductors Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Maximum instantaneous forward voltage Test condition 1.0 A3) Maximum DC reverse current at TA = 25C rated DC blocking voltage Symbol Max Unit VF Min Typ. 0.98 V IR 10 A TA = 100C IR 50 A Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A trr 25 ns Typical capacitance 4 V, 1 MHz Cj 3) 4 pF Pulse test, 300 s pulse with 1 % duty cycle Typical Characteristics (Tamb = 25 C unless otherwise specified) 10 7,00 f = 1MHz 6,00 5,00 0,1 CD [pF] IF [A] 1 typical @ 25C typical @ 150C typical @ 100C 4,00 3,00 2,00 0,01 1,00 0,001 0,00 0,20 18242 0,40 0,60 0,80 VF [V] 1,00 1,20 0,00 0,1 1,40 1 10 VR [V] 18244 Figure 3. Typ. Diode Capacitance vs. Reverse Voltage Figure 1. Typical Forward Characteristics 1000 1,4 TJ=25C TJ=50C TJ=75C TJ=100C TJ=125C TJ=150C TJ=0C TJ=-50C ambient temperature tie point temperature 1,2 100 1,0 IR [A] Average Forward Current [A] 100 0,8 10 1 0,6 0,4 0,1 0,2 0,0 0 18243 0,01 0 25 100 50 75 Temperature (Ambient or Tie) [C] 125 150 18245 20 40 60 80 100 120 140 160 180 200 VR [V] Figure 4. Typical Reverse Characteristics Figure 2. Forward Current Derating Curve www.vishay.com 2 Document Number 85737 Rev. 1.7, 13-Apr-05 ES07B / ES07D Vishay Semiconductors Package Dimensions in mm (Inches) 0.85 (0.033) 0.35 (0.014) 3.9 (0.152) 3.5 (0.137) 5 0.16 (0.006) 0.99 (0.039) 0.97 (0.038) Z 5 Cathode Band Top View Detail Z enlarged 1.9 (0.074) 1.7 (0.066) 1.2 (0.047) 0.8 (0.031) 0.10 max 2.9 (0.113) 2.7 (0.105) ISO Method E Mounting Pad Layout 1.6 (0.062) 1.3 (0.051) 1.4 (0.055) 17247 Document Number 85737 Rev. 1.7, 13-Apr-05 www.vishay.com 3 ES07B / ES07D Vishay Semiconductors Blistertape for SMF PS 18513 www.vishay.com 4 Document Number 85737 Rev. 1.7, 13-Apr-05 ES07B / ES07D Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect t their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number 85737 Rev. 1.7, 13-Apr-05 www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ES07D-GS08