1N5913
THRU
1N5956
1.5 Watt
Zener Diode
3.3 to 200 Volts
DO-41G
Features
• Wide Voltage Range Available
• Plastic Package
• High Temp Soldering: 250°C for 10 Seconds At Terminals
Maximum Ratings
• Operating Temperature: -55°C to +150°C
• Storage Temperature: -55°C to +150°C
• 1.5 Watt DC Power Dissipation
• Power Derating: 12 mW/°C above 75°C
• Forward Voltage @ 200mA: 1.2 Volts
DIMENSIONS
INCHES
MM
DIM MIN MAX MIN MAX NOTE
A .166 .205 4.10 5.20
B .080 .107 2.00 2.70
C .028 .034 .70 .90
D 1.000 --- 25.40 ---
Figure 2 - Derating Curve
Power Dissipation (mW) - Versus - Temperature °C
Temperature °C
0 50 100 150
W
1.0
2.0
Typical Capacitance (pf) – versus – Zener voltage (VZ)
Figure 1 - Typical Capacitance
0
100
200
1
10
100
pf
VZ
At zero volts
At –2 Volts VR
A
B
C
D
D
Cathode
Mark
www.mccsemi.com
Revision: 3 2003/09/03
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
ELECTRICAL CHARACTERISTICS @25°C
MCC
PART
NUMBER
ZENER
VOLTAGE
VZ
TEST
CURRENT
IZT
MAXIMUM
DYNAMIC
IMPEDANCE ZZT
@ IZT
KNEE
CURRENT
IZK
KNEE
IMPEDANCE ZZK MAXIMUM
REVERSE
CURRENT
IR
REVERSE
VOLTAGE
VR
MAXIMUM
DC CURRENT
IZM
VOLTS mA OHMS mA OHMS µA VOLTS mA
1N5913 3.3 113.6 10 1.0 500 100 1.0 454
1N5914 3.6 104.2 9.0 1.0 500 75 1.0 416
1N5915 3.9 96.1 7.5 1.0 500 25 1.0 384
1N5916 4.3 87.2 6.0 1.0 500 5.0 1.0 348
1N5917 4.7 79.8 5.0 1.0 500 5.0 1.5 319
1N5918 5.1 73.5 4.0 1.0 350 5.0 2.0 294
1N5919 5.6 66.9 2.0 1.0 250 5.0 3.0 267
1N5920 6.2 60.5 2.0 1.0 200 5.0 4.0 241
1N5921 6.8 55.1 2.5 1.0 200 5.0 5.2 220
1N5922 7.5 50 3.0 0.5 400 5.0 6.0 200
1N5923 8.2 45.7 3.5 0.5 400 5.0 6.5 182
1N5924 9.1 41.2 4.0 0.5 500 5.0 7.0 164
1N5925 10 37.5 4.5 0.25 500 5.0 8.0 150
1N5926 11 34.1 5.5 0.25 550 1.0 8.4 125
1N5927 12 31.2 6.5 0.25 550 1.0 9.1 125
1N5928 13 28.8 7.0 0.25 550 1.0 9.9 115
1N5929 15 25 9.0 0.25 600 1.0 11.4 100
1N5930 16 23.4 10 0.25 600 1.0 12.2 93
1N5931 18 20.8 12 0.25 650 1.0 13.7 83
1N5932 20 18.7 14 0.25 650 1.0 15.2 75
1N5933 22 17 17.5 0.25 650 1.0 16.7 68
1N5934 24 15.6 19 0.25 700 1.0 18.2 62
1N5935 27 13.9 23 0.25 700 1.0 20.6 55
1N5936 30 12.5 28 0.25 750 1.0 22.8 50
1N5937 33 11.4 33 0.25 800 1.0 25.1 45
1N5938 36 10.4 38 0.25 850 1.0 27.4 41
1N5939 39 9.6 45 0.25 900 1.0 29.7 38
1N5940 43 8.7 53 0.25 950 1.0 32.7 34
1N5941 47 8.0 67 0.25 1000 1.0 35.8 31
1N5942 51 7.3 70 0.25 1100 1.0 38.8 29
1N5943 56 6.7 86 0.25 1300 1.0 42.6 26
1N5944 62 6.0 100 0.25 1500 1.0 47.1 24
1N5945 68 5.5 120 0.25 1700 1.0 51.2 22
1N5946 75 5.0 140 0.25 2000 1.0 56 20
1N5947 82 4.6 160 0.25 2500 1.0 62.2 18
1N5948 91 4.1 200 0.25 3000 1.0 69.2 16
1N5949 100 3.7 250 0.25 3100 1.0 76 15
1N5950 110 3.4 300 0.25 4000 1.0 83.6 13
1N5951 120 3.1 380 0.25 4500 1.0 91.2 12
1N5952 130 2.9 450 0.25 5000 1.0 98.8 11
1N5953 150 2.5 600 0.25 6000 1.0 114 10
1N5954 160 2.3 700 0.25 6500 1.0 121.6 9.0
1N5955 180 2.1 900 0.25 7000 1.0 136.8 8.0
1N5956 200 1.9 1200 0.25 8000 1.0 152 7.0
1N5913 thru 1N5956 MCC
Note 1: No suffix indicates a 20% tolerance on nominal VZ, Suffix A denotes a 10% tolerance, B denotes a 5%
tolerance, C denotes a 2%, and D suffix denotes a 1% tolerance.
2: Zener voltage(VZ) measured at TL = 30oC. Voltage measurement to be performed 20 seconds after
application of DC current.
3: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an
rms value equal to 10% of the DC Zener current(IZT or IZK) is superimposed on IZT or IZK.
www.mccsemi.com
Revision: 3 2003/09/03
