Document Number: 42037 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 06-Sep-11 459
Aluminum Capacitors
+ 85 °C, Tubular, Axial Lead, General Purpose
53D
Vishay Sprague
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
General purpose capacitor
Rugged construction
Largest CV ratings in axial leaded capacitor
Fig.1 Component outlines
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in mm
0.75" x 1.125"
[19.05 x 28.575]
to
1.375"x 4.125"
[34.925 x 104.775]
Operating temperature - 40 °C to + 85 °C
Rated capacitance range, CR15 µF to 220 000 µF
Tolerance on CR- 10 %, + 50 %; - 10 %, + 75 %
Rated voltage range, UR6.3 WVDC to 450 WVDC
Termination Axial leads
Life validation test at 85 °C
1000 h: CAP 15 % from initial
measurement. ESR
1.5 x initial specified limit.
DCL initial specified limit
Shelf life at 85 °C
500 h: CAP 10 % from initial
measurement. ESR
1.3 x initial specified limit.
DCL 2.0 x initial
specified limit.
DC leakage current
I = K
K = 6.0 at + 25 °C;
36.0 at + 85 °C
I in µA, C in µF, V in Volts
cv
·
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
AMBIENT TEMPERATURE MULTIPLIERS
+ 75 °C 1.4
+ 65 °C 1.7
+ 45 °C and below 2.0
FREQUENCY (Hz)
WVDC 50 to 60 300 to 400 1000 AND UP
0 to 50 0.85 1.10 1.15
51 to 299 0.85 1.15 1.20
300 to up 0.80 1.30 1.40
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C - 40 °C/C + 25 °C MINIMUM at 120 Hz
Rated Voltage (WVDC) Capacitance Remaining
0 to 40 35
41 to 63 45
64 to 100 60
101 to 350 20
351 to 450 15
ESR RATIO ESR - 40 °C/ESR + 25 °C MAXIMUM at 120 Hz
Rated Voltage (WVDC) Multiplier
0 to 40 60
41 to 63 55
64 to 100 65
101 to 350 180
351 to 450 190
DIMENSIONS in inches [millimeters]
CASE
CODE
STYLE 6 AND 7 TYPICAL
WEIGHT
CASE
CODE
STYLE 6 AND 7 TYPICAL
WEIGHT
DL D L
GE 0.760 ± 0.020
[19.3 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.46 oz.
(13 g) GL 0.760 ± 0.020
[19.3 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
0.74 oz.
(21 g)
GJ 0.760 ± 0.020
[19.3 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
0.67 oz.
(19 g) GP 0.760 ± 0.020
[19.3 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
0.88 oz.
(25 g)
GS 0.760 ± 0.020
[19.3 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
1.16 oz.
(33 g) KS 1.135 ± 0.020
[28.8 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
2.54 oz.
(72 g)
GT 0.760 ± 0.020
[19.3 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
1.34 oz.
(38 g) KT 1.135 ± 0.020
[28.8 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
2.96 oz.
(84 g)
HE 0.885 ± 0.020
[22.5 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.63 oz.
(18 g) KD 1.135 ± 0.020
[28.8 ± 0.51]
4.141 ± 0.062
[105.2 ± 1.58]
3.35 oz.
(95 g)
53D
Vishay Sprague Aluminum Capacitors
+ 85 °C, Tubular, Axial Lead, General Purpose
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42037
460 Revision: 06-Sep-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS AND AVAILABLE FORMS
HJ 0.885 ± 0.020
[22.5 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
0.95 oz.
(27 g) LE 1.260 ± 0.020
[32.0 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
1.13 oz.
(32 g)
HL 0.885 ± 0.020
[22.5 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
1.02 oz.
(29 g) LJ 1.260 ± 0.020
[32.0 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
1.62 oz.
(46 g)
HP 0.885 ± 0.020
[22.5 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
1.38 oz.
(39 g) LL 1.260 ± 0.020
[32.0 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
2.11 oz.
(60 g)
HS 0.885 ± 0.020
[22.5 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
1.73 oz.
(49 g) LP 1.260 ± 0.020
[32.0 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
2.65 oz.
(75 g)
HT 0.885 ± 0.020
[22.5 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
2.08 oz.
(59 g) LS 1.260 ± 0.020
[32.0 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
3.14 oz.
(89 g)
JE 1.010 ± 0.020
[25.7 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.81 oz.
(23 g) LT 1.260 ± 0.020
[32.0 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
3.63 oz.
(103 g)
JJ 1.010 ± 0.020
[25.7 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
1.02 oz.
(29 g) LD 1.260 ± 0.020
[32.0 ± 0.51
4.141 ± 0.062
[105.2 ± 1.58]
4.16 oz.
(118 g)
JL 1.010 ± 0.020
[25.7 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
1.55 oz.
(44 g) ME 1.375 ± 0.020
[34.9 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
1.38 oz.
(39 g)
JP 1.010 ± 0.020
[25.7 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
1.87 oz.
(53 g) MJ 1.375 ± 0.020
[34.9 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
1.98 oz.
(56 g)
JS 1.010 ± 0.020
[25.7 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
2.22 oz.
(63 g) ML 1.375 ± 0.020
[34.9 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
2.57 oz.
(73 g)
JT 1.010 ± 0.020
[25.7 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
2.54 oz.
(72 g) MP 1.375 ± 0.020
[34.9 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
3.21 oz.
(91 g)
KE 1.135 ± 0.020
[28.8 ± 0.51]
1.141 ± 0.062
[29.0 ± 1.58]
0.92 oz.
(26 g) MS 1.375 ± 0.020
[34.9 ± 0.51]
3.141 ± 0.062
[79.8 ± 1.58]
3.81 oz.
(108 g)
KJ 1.135 ± 0.020
[28.8 ± 0.51]
1.641 ± 0.062
[41.7 ± 1.58]
1.31 oz.
(37 g) MT 1.375 ± 0.020
[34.9 ± 0.51]
3.641 ± 0.062
[92.5 ± 1.58]
4.44 oz.
(126 g)
KL 1.135 ± 0.020
[28.8 ± 0.51]
2.141 ± 0.062
[54.4 ± 1.58]
1.73 oz.
(49 g) MD 1.375 ± 0.020
[34.9 ± 0.51]
4.141 ± 0.062
[105.2 ± 1.58]
5.04 oz.
(143 g)
KP 1.135 ± 0.020
[28.8 ± 0.51]
2.641 ± 0.062
[67.1 ± 1.58]
2.15 oz.
(61 g) - - - -
DIMENSIONS in inches [millimeters]
CASE
CODE
STYLE 6 AND 7 TYPICAL
WEIGHT
CASE
CODE
STYLE 6 AND 7 TYPICAL
WEIGHT
DL D L
D
C
L
L
PVC sleeve
63.50
min.
63.50
min.
Document Number: 42037 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 06-Sep-11 461
53D
Aluminum Capacitors
+ 85 °C, Tubular, Axial Lead, General Purpose Vishay Sprague
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING EXAMPLE
Electrolytic capacitor 53D series: 53D 282 G 025 GJ 6
Note
• For lead (Pb)-free/RoHS compliant products add suffix “E3” to part number.
Example: 53D282G025GJ6E3
DESCRIPTION
CODE EXPLANATION
53D Product type
282 Capacitance value (2800 µF)
G Tolerance (G = - 10 %/+ 75 %; F = - 10 %/+ 50 %)
025 Voltage rating at 85 °C (025 = 25 V)
GJ Can size (see dimensions table)
6 Sleeve and sealing (6 = P.V.C. sleeve)
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(µF)
CASE
CODE PART NUMBER
MAX. ESR at + 25 °C
120 Hz
(m)
MAX. RMS RIPPLE at + 85 °C
120 Hz
(mA)
16 WVDC at + 85 °C, SURGE = 18 V
6900.0 HJ 53D692G016HJ6 73 2150
10000.0 HL 53D103G016HL6 52 2840
25 WVDC at + 85 °C, SURGE = 35 V
2800.0 GJ 53D282G025GJ6 103 1650
4300.0 HJ 53D432G025HJ6 72 2170
6200.0 HL 53D622G025HL6 51 2870
11000.0 JP 53D113G025JP6 33 4230
35 WVDC at + 85 °C, SURGE = 45 V
1100.0 GE 53D112G035GE6 219 980
2100.0 GJ 53D212G035GJ6 111 1590
3200.0 HJ 53D322G035HJ6 77 2090
4700.0 HL 53D472G035HL6 54 2780
8300.0 JP 53D832G035JP6 34 4110
50 WVDC at + 85 °C, SURGE = 70 V
1000.0 GE 53D102G050GE6 231 950
1300.0 GJ 53D132G050GJ6 131 1470
1900.0 HJ 53D192G050HJ6 94 1900
2800.0 HL 53D282G050HL6 65 2540
3800.0 JL 53D382G050JL6 51 3090
5000.0 JP 53D502G050JP6 40 3810
63 WVDC at + 85 °C, SURGE = 80 V
1000.0 GJ 53D102G063GJ6 145 1400
2200.0 HL 53D222G063HL6 86 2210
200 WVDC at + 85 °C, SURGE = 250 V
350.0 JL 53D351F200JL6 499 1000
460.0 JP 53D461F200JP6 379 1250
250 WVDC at + 85 °C, SURGE = 300 V
56.0 GE 53D560F250GE6 3035 263
100.0 GJ 53D101F250GJ6 1593 420
130.0 HJ 53D131F250HJ6 1238 520
400 WVDC at + 85 °C, SURGE = 450 V
100.0 JL 53D101F400JL6 1524 560
140.0 JS 53D141F400JS6 1084 790
150.0 JS 53D151F400JS6 1011 820
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
