Precision Tweezer, Soldering and Rework System
The Precision Tweezer has been ergonomically designed to be lightweight and easy to use for
removing even the smallest of discrete components, such as 0201 packages. The Precision Tweezer
has a double sided pivot for "true tweezer" action and a dual position pitch adjustment to help the
operator target the component to skillfully complete the application.
MFR-PTZ PRECISION TWEEZER, SOLDERING & REWORK SYSTEM
Part No. Description
MFR-PTZ Precision Tweezer, Soldering and Rework System
INCLUDES
MFR-PS1K Two Port Universal Voltage Power Supply
MFR-HPT Precision Tweezer Hand-piece
MFR-WSPT Tweezer Workstand
MFR-HSR Cartridge Solder / Rework Hand-piece
MFR-WSSR Soldering Workstand
Contents subject to change without notice"
Precision Tweezer Cartridges
MFR-PTZ, MFR-SRC, MFR-PST, MFR-STZ
Ambient Operating Temperature:10- 40°C
Maximum Enclosure Temperature:55°C
Input Line Voltage:100- 240 VAC, grounded circuit
Input Line Frequency:50/60 Hz
Power Consumption:65 Watts max.
Output Power:
50 Watts max. at 22°C ambient temperature
Output Frequency:450 KHz
Power Cord 3-Wire:183cm (18/3") SJT
Power Supply Dimensions w x d x h:
122mm x 200mm x 152.5mm (4.8" x 8" x 6")
Agency Tested Per:IEC 61000-6-1,EC 61000-6-3 and
UL499, FCC CFR Part 15
Tip-to-Ground Potential:< 2mV
Tip-to-Ground Resistance:< 2 ohms
Idle Temperature Stability:± 1.1°C in still air
Hand-piece Cable Length:
L=71cm (48"), burn proof, ESD safe
Connector:8-pin power connector
Workstand Dimensions w x d x h:
100 mm x 200 mm x 100 mm (4" x 8" x 4")
TFP-BLP1
Tweezer Cartridge, Blade 1.0mm (0.04") Pair
TFP-BLP2
Tweezer Cartridge, Blade 2.0mm (0.08") Pair
TFP-CNP1
Tweezer Cartridge, Conical 0.4mm (.015") Pair
Standard Tweezer Cartridges
BLADE TIPS
TFP-BLH40
Heavy Duty Tweezer Pair
A=6.35mm (.25")
TFP-BLH50
Heavy Duty Tweezer Pair
A=16mm (.62")
TFP-BLH60
Heavy Duty Tweezer Pair
A=20.5mm (.81")
TFP-BLH70
Heavy Duty Tweezer Pair
A=28mm (1.1")
To order specialty versions of the Precision Tweezer Cartridges replace the "F" in the part number
with the appropriate letter designate for your application when ordering:
T = Temperature Sensitive C = Ceramic or Heavy Load
With hand soldering, the task is to make a
quality solder connection, without damaging the
substrate and without negatively impacting
throughput. All of the standard MFR Series power
tips & rework cartridges are designed for use
with glass fiber (FR4) PCB substrates. This is
denoted by the second letter in the part
number: "F". For example: SFP-CH10, DFP-CN3,
and SFV-CNL10.
However, some specialist applications require
working with thermally demanding or
temperature sensitive substrates, such as
ceramic hybrids or flexible circuits. OK
International has developed specialty heaters
that quickly deliver the necessary power, but
operate at temperatures that minimize the risk
of substrate damage. These are denoted by
replacing the "F" in the part number with a "T"
for temperature sensitive or a "C" for demanding
loads. Please contact your local representative
for information and availability of specialty tip
heaters. For example: STP-CH10 and DCP-CN3.
F = Standard FR4 Substrate
T = Temperature
Sensitive
C = Ceramic or Heavy Load
Precision Tweezer
