Preliminary Data Sheet
Part Number 856330
1086 MHz SAW Filter
Electrical Specifications (1)
Operating Temperature Range: (2) -40 to +85 oC
Parameter (3) Minimum Typical Maximum Unit
Center Frequency - 1086 - MHz
Maximum Insertion Loss
1081 - 1091 MHz
-
4
5
dB
1.5 dB Bandedges
Lower Bandedge
Upper Bandedge
-
1091
1073
1099
1081
MHz
Amplitude Ripple (4)
1081 - 1091 MHz
-
0.3
1.0
dB
Stopband Rejection (Test Fixture)
500 - 988 MHz
988 - 1002 MHz
1038 - 1046 MHz
1156 - 1600 MHz
4167 - 4168 MHz
50
52.5
40
40
35
65
70
55
60
40
-
-
-
-
-
dB
dB
dB
dB
dB
Stopband Rejection (PCB) (5)
988 - 1002 MHz
61
71
-
dB
Group Delay Ripple
1081 - 1091 MHz
-
20
-
ns
Source Impedance (6) - 200 -
Ω
Load Impedance (6) - 200 -
Ω
Notes:
1. All specifications are based on the test circuit shown below. Testing is carried out using test fixture 971748, test data sheet
122288-02, to equipment specification 100221.
2. In production, devices will be tested at room temperature in a Sawtek test fixture to a guardbanded specification to ensure
electrical compliance over temperature.
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
4. Maximum peak to adjacent valley over the defined frequency range.
5. This rejection level is achieved on the Motorola V860DLS PCB. This value is correlated to the test specification of 52.5 dB on the
Sawtek production test fixture.
6. This is the optimum impedance in order to achieve the performance shown.
Test Circuit:
200 Ω
Balanced
3,4,7,8
15
200 200
Ω
Ω
26
No impedance matching
required
Subject to change or obsolescence without notice Rev B 18-Dec-2003 Page 2 of 5