MCC 1N5913 THRU 1N5956 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * 1.5 Watt Zener Diode 3.3 to 200 Volts Wide Voltage Range Available Plastic Package High Temp Soldering: 250C for 10 Seconds At Terminals Maximum Ratings * * * * * DO-41G Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C 1.5 Watt DC Power Dissipation Power Derating: 12 mW/C above 75C Forward Voltage @ 200mA: 1.2 Volts Figure 1 - Typical Capacitance D 100 At zero volts At -2 Volts V R A pf Cathode Mark 10 B D 1 0 100 200 VZ C Typical Capacitance (pf) - versus - Zener voltage (VZ) Figure 2 - Derating Curve 2.0 DIMENSIONS DIM A B C D W 1.0 INCHES MIN .166 .080 .028 1.000 MAX .205 .107 .034 --- MM MIN 4.10 2.00 .70 25.40 MAX 5.20 2.70 .90 --- NOTE 0 50 100 150 Temperature C Power Dissipation (mW) - Versus - Temperature C Revision: 3 www.mccsemi.com 2003/09/03 MCC 1N5913 thru 1N5956 ELECTRICAL CHARACTERISTICS @25C ZENER VOLTAGE VZ MCC PART NUMBER VOLTS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 1N5913 1N5914 1N5915 1N5916 1N5917 1N5918 1N5919 1N5920 1N5921 1N5922 1N5923 1N5924 1N5925 1N5926 1N5927 1N5928 1N5929 1N5930 1N5931 1N5932 1N5933 1N5934 1N5935 1N5936 1N5937 1N5938 1N5939 1N5940 1N5941 1N5942 1N5943 1N5944 1N5945 1N5946 1N5947 1N5948 1N5949 1N5950 1N5951 1N5952 1N5953 1N5954 1N5955 1N5956 TEST CURRENT IZT mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 MAXIMUM DYNAMIC IMPEDANCE ZZT @ IZT OHMS 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 KNEE CURRENT IZK mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 KNEE IMPEDANCE ZZK OHMS 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 MAXIMUM REVERSE CURRENT IR A 100 75 25 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 REVERSE VOLTAGE VR VOLTS 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 MAXIMUM DC CURRENT IZM mA 454 416 384 348 319 294 267 241 220 200 182 164 150 125 125 115 100 93 83 75 68 62 55 50 45 41 38 34 31 29 26 24 22 20 18 16 15 13 12 11 10 9.0 8.0 7.0 Note 1: No suffix indicates a 20% tolerance on nominal VZ, Suffix A denotes a 10% tolerance, B denotes a 5% tolerance, C denotes a 2%, and D suffix denotes a 1% tolerance. o 2: Zener voltage(V Z ) measured at TL = 30 C. Voltage measurement to be performed 20 seconds after application of DC current. 3: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the DC Zener current(IZT or IZK) is superimposed on IZT or IZK. Revision: 3 www.mccsemi.com 2003/09/03