Precision Tweezer, Soldering and Rework System The Precision Tweezer has been ergonomically designed to be lightweight and easy to use for removing even the smallest of discrete components, such as 0201 packages. The Precision Tweezer has a double sided pivot for "true tweezer" action and a dual position pitch adjustment to help the operator target the component to skillfully complete the application. MFR-PTZ PRECISION TWEEZER, SOLDERING & REWORK SYSTEM Part No. Description MFR-PTZ, MFR-SRC, MFR-PST, MFR-STZ MFR-PTZ Precision Tweezer, Soldering and Rework System Ambient Operating Temperature:10- 40C Maximum Enclosure Temperature:55C INCLUDES Input Line Voltage:100- 240 VAC, grounded circuit MFR-PS1K Two Port Universal Voltage Power Supply MFR-HPT Precision Tweezer Hand-piece MFR-WSPT Tweezer Workstand Input Line Frequency:50/60 Hz Power Consumption:65 Watts max. Output Power: 50 Watts max. at 22C ambient temperature Output Frequency:450 KHz Power Cord 3-Wire:183cm (18/3") SJT Power Supply Dimensions w x d x h: MFR-HSR Cartridge Solder / Rework Hand-piece 122mm x 200mm x 152.5mm (4.8" x 8" x 6") Agency Tested Per:IEC 61000-6-1,EC 61000-6-3 and MFR-WSSR Soldering Workstand UL499, FCC CFR Part 15 Tip-to-Ground Potential:< 2mV Tip-to-Ground Resistance:< 2 ohms Contents subject to change without notice" Idle Temperature Stability: 1.1C in still air Hand-piece Cable Length: L=71cm (48"), burn proof, ESD safe Connector:8-pin power connector Precision Tweezer Cartridges Workstand Dimensions w x d x h: 100 mm x 200 mm x 100 mm (4" x 8" x 4") TFP-BLP1 Tweezer Cartridge, Blade 1.0mm (0.04") Pair With hand soldering, the task is to make a quality solder connection, without damaging the substrate and without negatively impacting throughput. All of the standard MFR Series power TFP-BLP2 tips & rework cartridges are designed for use Tweezer Cartridge, Blade 2.0mm (0.08") Pair with glass fiber (FR4) PCB substrates. This is denoted by the second letter in the part number: "F". For example: SFP-CH10, DFP-CN3, TFP-CNP1 Tweezer Cartridge, Conical 0.4mm (.015") Pair and SFV-CNL10. However, some specialist applications require working with thermally demanding or temperature sensitive substrates, such as Standard Tweezer Cartridges ceramic hybrids or flexible circuits. OK International has developed specialty heaters BLADE TIPS that quickly deliver the necessary power, but operate at temperatures that minimize the risk of substrate damage. These are denoted by TFP-BLH40 replacing the "F" in the part number with a "T" Heavy Duty Tweezer Pair for temperature sensitive or a "C" for demanding A=6.35mm (.25") loads. Please contact your local representative for information and availability of specialty tip heaters. For example: STP-CH10 and DCP-CN3. TFP-BLH50 Heavy Duty Tweezer Pair A=16mm (.62") F = Standard FR4 Substrate T = Temperature Sensitive C = Ceramic or Heavy Load TFP-BLH60 Heavy Duty Tweezer Pair A=20.5mm (.81") TFP-BLH70 Heavy Duty Tweezer Pair A=28mm (1.1") To order specialty versions of the Precision Tweezer Cartridges replace the "F" in the part number with the appropriate letter designate for your application when ordering: T = Temperature Sensitive C = Ceramic or Heavy Load Precision Tweezer Dimensions and artwork listed are for indication/guidance only. Numbers have been rounded up. Please contact your local technical support if you require specific technical information. Precision Tweezer in Action (c) 2007 OK International. All rights reserved.