Preliminary Data Sheet Part Number 856330 1086 MHz SAW Filter Features * * * * * * * * For broadband access applications Usable bandwidth 10 MHz High attenuation No impedance matching required for operation at 200 Balanced operation Ceramic Surface Mount Package (SMP) Small size Package Pin Configuration Surface Mount 3.00 x 3.00 x 1.22 mm Bottom View 1 2 3 1.22 NOM. 1.32 MAX. 0.69 8 7 3.00 3.00 0.60 0.75 1.20 4 0.60 6 5 Pin No. 1 2 5 6 3,4,7,8 Description Input Input return Output Output return Case ground Rev B 18-Dec-2003 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Page 1 of 5 Part Number 856330 1086 MHz SAW Filter Preliminary Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical Maximum Unit - 1086 - MHz - 4 5 dB 1091 1073 1099 1081 MHz - 0.3 1.0 dB 50 52.5 40 40 35 65 70 55 60 40 - dB dB dB dB dB 61 71 - dB - 20 200 200 - ns Center Frequency Maximum Insertion Loss 1081 - 1091 MHz 1.5 dB Bandedges Lower Bandedge Upper Bandedge Amplitude Ripple (4) 1081 - 1091 MHz Stopband Rejection (Test Fixture) 500 - 988 MHz 988 - 1002 MHz 1038 - 1046 MHz 1156 - 1600 MHz 4167 - 4168 MHz Stopband Rejection (PCB) (5) 988 - 1002 MHz Group Delay Ripple 1081 - 1091 MHz Source Impedance (6) Load Impedance (6) Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the test circuit shown below. Testing is carried out using test fixture 971748, test data sheet 122288-02, to equipment specification 100221. In production, devices will be tested at room temperature in a Sawtek test fixture to a guardbanded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Maximum peak to adjacent valley over the defined frequency range. This rejection level is achieved on the Motorola V860DLS PCB. This value is correlated to the test specification of 52.5 dB on the Sawtek production test fixture. This is the optimum impedance in order to achieve the performance shown. Test Circuit: 1 200 Balanced Subject to change or obsolescence without notice 5 200 200 2 3,4,7,8 6 Rev B No impedance matching required 18-Dec-2003 Page 2 of 5 Preliminary Data Sheet Part Number 856330 1086 MHz SAW Filter Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev B 18-Dec-2003 Page 3 of 5 Part Number 856330 1086 MHz SAW Filter Preliminary Data Sheet Matching Schematics 1 200 Balanced 5 200 200 2 3,4,7,8 6 Marking PCB Footprint Marking code Sawtek logo .81 1.39 BN .96 JJJYM ID dot No impedance matching required 3.20 SQ .38 Date code .23 .81 The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel 2.7 12.8 4.0 ID dot O330 0.21 2.0 O1.5 A 1.75 5.5 O102 O20.2 O13.0 2.0 Direction of travel 12.0 3.25 Sawtek logo 1.4 3.25 4.0 A O1.5 Section A-A Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel Subject to change or obsolescence without notice Rev B 18-Dec-2003 Page 4 of 5 Part Number 856330 1086 MHz SAW Filter Preliminary Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure Links to Additional Technical Information PCB Layout Tips Qualification Flowchart Soldering Profile S-Parameters Other Technical Information Sawtek's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide network of sales offices, representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com Rev B 18-Dec-2003 Page 5 of 5